2K-MMA two-component acrylic adhesive
2K-MMA two-component acrylic adhesive is a structural adhesive with fast curing speed, high bonding strength, good toughness, and good aging resistance.
This type of adhesivecan cure at room temperature or high temperature. Under hot pressing, it can complete initial curing in 1-2 minutes. Under room temperature curing, it can reach a final strength of 30% in about 10 minutes.
It has a good bonding effect on various substrates, such as metal, plastic, glass, etc. 2K-MMA two-component acrylic adhesive is widely used for structural bonding in consumer electronics, such as laptops, tablets, mobile s, and TWS ears.
| Property | 2K-MMA Two-Component Acrylic Adhesive |
|---|---|
| Composition | Methyl methacrylate (MMA) monomer + curing agent (e.g., peroxide). |
| Curing Method | Room-temperature or heat-activated polymerization (exothermic reaction). |
| Key Applications | Structural bonding (metals, composites), automotive panels, aerospace components, loudspeaker magnet assembly. |
| Advantages | Rapid curing (minutes), high shear/peel strength, low-temperature flexibility, no volatile organic compounds (VOCs). |
| Limitations | Requires precise mixing ratio (short pot life after mixing), may yellow over time. |
| Distinct Features | Bonds dissimilar materials (e.g., metal-plastic), forms flexible yet strong joints, resists impact/vibration. |
Comparison with Epoxy:
Curing: 2K-MMA cures via polymerization (no external heat needed), while epoxy requires heat or specific conditions.
Flexibility: 2K-MMA retains flexibility post-cure, whereas epoxy is rigid.
Speed: 2K-MMA sets faster (2–5 minutes) than most epoxy systems.
Send product request
Other supplier products
 |
Butylated Urea Formaldehyde Resin | Introduction Butylated Urea-Formaldehyde Resin(BUF) is a modified product of urea-formaldehyde resin (synthesized by the polycondensation of urea ... |
 |
4-ADPA 4-Aminodiphenylamine CAS 101-54-2 | 101-54-2 –Names and Identifiers Name 4-Amino diphenylamine Synonyms azosaltrAzosalt RC.I. 76085C.I. 37240blackbasepLuxan Black ... |
 |
Polyester Clear Powder Coatings | This series of product are made of polyester resin (as hardener) and highly transparentmaterials. There are two types of products are suitable for ... |
 |
1,2-Bis(3-methylphenoxy)ethane CAS 54914-85-1 | CAS:54914-85-1, 54914-85-1 – Names and Identifiers Name 1,2-Bis-(3-methyl-phenoxy)ethane Synonyms F-203(EGTE)1,2-Bis-(m-tolylo... |
 |
MBTS (DM) CAS 120-78-5 | 120-78-5 –Names and Identifiers Name Accelerator (DM) Synonyms DMMBTSacceltmAccel TMAcceleratorDMAcelerator DMbenzothiazolylAcc... |
Same products
 |
4,4′-oxydiphthalic Anhydride(ODPA) CAS 1823-59-2 | Seller: Standard International Group (HK) Limited | Introduction 4,4 ‘-oxybis-phthalic anhydride is a white to white powder organic substance ... |
 |
Composite Material – Acrylic Instant Drying Adhesive | Seller: Standard International Group (HK) Limited | MT941/MT912/MT994 series: One component quick curing, solvent-free cyanoacrylate adhesive. The p... |
|
|
2K-MMA two-component acrylic adhesive | Seller: Standard International Group (HK) Limited | 2K-MMA two-component acrylic adhesive is a structural adhesive with fast curing speed, high bondi... |
 |
Adhesive for optical communication | Seller: Standard International Group (HK) Limited | In the field of fiber optic assembly industry, our product line includes single/two-component epo... |
 |
Camera adhesive | Seller: Standard International Group (HK) Limited | Introduction With the increasing demand for consumer electronics and the development of auto... |
