Degassing Flux
Degassing Flux (SATA-PF-350)
General Description of Degassing Flux (SATA-PF-350)
Practice has proved that the hydrogen is the main cause of the pores in the aluminium alloy, the pores not only reduce the actual cross-sectional area of the casting, but also the source of the crack, so it is important part that removing the hydrogen during the smelting process.
SATA-degassing flux is a kind of traditional high efficiency degassing fluxfor aluminium and its alloys, it used for removing hydrogen and oxides from the aluminium melting.
Application of Degassing Flux (SATA-PF-350)
Plunge suitable quantity flux to the bottom (100mm from the bottom is better) of the melt, evenly and slowly remove the lunch, make the flux fully react with aluminium molten, stand or stir the molten for 10-15 min, the hydrogen and oxide will be taken out of aluminium molten.
Advantage of Degassing Flux (SATA-PF-350)
Easy operation, There are two options. One is with hexachloroethane in tablet form.and another is in powder form without hexachloroethane
It has excellent performance in refining, degassing and drossing
It can enhance the quality of casting, hydrogen content of aluminium molten can reduce to ≤0.1ml/100gAl, the oxide inclusion(Al2O3) can reduce 20% min, the casting inclusion defect reduce 50%min
Specification of Degassing Flux (SATA-PF-350)
White mixed powder
Aluminum degassing fluxis suit for all series alloy except high magnesium alloy,
Dosage: recommended dosage: 3%-5% large melting furnace, 4%-6% for crucible furnace
Working Temperature: 710℃-780℃
Package of Degassing Flux (SATA-PF-350)
Packed in 5kg (PE), 25kg (PP), 1000kg bags or customized.
Stored in dry, well-ventilated place, and avoid direct sunlight, keep sealed before using.
NOTE: This flux has serious hygroscopicity, please use immediately after opening.
Send product request
Other supplier products
 |
Multi-Functional Flux | General Description of Multi-Functional Flux MULTI-FUNCTIONAL FLUX is blended from natural de-hydrated salts with temperature reactive compounds. ... |
 |
Mg Remover Flux | General Introduction: Magnesium plays a very important part in producing the required physical properties of many , its presence in others is not r... |
 |
Ti Tablet | Ti Tablet General Description of Ti Tablet Titanium Tabletis used to adjust the content of Ti content in Aluminium Alloy, it is made by metal powde... |
 |
Fluxes for Magnesium Alloy | Magnesium alloy has a low melting point and small heat capacity. When heated in the air, it gets oxidized fast, and it is easy to burn when overhea... |
 |
Drossing Flux | Drossing Flux(SATA-PF-310) Description of Drossing Flux (SATA-PF-310) SATA drossing flux is specially developed for removing the slag from the alum... |
Same products
 |
LUBE SH-ONE-4S 400G for Fanuc Machines | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Lubecorp part number 249250 is a 400ml bellows style cartridge often times used in autolube appli... |
 |
Mobil Grease 28 Synthetic Aviation Grease | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Mobil grease 28is a high performance, antiwear grease. Available as a cartridge,2kgcan, 16kg pail... |
 |
Kluber Isoflex Topas NCA 5051 50ml Original Lubricants | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | ISOFLEX TOPAS NCA 5051is a beige synthetic long homogeneous and short fiber. It consists of a syn... |
 |
CHRISTO-LUBE MCG 111 2-OZ Valve Seal Grease | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Christo-Lube®MCG 111is a fully fluorinated grease thickened with PTFE which operates under ex... |
 |
Permatex 81160 85G High Temperature Resistant Resin | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Permatex 81160 High-Temp Red RTV Silicone Gasket, 3 oz |
