2k Dosing And Spraying 2 Part Thermally Dispensing System Automatic Dispensing Glue Machine With Hand Held Gun Potting Machine
2k Dosing And Spraying 2 Part Thermally Dispensing System Automatic Dispensing Glue Machine With Hand Held Gun Potting Machine
- Vacuum material-feedingsystemor diaphragm pump feeding system
- High precision pump metering system
- Dynamic/Static mixing system
- Three-axis motion system
- Programming control system.
AB-componentmaterialsflows into the pump through the feedingsystem (AB tanks) separately by the self-suction force of the metering pump.
- Vacuum material-feedingsystem
- High precision pump metering system
- Dynamic/Static mixing system
- Manual dispensing by glue gun or pedal .
AB-componentmaterialsflows into the pump through the feedingsystem (AB tanks) separately by the self-suction force of the metering pump.
Strong versatility/Multiple configuration/High production capacity/High precision
- Auto feeding :take use of vacuum pressure to feed materials into A&B tank separately.
- Tank Stirring :A and B tank configure with stirring motors and blades to prevent material sediment in the tank bottom .
- Heating :Tank , pipe , pumps are optional with heaters to assure the whole system can be heating from room temperature to 90°C adjustable.
- Vacuum :A &B tank vacuum for degas the bubble inside material .
- Dynamic mixing :Configuring dynamic motor and mixer to mix A and B fluids evenly.
Advantages:
1,Accuratedmetering and even mixing helps to avoid the waste ofmaterial.
2,Dispensingvolumeand positioning keep machine work consistent and fast.
3,Good universality
4,Easy to program and operate.
5,Tally function, non-standard mode, primer mode, level alert, filter mode, liquid display device, preventing back-flow device and other functional device.
- Applications:
Potting&isolation&Casting: electronics componnets , PCB board, Capacitor, power supply, transformer, ignition coil, reverse sensor, circuit board,filter products ,underwater parts,electronic ballast ,aviation parts,aerospaceparts....
Transformer , capacitance , power module , regulating plate ,protection module , generator , pressure package , soli relay ,fault indicator , Sensors , junction box , clutch , wave filter , water meter , boattery cover , rectifier and so on ...
1Kand 2-component polyurethanes, epoxies, acrylics, silicones, temperature, humidity and UV curing materials.
Two component potting materials ,2-partcompound materials,AB partcompound materials,2Ksilicones,2Kepoxiesresin,Bi-componentPU,Ployerster,Polyurethane,UV materialsand so on .
Machine description and working principle
Compound materialsA & B are kept in two tanks separately. There are two sets of metering pumps inside the machinefor metering A and B resin by setting ratio, draining outmaterialindividually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data.
Send product request
Other supplier products
 |
Glue Spraying Machine for Insulation Composite Board | Glue Spraying Machine for Insulation Composite Board The glue Spraying line is based on the reform of the traditionalroller glue machine process... |
 |
Cleanroom Handmade Steel Panel with Rockwool/ PU/EPS/Paper Honeycomb/Aluminum Honeycomb | Cleanroom Handmade Steel Panel with Rockwool/ PU/EPS/Paper Honeycomb/Aluminum Honeycomb The glue Spraying line is based on the reform of the tra... |
 |
2 components dispensing machine vacuum pump for dispenser glue machine meter mix dispenser Our AB Potting machine helps AB compounds offer superior protection for electronic circuits industry Our Un | Resin dispensing Aresin dispensing systemis a technical installation to processcasting resinfor the purpose of filling, sealing, covering or... |
 |
2 Part Metering Mixing and Dispensing Machine PU Resin Dynamic Polyurethane Dosing System Automatic Epoxy Resin Filling Machine Electronic Potting Machine | What is the difference between 2K AB adhesive materials manual potting machine and robot pottingmachine ? AutomaticAB potting machine is composed ... |
 |
Ab Part PU Pouring Machine Polyurethane Resin Machine Potting and Dispensing | We offers an automatic dosing machine for degassing, proportioning, mixing and high precision dosing of two component resins (epoxy, polyurethane... |
Same products
 |
Material Handling Kubota Pump | Seller: ZHEJIANG JINRUI PUMP INDUSTRY CO., LTD. | The Material Handling Kubota Pump delivers exceptional performance for industrial equipment requi... |
|
|
2k Dosing And Spraying 2 Part Thermally Dispensing System Automatic Dispensing Glue Machine With Hand Held Gun Potting Machine | Seller: 824681 | 2k Dosing And Spraying 2 Part Thermally Dispensing System Automatic Dispensing Glue Machine With ... |
 |
Mini Oil Refinery | Seller: Peiyang Chemical Equipment Co., Ltd. | Catalog of Mini Mobile Oil Refinery Mode Capacity (BPD) Power (Kw/d) Fa... |
 |
Hydroskimming Refinery | Seller: Peiyang Chemical Equipment Co., Ltd. | Catalog of Hydroskimming Oil BPDrefinery Mode Capacity (BPD) Power (Kw/d) ... |
 |
MODULAR REFINERY | Seller: Peiyang Chemical Equipment Co., Ltd. | PCC's Modular Refineries are designed and fabricated in our manufacturing base located in Tianjin... |
