Injection Molding TPU
By cooperating with the injection grade TPU with molding ability and excellent sealing characteristics, entire product solution could be formed fast.
Technical Data of Injection Molding TPU
Technical Data Sheet |
Model |
|||||
Material Properties |
Test Standard |
Test Condition |
Unit |
1182B-RSS-1531S |
1182B-RSS-1531S |
|
General Characteristics |
Material Category |
- |
- |
- |
||
Appearance(Light/Semi-matte/Frosted) |
- |
- |
- |
|||
Extrusion/Injection |
- |
- |
- |
|||
Mechanical Properties |
Elongation |
ISO37:2017 |
200mm/min |
% |
518 |
462 |
Tensile Strength |
ISO37:2017 |
200mm/min |
Mpa |
|||
Tearing Strength |
ISO34-1:2015 |
500mm/min |
KN/m |
|||
Hot Air Aging |
Elongation Retention Rate |
ISO37:2017 |
- |
% |
||
Tensile Strength Retention Rate |
ISO37:2017 |
- |
% |
|||
Electrical Performance |
Volume Resistivity |
ASTM D257 |
- |
Ohm-cm |
||
Permittivity |
ASTM D150 |
- |
- |
|||
Combustion Performance |
Vertical Burning Test |
UL 94 |
- |
|||
Oxygen Index |
ASTM D2863 |
- |
% |
|||
Feature |
As a thermoplastic elastomer company, we provide atp polymer, tpu material injection molding, thermoplastic polyurethane injection molding, welding tpu, tpu moulding, tpu injection, tpu overmolding, polymer compound, tpe elastomero termoplastico and etc. For more informationabout tpu injection molding temperatureand tpu injection molding process, please feel free to contact us!
Send product request
Other supplier products
Injection Molding TPEs | Injection-grade TPE Products Characterization: High fluidity. Soft-touch. Overmolding compatibility with TPE/PP/PE cable. Application T... | |
High Temperature-resistance TPO | The modification of ATP for polyolefin elastomers mainly reflects the following technical characteristics: In the application of cable insulan... | |
Matte Surface TPU | UEN-M Series Matte TPU Applied Fields: High-end market TPU surfacewire & cable products with fine, homogeneous matte surface effect. Char... | |
TPEs from ATPolymer | Improve flame-retardant performance: It has obtained UL 94V0 grade yellow card certification (1.5mm-6.0mm), which fully supports the finished cable... | |
Silane Crosslinking LSZH | Silane cross-linked low-smoke halogen-free flame-retardant polyolefin cable material is convenient to use, not only can be quickly cross-linked und... |
Same products
Castrol Molub-Allloy Paste TA 1KG High temperature Lubricants | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | MOLUB-ALLOY™PASTE TAensures a good separating and sealing effect in high temperature and we... | |
Phenol Alkylation Plant | Seller: Hubei Sanli Fengxiang Technology Co., Ltd | Phenol Alkylation Plant Product Description Alkyl phenolis produced by the alkylation of phenol... | |
KYODO YUSHI PAREMAX SUPER 400G High Temperature Grease | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | KYODO YUSHIExtend Lubrication Life RMS-4VRare Max SuperGrease Cartridge (400g) for Bearings | |
Mobil CHASSIS GREASE LBZ 16KG Exhibits Excellent Flow even at very low tempe Eatures and in Long Pipelines | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Mobil Chassis Grease LBZis a semi-fluidgreasebased on synthetic oils in the consistency group NLG... | |
Mobil Velocite Oil No 6 Spindle Oil 16KG | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | KLUBER ISOFLEX NBU15 KLUBER ISOFLEX NBU15 KLUBER ISOFLEX TOPAS NCA52 75G KLUBER ISOFLEX TOPAS ... |