PCD & PCBN
PCD blanks for Cutting Tools
E-Grind supplies the whole range of PCD blanks for cutting tool purpose. The largest Diameter available can be 55mm. Our PCD provides high wearing resistance ability and high finishing surface.
Our plant installs laser cutting machines and surface lapping and finishing machines to provide full service for PCD. With advanced inspecting machines of SEM, C-SCAN, X-Ray Diffractometer etc. Our plant applies strict Quality Control process.
Application of PCD:
Non-ferrous metals and alloys: Aluminum/gray iron composite, copper, Aluminum...
Nonmetallic materials: ceramics, plastic, rubber, chipboard...
PCD disc,
|
Product |
Diamond Content (Vol%) |
Product Properties |
Application |
|
ET02 |
≥92 |
Very good electrical discharge machining, general life, better heat resistance and impact resistance. |
Superfinishing, excellent surface processing quality for copper, bronze, aluminum, magnesium, magnesium aluminum alloy, plastic, precious metals, etc. |
|
ET05 |
≥92 |
Very good electrical discharge machining, general life, better heat resistance and impact resistance. |
Superfinishing, excellent surface processing quality for copper, bronze, aluminum, magnesium, magnesium aluminum alloy, plastic, plexiglass, etc. |
|
ET10 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Fine machining, very good surface processing quality, for aluminum alloy (Si content＜12%), copper alloy, composite wood processing, high-precision wear-resistant corbelled device, etc. |
|
ET25 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Used for composite, laminate flooring, nonmetal hard and brittle materials, carbide alloy, graphite and graphite composites, aluminum silicon alloy (Si content＞12%), the other high wear-resistant materials, such as ceramics, carbide, etc. |
|
ET35 |
≥95 |
Good electrical discharge machining, very long life, good heat resistance and impact resistance. |
Used for resin, composite materials, fiber reinforced plastics, high density reinforced board, silicon aluminum alloy and other high wear-resistant materials. |
|
ET302 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Used for composite, laminate flooring, nonmetal hard and brittle materials, carbide alloy, graphite and graphite composites, aluminum silicon alloy (Si content＞12%), the other high wear-resistant materials, such as ceramics, carbide, etc. |
Available specification
|
Grain size |
Application |
Grade |
Diameter |
Total thickness |
DIamond table thickness |
Woodworking |
Metalworking |
Conductive |
|
Ultra-fine micron structure for excellent surface finish requirements, |
ET085 |
45 |
√ |
|||||
|
55 |
√ |
|||||||
|
2μm |
For good surface finishing |
ET02 |
45 |
√ |
√ |
√ |
||
|
55 |
√ |
|||||||
|
5μm |
ET05 |
45 |
√ |
√ |
√ |
|||
|
10μm |
General purpose, balance cutting efficiency and life |
ET10 |
45 |
√ |
√ |
√ |
||
|
55 |
√ |
√ |
||||||
|
25μm |
Good wear resistance production,for high Si% Al alloy. |
ET25 |
45 |
√ |
√ |
√ |
||
|
55 |
√ |
√ |
||||||
|
302μm |
ET302 |
45 |
√ |
√ |
√ |
|||
|
55 |
√ |
√ |
||||||
|
35μm |
ET35 |
45 |
√ |
√ |
||||
|
55 |
√ |
PCBN (Polycrystalline Cubic Boron Nitride)
PCBN consists of CBN and Binder. It is produced in high pressure and high temperature. It has excellent performance in hardness, wearing resistance, thermal stability.Application: for hard ferrous materials (hardened steel, cast iron, high-temperature alloy, HSS, Powder metallurgy metals, Ni-Cr alloy...E-Grind provides two series of PCBN:1) Solid CBN2) CBN with Tungsten Carbide supporting.PCBN and SBN Grade
|
Grade |
CBN grit (μm) |
CBN content (Vol%) |
Processing way |
Application |
|
SBN95Z1 PCBN95Z1 |
20、30 |
Continuous cutting with large stock removal |
For Rough processing Grey Cast Iron, Chilled Cast Iron, Powder Sintered Alloy. |
|
|
SBN90Z PCBN90Z |
10、15 |
Continuous cutting with large stock removal |
For Rough process and semi-finishing processing the wear resistant cast iron, nodular cast iron etc. |
|
|
SBN90Z2 PCBN90Z2 |
10、15 |
Continuous cutting with large stock removal |
For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome iron and chilled steel with hardness HRC45-50. |
|
|
SBN80G |
3、5 |
Continuous cutting with Medium stock removal |
For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome iron and chilled steel with hardness HRC45-50. |
|
|
SBN70G PCBN70G |
3、5 |
Continuous cutting with small stock removal |
For finishing the chilled steel and high temperature alloy with HRC45-55. |
