MF-680 Extra Fast Clear Coat

MF-680 Extra Fast Clear Coat.

Automotive Paint company

Product Name/Model:MF-680 Extra Fast Clear Coat.

Characteristic:Extra fast drying clear coate, high gloss and hardness, easy application, lowconsumption and high efficiency to ensure good profit, suitable for fast spots repair.


1K Basecoat.

Mixing Ratio

Clear Coat






680 Extra Fast DryingClear Coat

681 Extra Fast DryHardener

62 Fast Thinner


14-16s to drop off, in 4# viscosity cup at 25°C,


At 25°C, 1.5 hour.


There are particlesorruns after spray, sand affected area with P2000 sand paperafter thorough drying, then polish to solve the problem.

Spray Gun Set Up

Gravity Feed: 1.2-1.5mm 4-5kg/cm ²Suction Feed: 1.4-1.6mm 4-5kg/cm²


Coats&Thickness: 2-3 coats, total 25-35umFlash-Off Time: At 25°C, 5-10 minutes between two coats,Air-Drying Time: Allow 10-15 minutes air drying time before force drying

Drying Time


Dust Free

Tack Free

Dry to Handle

Dry to Test


15 minutes

2 hours

4 hours

5 days


3 minutes

10 minutes

15 minutes

45 minutes

Shelf Life

2 years in original sealed can, cool and dry place at 20℃.



Note:1. This products are extra fast reaction, after mixing clear coat with hardener, just add smallquantity of thinner for spraying, the mixture should be used up within 1 hour.2. The spray viscosity could not be too high, in case of paints defects, such as orange skin.3. This product is suitable for spots repairs, not suitable for overall repair.4. At temperature lower than 8°C, a forced dry by baking is recommended.5. It is recommended to apply at conditions of temperature lower than 25°C and humidity lowerthan 80%, otherwise there will be defects such as blisteringorblushing.6. The products mixed with hardener should be used up soon and can not be restore for futureuse; clean equipments immediately with thinner after application, otherwise it is very difficult tobe cleaned after dry.


至: Guangzhou Zhenroumei Chemical Coatings Limited
Your E-mail:

Send to other suppliers

Other supplier products

MF912-1K Binder and MF920-Flip Controller
MF912-1K Binder and MF920-Flip Controller MF912-1K Binder andMF920-Flip Controller Refinish Automotive Paint Product Name/Model:MF912-1K Binder andMF920-Flip Controller Characteristic: MF...
BYTC15 Extra Fast Clear Coat.
BYTC15 Extra Fast Clear Coat. BYTC15 Extra Fast Clear Coat. Auto Coatings Product Name/Model:BYTC15 Extra Fast Clear Coat. Characteristic: Extra fast drying clear coate, high g...
MSD Series Thinner
MSD Series Thinner MSD Series Thinner Car Refinish Paint Product Name/Model:MSD Series Thinner Characteristic: High quality thinner, specially developed for primer, ...
MF605-Epoxy Primer
MF605-Epoxy Primer MF605-Epoxy Primer Automotive Paint company Product Name/Model:MF605-Epoxy Primer Characteristic: Good fillibility, easy sanding, give excelle...
BM1K Pearl Colors
BM1K Pearl Colors BM1K Pearl Colors BOYET Series Product Name/Model:BM1K Pearl Colors Characteristic:BM1K Pearl Colors with excellent leveling property,easy const...

Same products

PDC (Polycrystalline Diamond Compact) Cutter
PDC (Polycrystalline Diamond Compact) Cutter 卖方: Henan E-Grind Abrasives Co., Ltd. Polycrystalline diamond composite(PDC) E-Polycrystalline diamond composite(PDC) sheet is made of ...
Products 卖方: Henan E-Grind Abrasives Co., Ltd. E-Grind offers a full range of superabrasive, diamonds and CBN powders, as well as a variety of s...
PCD & PCBN 卖方: Henan E-Grind Abrasives Co., Ltd. PCD blanks for Cutting Tools E-Grind supplies the whole range of PCD blanks for cutting tool purp...
Metal Bond Micron Diamond
Metal Bond Micron Diamond 卖方: Henan E-Grind Abrasives Co., Ltd. Metal Bond Micron Diamond E-Grind's metal bond micron products offer good Roughing, Lapping and ...
Metal Bond Mesh Diamond
Metal Bond Mesh Diamond 卖方: Henan E-Grind Abrasives Co., Ltd. E-Grind's metal bond mesh diamondcombines both using life and working efficiency.Suitable for res...