PCD & PCBN
PCD blanks for Cutting Tools
E-Grind supplies the whole range of PCD blanks for cutting tool purpose. The largest Diameter available can be 55mm. Our PCD provides high wearing resistance ability and high finishing surface.
Our plant installs laser cutting machines and surface lapping and finishing machines to provide full service for PCD. With advanced inspecting machines of SEM, C-SCAN, X-Ray Diffractometer etc. Our plant applies strict Quality Control process.
Application of PCD:
Non-ferrous metals and alloys: Aluminum/gray iron composite, copper, Aluminum...
Nonmetallic materials: ceramics, plastic, rubber, chipboard...
PCD disc,
|
Product |
Diamond Content (Vol%) |
Product Properties |
Application |
|
ET02 |
≥92 |
Very good electrical discharge machining, general life, better heat resistance and impact resistance. |
Superfinishing, excellent surface processing quality for copper, bronze, aluminum, magnesium, magnesium aluminum alloy, plastic, precious metals, etc. |
|
ET05 |
≥92 |
Very good electrical discharge machining, general life, better heat resistance and impact resistance. |
Superfinishing, excellent surface processing quality for copper, bronze, aluminum, magnesium, magnesium aluminum alloy, plastic, plexiglass, etc. |
|
ET10 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Fine machining, very good surface processing quality, for aluminum alloy (Si content＜12%), copper alloy, composite wood processing, high-precision wear-resistant corbelled device, etc. |
|
ET25 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Used for composite, laminate flooring, nonmetal hard and brittle materials, carbide alloy, graphite and graphite composites, aluminum silicon alloy (Si content＞12%), the other high wear-resistant materials, such as ceramics, carbide, etc. |
|
ET35 |
≥95 |
Good electrical discharge machining, very long life, good heat resistance and impact resistance. |
Used for resin, composite materials, fiber reinforced plastics, high density reinforced board, silicon aluminum alloy and other high wear-resistant materials. |
|
ET302 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Used for composite, laminate flooring, nonmetal hard and brittle materials, carbide alloy, graphite and graphite composites, aluminum silicon alloy (Si content＞12%), the other high wear-resistant materials, such as ceramics, carbide, etc. |
Available specification
|
Grain size |
Application |
Grade |
Diameter |
Total thickness |
DIamond table thickness |
Woodworking |
Metalworking |
Conductive |
|
Ultra-fine micron structure for excellent surface finish requirements, |
ET085 |
45 |
√ |
|||||
|
55 |
√ |
|||||||
|
2μm |
For good surface finishing |
ET02 |
45 |
√ |
√ |
√ |
||
|
55 |
√ |
|||||||
|
5μm |
ET05 |
45 |
√ |
√ |
√ |
|||
|
10μm |
General purpose, balance cutting efficiency and life |
ET10 |
45 |
√ |
√ |
√ |
||
|
55 |
√ |
√ |
||||||
|
25μm |
Good wear resistance production,for high Si% Al alloy. |
ET25 |
45 |
√ |
√ |
√ |
||
|
55 |
√ |
√ |
||||||
|
302μm |
ET302 |
45 |
√ |
√ |
√ |
|||
|
55 |
√ |
√ |
||||||
|
35μm |
ET35 |
45 |
√ |
√ |
||||
|
55 |
√ |
PCBN (Polycrystalline Cubic Boron Nitride)
PCBN consists of CBN and Binder. It is produced in high pressure and high temperature. It has excellent performance in hardness, wearing resistance, thermal stability.Application: for hard ferrous materials (hardened steel, cast iron, high-temperature alloy, HSS, Powder metallurgy metals, Ni-Cr alloy...E-Grind provides two series of PCBN:1) Solid CBN2) CBN with Tungsten Carbide supporting.PCBN and SBN Grade
|
Grade |
CBN grit (μm) |
CBN content (Vol%) |
Processing way |
Application |
|
SBN95Z1 PCBN95Z1 |
20、30 |
Continuous cutting with large stock removal |
For Rough processing Grey Cast Iron, Chilled Cast Iron, Powder Sintered Alloy. |
|
|
SBN90Z PCBN90Z |
10、15 |
Continuous cutting with large stock removal |
For Rough process and semi-finishing processing the wear resistant cast iron, nodular cast iron etc. |
|
|
SBN90Z2 PCBN90Z2 |
10、15 |
Continuous cutting with large stock removal |
For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome iron and chilled steel with hardness HRC45-50. |
|
|
SBN80G |
3、5 |
Continuous cutting with Medium stock removal |
For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome iron and chilled steel with hardness HRC45-50. |
|
|
SBN70G PCBN70G |
3、5 |
Continuous cutting with small stock removal |
For finishing the chilled steel and high temperature alloy with HRC45-55. |
|
|
SBN60G |
1、3 |
Continuous cutting with small stock removal |
For finishing and super-finishing the chilled steel with HRC55-62 like bearing steel, tool steel, mold steel, gauge steel and HSS. |
|
|
SBN55G1 PCBN55G1 |
1、3 |
Slight non-continuous and continuous cutting with small stock removal |
For Finishing and super-finishing the chilled steel with HRC55-65, like bearing steel, tool steel, mold steel, gauge steel and HSS. |
PCBN Blank
Available specifications
