silicone coated fiberglass fire resistant sleeve with velcro
500°F/260°C Continuous Exposure: Higher Intermittent
AS1072 GradeAerostylesilicone fire sleeve
silicone fire sleevewith velcrowas specially developed to meet the fire resistance requirements of FAATSO - C53a OR TSO - C75.
Aerostyle Fire Sleevecan withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C).
Sheds splash immediately
Aerospace AS1072 Grade Fire Sleeve withstands repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). The heavy coating of our proprietary iron oxide red silicone rubber compound sheds molten metal splash immediately, so very little heat transfer occurs.
Withstands intense radiant heat and flame
Aerospace AS1072 Grade Fire Sleeve will withstand continuous exposure to 500° F (260°C); up to 2000°F (1090°C) for 15-20 minutes; and up to 3000°F (1650°C) for 15-30 seconds. When exposed to flame, the silicone rubber transforms into a crust, creating a protective SiO2 refractory layer.
Aerostyle Fire Sleeveis constructed from high bulk glass fiber braided sleeve. Excellent modulus of elasticity makes it an excellent choice for bundling hoses, tubes and cables in a variety of hostile environments.
Protect your personnel and cut your energy loss
Aerospace AS1072 Grade silicone coated fiberglass fire resistant sleeve with velcrois insulation properties provide personnel with effective protection against burns from hot hoses and flexible steam lines, while reducing heat energy losses.
Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product
Proudly Made By BST Thermal Protection Products Co.,Ltd
See all BSTFLEX fire sleeve here
Fire Sleeve With Metal Snap Closure
在线联系供应商
Other supplier products
 |
Fuel Line Heat Sleeve | Fire Protection Fibreglass Braided Sleeveis designed to protect hoses,wires and cables from the hazards of high heat and occasional flame.Fire Slee... |
 |
Titanium Exhaust Wrap | TheTitanium fiber Exhaust Wrapis constructed from fragmentized lava rock that is extruded into the fibers to create a heat wrap that will give you ... |
 |
fire resistant heat sleeve | 500°F/260°C Continuous Exposure: Higher Intermittent fuel line protection heat sleeve Industry Fire sleeve is designed to protect hoses,wir... |
 |
titanium Exhaust Header Wrap | 1200°F / 648°C Continuous Exposure: Higher IntermittentExhaust Pipe Heat Shield Wrapis made from pulverized lava rock and stranded into a f... |
 |
heat sleeve | 500°F/260°C Continuous Exposure: Higher Intermittent fiberglass heat sleeve Industry heat sleeveis designed to protect hoses,wires and... |
