.

MTHPA WNY1001

Our company produces a new type of liquid organic acid anhydride epoxy resin curing agent with excellent performance Methyl tetrahydrophthalic anhydride (MTHPA, MeTHPA). Because the anhydride curing agents for epoxy resinshavebetter heat resistance and chemical stability than the amine curing agent, and can maintain excellent physical and electrical properties at higher temperatures. In recent years, anhydride hardenerhas been insulated with the motor, electronics and electrical industries. The continuous improvement of structural reliability requirements has led to the rapid development of the application of such curing agents. The specific introduction of our MTHPA product WNY-1001 is below:

Chemical Name: Methyl tetrahydrophthalic anhydride (MTHPA, MeTHPA)

Specification: WNY-1001

Molecular formula: C9H10O3

Molecular weight: 166.178

CAS No.: 26590-20-5 11070-44-3

EC:247-830-1

PHYSICAL AND CHEMICAL PROPERTIES:

-High purity and light color: The color of epoxy resin products is light yellow, which can be directly produced or produced into various colors required.

-Low viscosity: Good processing properties for casting, potting, winding, bonding, lamination, impregnation, molding and dipping. A large amount of filler can be added during casting to make the cured product excellent in performance.

-Stable performance, low solidifying point, long application period: long-term storage at room temperature.

-Low toxicity: Toxicity is only one-twentieth to one-fortyth of the amine curing agent.

-Low volatility: Sealed preservation.

-Low heating loss.

-Good mutual solubility: This product can be miscible with all epoxy resins, the mixing viscosity is low, and the shrinkage rate of the system is small when heated and cured.

-Application: More suitable for white encapsulation.

TECHNICAL DATA SHEET:

Item

WNY1002

WNY1001

WNY1008

Appearance

light yellow transparent liquid, no mechanical impurities.

Color(Pt-Co)

300#Max

200#Max

Density (g/cm3, 20℃)

FreezingPoint(℃)

-15Max

0Max

Viscosity (Pa.s, 25℃)

Acid Value(mgKOH/g)

660-685

Anhydridecontent

Volatile content(120℃)

Free acid

* Above are standard grades, anhydride mixtures and different isomer structures can be offered.(Mixture of 3- and 4- Isomers)

As a one of the most professional epoxy resin and hardener manufacturers, WSX Chemicalcovers an area of 4 acres with more than 60 employees. We have four advanced production lines and our annual production capacity is 30000 tons, is the largest manufacturer of MTHPA products in China. We sincerely invite and welcome people from all around the world to invest and create more values together.



在线联系供应商

至: JIAXING NANYANG WANSHIXING CHEMICAL CO.,LTD.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

MTHPA
MTHPA Do you know how to use epoxy resin and hardener? Our MTHPA product of WNY-1008 series is widely used in epoxy potting materials, casting materials...
MTHPA
MTHPA OVERVIEW Methyl tetrahydrophthalic anhydride (MTHPA, MeTHPA) is a new type of liquid organic acid anhydride epoxy resin curing agent with excellen...
MTHPA
MTHPA OVERVIEW Methyl tetrahydrophthalic anhydride (MTHPA, MeTHPA) is a new type of liquid organic acid anhydride epoxy resin curing agent with excellent...
MTHPA
MTHPA OVERVIEW Methyl tetrahydrophthalic anhydride (MTHPA, MeTHPA) is a new type of liquid organic acid anhydride epoxy resin curing agent with excellent...
MTHPA
MTHPA Our company produces a new type of liquid acid anhydride curing agent treatmentwith excellent performance Methyl tetrahydrophthalic anhydride (MTHP...
供应产品

Same products

Excellent CATV amplifier module
Excellent CATV amplifier module 卖方: Shenzhen Sanland Technology Co.,Ltd.    Established in 2002-10-29, Shenzhen Sanland Technology Co.,Ltd. [hereinafter referred to as SA...
High purity sodium fluoride(99%)
High purity sodium fluoride(99%) 卖方: 河南省有色金属国际贸易有限公司 High purity sodium fluoride is a white powder or crystal. It is used as food addtive, toothpaste ...
Carbon Steel CNC Machining Parts
Carbon Steel CNC Machining Parts 卖方: Ningbo Hewcho Industrial Limited Basic Info. Trade Term: EXW,FOB,CIF.CFR Payment Term: T/T,L/C, Western Union Delivery Time:7-30da...
Brass CNC Milling Parts
Brass CNC Milling Parts 卖方: Ningbo Hewcho Industrial Limited Basic Info. Trade Term: EXW,FOB,CIF.CFR Payment Term: T/T,L/C, Western Union Delivery Time:7-30da...
Brass CNC Machining Parts
Brass CNC Machining Parts 卖方: Ningbo Hewcho Industrial Limited Basic Info. Trade Term: EXW,FOB,CIF.CFR Payment Term: T/T,L/C, Western Union Delivery Time:7-30da...