|
SPEC |
D(Diameter) (mm) |
T(Thickness)(mm) |
t (CBN section thickness)（mm） |
PCBN55G1 |
PCBN70G |
PCBN90Z |
PCBN90Z2 |
PCBN95Z1 |
|
Ф45×1.2×0.6 |
45 |
√ |
√ |
√ |
√ |
√ |
||
|
Ф45×1.6×1.0 |
45 |
√ |
√ |
√ |
√ |
√ |
||
|
Ф45×3.2×1.0 |
45 |
√ |
√ |
√ |
√ |
√ |
||
|
Ф45×3.8×1.0 |
45 |
√ |
√ |
√ |
√ |
√ |
||
|
Ф45×4.5×1.0 |
45 |
√ |
√ |
√ |
√ |
√ |
Solid PCBN (SBN)Available specifications
|
Spec |
Dimension (mm) |
ISO |
Code |
||||||||
|
L |
Фd |
S |
SBN55G1 |
SBN60G |
SBN70G |
SBN80G |
SBN90Z |
SBN90Z2 |
SBN95Z1 |
||
|
SNMN090300 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
||||
|
5 |
SNMN090400 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
|||
|
13×5 |
13 |
13 |
5 |
SNMN120400 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
|
SNMN150700 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
||||
Disc
|
Spec |
Dimension (mm) |
ISO |
Code |
||||||||
|
Фd |
S |
SBN55G1 |
SBN60G |
SBN70G |
SBN80G |
SBN90Z |
SBN90Z2 |
SBN95Z1 |
|||
|
5 |
RNMN060400 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
|||
|
RNMN090300 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
||||
|
5 |
RNMN090400 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
|||
|
13×5 |
13 |
5 |
RNMN120400 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
|
Square
|
Spec |
Dimension(mm) |
ISO |
Code |
|||||||
|
L |
Фd |
S |
SBN55G1 |
SBN60G |
SBN70G |
SBN80G |
SBN90Z |
SBN90Z2 |
||
|
5 |
CNMN090400 |
√ |
√ |
√ |
√ |
√ |
√ |
|||
|
13×5 |
13 |
13 |
5 |
CNMN120400 |
√ |
√ |
√ |
√ |
√ |
√ |
|
13×8.2 |
13 |
13 |
CNMN120800 |
√ |
√ |
√ |
√ |
√ |
√ |
|
Equilateral triangle
|
Spec |
Dimension(mm) |
ISO |
Code |
||||||||
|
L |
Фd |
S |
SBN55G1 |
SBN60G |
SBN70G |
SBN80G |
SBN90Z |
SBN90Z2 |
SBN95Z1 |
||
|
TNGN110300 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
||||
|
5 |
TNGN160400 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
|||
80° Equilateral hexagon
|
Spec |
Dimension (mm) |
ISO |
Code |
||||||||
|
L |
Фd |
S |
SBN55G1 |
SBN60G |
SBN70G |
SBN80G |
SBN90Z |
SBN90Z2 |
SBN95Z1 |
||
|
9×5 |
9 |
5 |
WNMN080400 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
|
55° Rhombus
|
Spec |
Dimension (mm) |
ISO |
Code |
||||||||
|
L |
Фd |
S |
SBN55G1 |
SBN60G |
SBN70G |
SBN80G |
SBN90Z |
SBN90Z2 |
SBN95Z1 |
||
|
5 |
DNUN110400 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
|||
|
DNUN110600 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
||||
|
DNUN150600 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
||||
Quality Control
C-SCANE-Grind supplies an ultrasonic scan photo for each piece of product, which helps customer optimise the cutting areas.
E-Grind Abrasives is one of professional abrasive powder suppliers. We provide Diamond Powder, CBN Powder, china abrasives, pcd pcbn, pcbn material, pcd cutting tool blanks, material pcd, pcd sales, pcd metal, pcd products, pcbn cutting tools, diamond diesand so on. Want to know more? Please contact us.
Send product request
Other supplier products
 |
PDC (Polycrystalline Diamond Compact) Cutter | PDC Cutter(Polycrystalline Diamond CompactCutter) PDC cutter contains polycrystalline diamond layer and tungsten carbide backing. It features both ... |
 |
Metal Bond Micron Diamond | What Is Diamond Powder? Metal Bond Micron Diamond E-Grind's metal bond micron products offer good Roughing, Lapping and finishing results. For... |
 |
CBN Mesh Powder | CBN ranks the second in hardness following Diamond. CBN has premium performance in thermal conductivity, durability and chemical inertness. It is u... |
 |
PCD PCBN INSERT | We supply various types of PCD & PCBN Inserts for AUTO Engine Machining Industry, Aerospace Industry, Moto-cycle Industry etc. With ISO 9001:2... |
 |
Saw Grit Diamond | Our Saw Grit series are with cube-octahedron particles, for stone and construction engineering industries such as Granite, Marble, Concrete, Asphal... |
Same products
 |
Matte (Zero-Gloss) Powder Coatings-Elegant Durable Non-Reflective | Seller: Standard International Group (HK) Limited | Our matte (zero-gloss) powder coatings are ideal for a wide range of applications, including furn... |
 |
Textured Powder Coatings – Factory Direct MOQ 100KG | Seller: Standard International Group (HK) Limited | Our textured powder coatings are perfect for a wide range of applications, including furniture, a... |
 |
Fire Pits & Stoves Powder Coatings | Seller: Standard International Group (HK) Limited | When it comes to fire pits, stoves, and other high-temperature appliances, the quality of the pow... |
 |
Aluminum Profile Powder Coating for Architectural Applications | Seller: Standard International Group (HK) Limited | When it comes to aluminum profiles, whether for windows, doors, curtain walls, or industrial fram... |
 |
Light Color Powder Coating – Durable & Customizable Finishes | Seller: Standard International Group (HK) Limited | Why Choose Light Color Powder Coatings? Light color powder coatings, including white, ivory, bei... |