|
|
SBN60G |
1、3 |
Continuous cutting with small stock removal |
For finishing and super-finishing the chilled steel with HRC55-62 like bearing steel, tool steel, mold steel, gauge steel and HSS. |
|
|
SBN55G1 PCBN55G1 |
1、3 |
Slight non-continuous and continuous cutting with small stock removal |
For Finishing and super-finishing the chilled steel with HRC55-65, like bearing steel, tool steel, mold steel, gauge steel and HSS. |
PCBN Blank
Available specifications
|
SPEC |
D(Diameter) (mm) |
T(Thickness)(mm) |
t (CBN section thickness)（mm） |
PCBN55G1 |
PCBN70G |
PCBN90Z |
PCBN90Z2 |
PCBN95Z1 |
|
Ф45×1.2×0.6 |
45 |
√ |
√ |
√ |
√ |
√ |
||
|
Ф45×1.6×1.0 |
45 |
√ |
√ |
√ |
√ |
√ |
||
|
Ф45×3.2×1.0 |
45 |
√ |
√ |
√ |
√ |
√ |
||
|
Ф45×3.8×1.0 |
45 |
√ |
√ |
√ |
√ |
√ |
||
|
Ф45×4.5×1.0 |
45 |
√ |
√ |
√ |
√ |
√ |
Solid PCBN (SBN)Available specifications
|
Spec |
Dimension (mm) |
ISO |
Code |
||||||||
|
L |
Фd |
S |
SBN55G1 |
SBN60G |
SBN70G |
SBN80G |
SBN90Z |
SBN90Z2 |
SBN95Z1 |
||
|
SNMN090300 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
||||
|
5 |
SNMN090400 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
|||
|
13×5 |
13 |
13 |
5 |
SNMN120400 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
|
SNMN150700 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
||||
Disc
|
Spec |
Dimension (mm) |
ISO |
Code |
||||||||
|
Фd |
S |
SBN55G1 |
SBN60G |
SBN70G |
SBN80G |
SBN90Z |
SBN90Z2 |
SBN95Z1 |
|||
|
5 |
RNMN060400 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
|||
|
RNMN090300 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
||||
|
5 |
RNMN090400 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
|||
|
13×5 |
13 |
5 |
RNMN120400 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
|
Square
|
Spec |
Dimension(mm) |
ISO |
Code |
|||||||
|
L |
Фd |
S |
SBN55G1 |
SBN60G |
SBN70G |
SBN80G |
SBN90Z |
SBN90Z2 |
||
|
5 |
CNMN090400 |
√ |
√ |
√ |
√ |
√ |
√ |
|||
|
13×5 |
13 |
13 |
5 |
CNMN120400 |
√ |
√ |
√ |
√ |
√ |
√ |
|
13×8.2 |
13 |
13 |
CNMN120800 |
√ |
√ |
√ |
√ |
√ |
√ |
|
Equilateral triangle
|
Spec |
Dimension(mm) |
ISO |
Code |
||||||||
|
L |
Фd |
S |
SBN55G1 |
SBN60G |
SBN70G |
SBN80G |
SBN90Z |
SBN90Z2 |
SBN95Z1 |
||
|
TNGN110300 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
||||
|
5 |
TNGN160400 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
|||
80° Equilateral hexagon
|
Spec |
Dimension (mm) |
ISO |
Code |
||||||||
|
L |
Фd |
S |
SBN55G1 |
SBN60G |
SBN70G |
SBN80G |
SBN90Z |
SBN90Z2 |
SBN95Z1 |
||
|
9×5 |
9 |
5 |
WNMN080400 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
|
55° Rhombus
|
Spec |
Dimension (mm) |
ISO |
Code |
||||||||
|
L |
Фd |
S |
SBN55G1 |
SBN60G |
SBN70G |
SBN80G |
SBN90Z |
SBN90Z2 |
SBN95Z1 |
||
|
5 |
DNUN110400 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
|||
|
DNUN110600 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
||||
|
DNUN150600 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
||||
Quality Control
C-SCANE-Grind supplies an ultrasonic scan photo for each piece of product, which helps customer optimise the cutting areas.
E-Grind Abrasives is one of professional abrasive powder suppliers. We provide Diamond Powder, CBN Powder, china abrasives, pcd pcbn, pcbn material, pcd cutting tool blanks, material pcd, pcd sales, pcd metal, pcd products, pcbn cutting tools, diamond diesand so on. Want to know more? Please contact us.
在线联系供应商
Other supplier products
 |
PCD & PCBN | E-Grind supplies the whole range of PCD blanks and PCD PCDNfor cutting tool purpose. The largest Diameter of PCD blanks and PCDN blanks available c... |
 |
Diamond Powder | The diamond powder uses are wide. Industrial diamond powderhas the characteristics of high thermal stability, high chemical stability, good conduct... |
 |
CVD Diamond | CVDdiamond(chemical vapor deposition diamond). The mixture of carbon-containing gas and oxygen is excited and decomposed at a high temperature and ... |
 |
TSP(Thermally Stable Polycrystalline Diamond) | TSP diamondis made of diamond micro powder and a small amount of binder sintered under high temperature and high pressure. It has high wear resista... |
 |
TSP(Thermally Stable Polycrystalline Diamond) | TSP diamondis made of diamond micro powder and a small amount of binder sintered under high temperature and high pressure. It has high wear resista... |
Same products
 |
Metallic flat high gloss MT-049/98010 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
