APAM-Anionic polyacrylamide
Description
This product is a water- soluble high polymer.It’s not soluble in most organic solvents, with good flocculatingactivity, and can reduce the friction resistance between liquid. It has two different forms, powder and emulsion.
Application Field
1. It can be used to treat industrial wastewater and mining wastewater.
2. It can also be used as an additive of the mud materials in oil-field, geological drilling and well boring.
Specifications
Application Method
Powder
1. The product should be prepared forthe water solution of 0.1% as concentration. It is better to use neutraland desalted water.
2. The product should be scattered evenly in the stirring water, and the dissolving can be accelerated bywarming the water (below 60℃).
3. The most economical dosage can be determined based on a preliminary test. The pH value of the water tobe treated should be adjusted before the treatment.
Emulsion
When diluting the emulsion in water, it is supposed to stir quickly to make the polymer hydrogel in the emulsion sufficiently contact with water and rapidly disperse in water. The dissolution time is around 3-15 minutes.
Package and Storage
Emulsion
Package: 25L, 200L, 1000L plastic drum.
Storage: The storage temperature of the emulsion is perfectly between 0-35℃. The general emulsion can be stored for 6 months. When the storage time is long, there will be a layer of oil deposited on the upper layer of the emulsion and it is normal. At this time, the oil phase should be returned to the emulsion by mechanical agitation, pump circulation, or nitrogen agitation. The performance of the emulsion will not be affected. The emulsion freezes at a lower temperature than water. The frozen emulsion can be used after it is melted, and its performance will not change significantly. However, it may be necessary to add some anti-phase surfactant to the water when it is diluted with water.
Powder
Package: The solid product can be packed in inner plastic bags, and further in polypropylene woven bags with eachbag containing 25Kg.
Storage: Should be sealed and stored in a dry and cool place below 35℃.
Send product request
Other supplier products
APAM-Anionic polyacrylamide | Description This product is a water- soluble high polymer.It’s not soluble in most organic solvents, with good flocculat... | |
PDADMAC | Description This product (technically named Poly dimethyl diallyl ammonium chloride) is cationic polymer in powder form or liq... | |
PAC-09 yellow powder PAC09 Al2O3≥30% Poly Aluminium Chloride Basicity 70.0—90.0 | Description This product is high-effective inorganic polymer coagulant. Application Field ... | |
PAM-Cationic Polyacrylamide | Description This product is an environmental friendly chemical .It’s not soluble in most organic solvents, with good flocculating a... | |
PAM-Nonionic Polyacrylamide | Description This product is a water- soluble high polymer.It is a kind of linear polymer with high molecular weight,low degree of hydroly... |
Same products
mbbr media | Seller: Hangzhou NIHAO Environmental Tech Co., Ltd | As a professional OEM factory and exporter of MBBR carriers, NIHAO MBBR carriers to many large en... | |
Surfactant | Seller: NANTONG REFORM PETRO-CHEMICAL CO.,LTD | Surface active agents are substances that lower the surface tension of a liquid, the interfacial ... | |
Petro Chemicals | Seller: NANTONG REFORM PETRO-CHEMICAL CO.,LTD | Petrochemical chemistry raw materials include petroleum and its distillates, condensate, natural ... | |
Flavors & Fragrances | Seller: NANTONG REFORM PETRO-CHEMICAL CO.,LTD | Bluebell fragrances & flavors are used to enhance the taste and smell of food, drinks, and ot... | |
Food Additives | Seller: NANTONG REFORM PETRO-CHEMICAL CO.,LTD | Artificial additivesrefer to the general term of chemical substances or substances used to improv... |