Dosing Pump Manufacturer
Types of Dosing Pump For Sale
NEWDOSE can provide you with a wide range of high-quality dosing pumps to meet all your needs. Our featured dosing pumps includes solenoid driven diaphragm metering pumps, motor dosing pumps, ND type mechanical motor dosing pumps, ecodose type mechanical motor dosing pumps, ND electric stroke adjusters.
Dosing Pump Faqs
How to set the pressure of the dosing pump safety valve?
The value of the safety valve should be in the range of the working pressure of the pump, cannot adjust the pressure higher than the max pressure of the pump. If the max working pressure of the pump is 3Bar, the safety valve should be set as 3 Bar, or lower than 3Bar. Over-pressure is one of the reasons that cause the broken of the pump.
What's the float switch of dosing pump and its function?
The float switch is a very important device to control the liquid level of the tank. The float switch can automatically control the start and stop of the pump according to the variation of required liquid level, with no need of a special person to care about, making operation quite easy.
When the level is lowered, the float sinks, and the contact point inside the switch is closed. This contact point can be used to control the metering pump. For example, it can stop the metering pump 1 and start the metering pump 2. On the other hand, it also can indicate that the cartridge is empty by turning on the alarm/indicator light. And the float switch can be applied to the tank to indicate that the tank is full and to stop the metering pump.
What types of dosing pumpdo you offer？
lNEWDOSE pump has two types, solenoid driven and motor-driven dosing metering pump, the capacity range is 1~6000Lph.
lWhat are the accessories come with the dosing pumps?
lFor solenoid dosing pump, there are filter, sprayer, connectors, and pipes in the accessory kit.
lThe motor-driven pumps don’t be equipped with any accessories. It has to choose the other parts according to the installation situation.
How to select a dosing pump?
lConfirm the flow rate of the solution (how much liters of the solution should be transferred in one hour?)
lCheck the main characteristics of the solution, such as corrosivity, viscosity, concentration, and temperature.
lConfirm the pressure of the dosing system.
lConfirm the suction height.
lCheck if the dosing system needs any signal control, such as pulse signal, 4-20mA signal, or RS485.
What's the function of pulsation damper?
To select one proper size of pulsation damper could decrease at least 90% pulse, which makes the liquid flow more stable. Equipped with pulsation damper can help to slow down the accelerated speed of the flow and protect the pump head.
How to adjust the back-pressure valve?
Do not make the pressure value higher than the max working pressure of the pump can hold.
When there is pressure in the suction point, adjust the pressure of the injection point is 1bar higher than the suction point.
Ark Electric & Mechanical Co., Ltd (ARK LTD) is a professional dosing pump supplier, we provide dosing pump china, diaphragm metering pump, china dosing pump, automatic metering pump, metered dose pumpand etc. Want to buy dosing pumpor know dosing pump cost? Please contact us.
在线联系供应商
Other supplier products
 |
Low Pressure Dosing Pump | Low pressure dosing systemcan be used on many occasions with strict requirements. Moreover, technological progress, industrial development, and aut... |
 |
Sulfuric Acid Metering Pump | Sulfuric acid is a kind of active binary inorganic strong acid, which can react with most metals. High-concentration sulfuric acid has strong water... |
 |
Manual Dosing Pump | Manual Dosing Pump Introduction Of Manual Metering Pump The flow rate of the manual metering pump is constant and can be manually adjusted. The f... |
 |
Diaphragm Pump | Introduction of Diaphragm Pumps The Diaphragm Pump of NEWDOSE can make the operation of it more safe and reliable by adding auxiliary valves and a... |
 |
Water Dosing Pump | The Features Of The Liquid Dosing Pump No leakage The liquid dosing pump uses a non-mechanical shaft seal, so there is no leakage. Output ... |
Same products
 |
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | 卖方: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... |
 |
Common Rail injector control valve F00VC01303 | 卖方: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina#Stainless Steel Cylindrical Pin##Denso Common... |
 |
Common Rail injector control valve F00VC01200 | 卖方: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina#Stainless Steel Cylindrical Pin##Denso Common... |
 |
Injector Control Valve Plate 24# | 卖方: China Lutong Part Plant | Injector Control Valve Plate 24# Tina#Stainless Steel Cylindrical Pin##Denso Common Rail Injecto... |
 |
Injector Control Valve Plate 12# | 卖方: China Lutong Part Plant | Injector Control Valve Plate 12# Tina#Stainless Steel Cylindrical Pin##Denso Common Rail Injecto... |
