Finger Joint Assembler
| TECHNICAL PARAMETERS |
MHB1560 |
| Max. working size(L x W x H) |
6100x 150x 80 mm |
| Min. working size(L x W x H) |
2000 x 30 x 15mm |
| Main saw blade size |
φ355mm |
| Main saw spindle speed |
3700 rpm |
| Working air pressure |
0.5--0.8 Mpa |
| Saw blade spindle motor power |
3kw |
| Oil pump motor power |
2.2kw |
| Feeding motor power |
1.5kw |
| Total power |
6.7KW |
| Max. jointing force |
7800KG |
The second push part of finger joint assembler adopts long+short double pushing board design,by this kind of structure,it can assemble very short workpiece to reduce the cost.
The machine is controlled by PLC, boasts streamlined execution, reliable control and simple operation.
Tel：
/> Website：
Other supplier products
|
|
Veneer splicing machine |
Veneer Stitching Machine can use glue make two small veneer to be one piece,veneer splicer widely used in furniture and plywood industry. Core ven... |
|
|
Four Side Moulder |
Four Side Moulder Product Introduction:
Features:
TRS-1200TB Four Side Moulder built with horizontal top 7.5HP & bottom 5.5HP moulder h... |
|
|
Profile wrapping machine |
Profile wrapping machine can be used to wrap PVC on the profile of wood material and aluminum plastic material and froth material.
Characteristi... |
|
|
Sliding Table Saw |
Solution Apply to processing all kinds of density boards, shaving boards, wood-based panels, ABS panels, PVC panels, organic glass plates and so... |
|
|
High-Frequency Clamp Carrier |
Wide application: Can be applied in finger joint board joining, door edge banding, "L" type door pocket line, door panel, particle board and ML7... |
供应产品
Same products
