MSK-6000 Extra Fast Clear Coat
MSK-6000 Extra Fast Clear Coat
Automotive Paints Supplier
Product Name/Model:MSK-6000 Extra Fast Clear Coat.
Characteristic: Extra fast drying clear coate, high gloss and hardness, easy application, lowconsumption and high efficiency to ensure good profit, suitable for fast spots repair.
|
Substrates |
1K Basecoat. |
||||
|
Mixing Ratio |
Clear Coat |
Hardener |
Thinner |
||
|
2 |
1 |
||||
|
<25℃ |
6000 Extra Fast DryingClear Coat |
802 Extra Fast DryHardener |
90 Fast Thinner |
||
|
SprayViscosity |
14-16s todrop off, in 4# viscosity cup at 25°C, |
||||
|
Pot-Life |
At25°C,1.5 hour. |
||||
|
ReTreatment |
There are particlesorruns after spray, sand affected area with P2000 sand paperafter thorough drying, then polish to solve the problem. |
||||
|
Spray GunSet Up |
Gravity Feed: 1.2-1.5mm 4-5kg/cm²Suction Feed: 1.4-1.6mm 4-5kg/cm² |
||||
|
SprayTechnology |
Coats&Thickness: 2-3 coats, total 25-35umFlash-OffTime: At 25°C, 5-10 minutes between two coats,Air-Drying Time: Allow 10-15 minutes air drying time before force drying |
||||
|
Drying Time |
Temperature |
Dust Free |
Tack Free |
Tack Free |
Dry to Test |
|
25°C |
15 minutes |
2 hours |
4 hours |
5 days |
|
|
70°C |
3 minutes |
10 minutes |
15 minutes |
45 minutes |
|
|
Shelf Life |
2 years in original sealed can, cool and dry place at 20℃. |
||||
|
Package |
5L×4or2.5L×8or5L+2.5L+1L |
||||
Note:1. This products are extra fast reaction, after mixing clear coat with hardener, just add smallquantity of thinner for spraying, the mixture should be used up within 1 hour.2. The spray viscosity could not be too high, in case of paints defects, such as orange skin.3. This product is suitable for spots repairs, not suitable for overall repair.4. At temperature lower than 8°C, a forced dry by baking is recommended.5. It is recommended to apply at conditions of temperature lower than 25°C and humidity lowerthan 80%, otherwise there will be defects such as blisteringorblushing.6. The products mixed with hardener should be used up soon and can not be restore for futureuse; clean equipments immediately with thinner after application, otherwise it is very difficult tobe cleaned after dry.
Send product request
Other supplier products
| F400-1K Primer Surfacer | Auto Coatings Product Name/Model:F400-1K Primer Surfacer Characteristic: Fast drying one-component 1K Primer Surfacer with strong filling power, e... | |
| BYTF600-Plastic Primer | Auto Coatings Product Name/Model:BYTF600-Plastic Primer Characteristic: Single-component transparent fast drying primer, used to promote adhesion... | |
| BM1K Pearl Colors | BM1K Pearl Colors BOYET Series Product Name/Model:BM1K Pearl Colors Characteristic:BM1K Pearl Colors with excellent leveling property,easy const... | |
| BYT Clear Coat Series | BYT Clear Coat Series Auto Coatings Product Name/Model:BYT Clear Coat Series Characteristic:1、 BYT518 Clear Coat :Two- component 518 clear coat wi... | |
| MF910-Degreaser | 17、MF910-Degreaser Refinish Automotive Paint Product Name/Model:MF910-Degreaser Characteristic:Able to remove greaser, oil and other surface conta... |
Same products
| Parchment Paper Supplier | Seller: Brightime Global Limited | Parchment Paper Supplier Parchment Paper , also known as baking paper, is a versatile kit... | |
| Metallic flat high gloss Powder Coating MT-049/98010 | Seller: Standard International Group (HK) Limited | Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... | |
| Pure epoxy powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... | |
| Epoxy polyester powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... | |
| Pure polyester weather-resistant powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |













