Injection Molding TPU
By cooperating with the injection grade TPU with molding ability and excellent sealing characteristics, entire product solution could be formed fast.
Technical Data of Injection Molding TPU
Technical Data Sheet |
Model |
|||||
Material Properties |
Test Standard |
Test Condition |
Unit |
1182B-RSS-1531S |
1182B-RSS-1531S |
|
General Characteristics |
Material Category |
- |
- |
- |
||
Appearance(Light/Semi-matte/Frosted) |
- |
- |
- |
|||
Extrusion/Injection |
- |
- |
- |
|||
Mechanical Properties |
Elongation |
ISO37:2017 |
200mm/min |
% |
518 |
462 |
Tensile Strength |
ISO37:2017 |
200mm/min |
Mpa |
|||
Tearing Strength |
ISO34-1:2015 |
500mm/min |
KN/m |
|||
Hot Air Aging |
Elongation Retention Rate |
ISO37:2017 |
- |
% |
||
Tensile Strength Retention Rate |
ISO37:2017 |
- |
% |
|||
Electrical Performance |
Volume Resistivity |
ASTM D257 |
- |
Ohm-cm |
||
Permittivity |
ASTM D150 |
- |
- |
|||
Combustion Performance |
Vertical Burning Test |
UL 94 |
- |
|||
Oxygen Index |
ASTM D2863 |
- |
% |
|||
Feature |
As a thermoplastic elastomer company, we provide atp polymer, tpu material injection molding, thermoplastic polyurethane injection molding, welding tpu, tpu moulding, tpu injection, tpu overmolding, polymer compound, tpe elastomero termoplastico and etc. For more informationabout tpu injection molding temperatureand tpu injection molding process, please feel free to contact us!
在线联系供应商
Other supplier products
TPEs from ATPolymer | Improve flame-retardant performance: It has obtained UL 94V0 grade yellow card certification (1.5mm-6.0mm), which fully supports the finished cable... | |
Anti-Mildew TPEs | Thermoplastic Polyether Ester ElastomerApplicable: most kinds of medical equipment and special equipment lines that have biocompatibility, microorg... | |
Foaming Ocean TPO | The modification of ATP for polyolefin elastomers mainly reflects the following technical characteristics: In the application of cable insulan... | |
High Hardness TPEs | Product description: high-hardness (≥90A) TPU materials, with problems of abnormal glue, surface scratches, uneven bright fog, surface tingling,... | |
High Temperature-resistance TPU | Fully support the cable pass UL 758/1581,80℃/105℃heat resistance test (113℃/136℃, 168Hrs) "Defender-TTM TPU series (1090T series) is halogen-fre... |
Same products
LUBE SH-ONE-4S 400G for Fanuc Machines | 卖方: 广东聚广恒自动化设备有限公司 | TheSH-ONEseries ofgreaseisoneof the latest released byLUBEand are used on a range of Fanuc machines | |
Mobil Grease 28 Synthetic Aviation Grease | 卖方: 广东聚广恒自动化设备有限公司 | Mobilgrease 28is the polyalphaolefin (PAO), clay-based multipurpose airframe and wheel bearing gr... | |
Kluber Isoflex Topas NCA 5051 50ml Original Lubricants | 卖方: 广东聚广恒自动化设备有限公司 | ISOFLEX TOPAS NCA 5051 is used in plain bearings in the automotive industry. ISOFLEX TOPAS NCA 50... | |
CHRISTO-LUBE MCG 111 2-OZ Valve Seal Grease | 卖方: 广东聚广恒自动化设备有限公司 | CHRISTO-LUBE®MCG 111Oxygen Compatible Grease is designed to protect components against extrem... | |
Permatex 81160 85G High Temperature Resistant Resin | 卖方: 广东聚广恒自动化设备有限公司 | PermatexHi-Temp RED RTV Silicone Gasket is designed to provide reliable “formed-in-place&rd... |