MF-680 Extra Fast Clear Coat
MF-680 Extra Fast Clear Coat.
Automotive Paint company
Product Name/Model:MF-680 Extra Fast Clear Coat.
Characteristic:Extra fast drying clear coate, high gloss and hardness, easy application, lowconsumption and high efficiency to ensure good profit, suitable for fast spots repair.
|
Substrates |
1K Basecoat. |
||||
|
Mixing Ratio |
Clear Coat |
Hardener |
Thinner |
||
|
2 |
1 |
||||
|
＜25℃ |
680 Extra Fast DryingClear Coat |
681 Extra Fast DryHardener |
62 Fast Thinner |
||
|
SprayViscosity |
14-16s to drop off, in 4# viscosity cup at 25°C, |
||||
|
Pot-Life |
At 25°C, 1.5 hour. |
||||
|
Re-Treatment |
There are particlesorruns after spray, sand affected area with P2000 sand paperafter thorough drying, then polish to solve the problem. |
||||
|
Spray Gun Set Up |
Gravity Feed: 1.2-1.5mm 4-5kg/cm ²Suction Feed: 1.4-1.6mm 4-5kg/cm² |
||||
|
SprayTechnology |
Coats&Thickness: 2-3 coats, total 25-35umFlash-Off Time: At 25°C, 5-10 minutes between two coats,Air-Drying Time: Allow 10-15 minutes air drying time before force drying |
||||
|
Drying Time |
Temperature |
Dust Free |
Tack Free |
Dry to Handle |
Dry to Test |
|
25°C |
15 minutes |
2 hours |
4 hours |
5 days |
|
|
70°C |
3 minutes |
10 minutes |
15 minutes |
45 minutes |
|
|
Shelf Life |
2 years in original sealed can, cool and dry place at 20℃. |
||||
|
Package |
5L×4or2.5L×8or5L+2.5L+1L |
||||
Note:1. This products are extra fast reaction, after mixing clear coat with hardener, just add smallquantity of thinner for spraying, the mixture should be used up within 1 hour.2. The spray viscosity could not be too high, in case of paints defects, such as orange skin.3. This product is suitable for spots repairs, not suitable for overall repair.4. At temperature lower than 8°C, a forced dry by baking is recommended.5. It is recommended to apply at conditions of temperature lower than 25°C and humidity lowerthan 80%, otherwise there will be defects such as blisteringorblushing.6. The products mixed with hardener should be used up soon and can not be restore for futureuse; clean equipments immediately with thinner after application, otherwise it is very difficult tobe cleaned after dry.
Send product request
Other supplier products
 |
F400-1K Primer Surfacer | 1、F400-1K Primer Surfacer Automotive Paints Supplier Product Name/Model:F400-1KPrimer Surfacer Characteristic: Fast drying one-component 1K Pr... |
 |
BYTF608-Degreaser | BYTF608-Degreaser BOYET Series Product Name/Model:BYTF608-Degreaser Characteristic:Able to remove greaser, oil and other surface contamination... |
 |
BC1K Pearl Colors | BC1K Pearl Colors Automotive Refinish Coatings Product Name/Model:BC1K Pearl Colors Characteristic:BC1K Pearl Colors with excellent leveling p... |
 |
MSD-0912 1K Binder and MSD-0920 Flip Controller | MSD-0912 1K Binder andMSD-0920 Flip Controller Automotive Refinish Coatings Product Name/Model:MSD-0912 1K Binder andMSD-0920 Flip Controller ... |
 |
BC1K Silver Colors | BC1K Silver Colors Automotive Refinish Coatings Product Name/Model:BC1K Silver Colors Characteristic:BC1K Silver Color with excellent leveling... |
