Adapter Charger Housing Mold 496-1
Mould Name: Adapter Charger Housing Mould
Part Material: PC
Product Size: 58.3*57.9*8.6mm
Product Description: Adapter Charger Housing UK
Mould Cavity: 4 Cavities
Mould Size: 400*450*343MM
Suitable Injection Machine: 160 ton
Mould Cavity Steel: ASSAB8407
Mould Injection System: Cold runner w/ tunnel gate
Mould Ejection System: Ejector Pin
Mould Cycle Time: 26's
Mould Life Cycle: 500,000
Lead Time: 60 days
Mould Features: 8 Sliders
Adapter mold is also AC charger mold, HanKing has made a lot of such moulds. For the adapter mold or AC charger mould, the appearance is important as well as the part dimension.
What issues should be noted in the tooling design?
First, we should choose the parting line of the part, parting line in cavity side, and parting line in the core side and it's very important to get customers' approval for the parting line.
The mold designer must choose the appropriate gate position and diameter of the gate according to the structure of the product and the requirements of the clients. For this charger mould, we normally suggest using point gate.
How to release the plastic adapter from the mould also requires careful consideration by the designer. Designers must carefully study the structure of the product, using sliders, lifters and ejection mechanisms to help the product smoothly get out of the mold cavity.
Manufacturing tips: shut-off angle along the slider moving direction as well as polishing the steel along the direction of product removal.
When some areas make the mould ejection out difficulty, find out the solution and send a proposal to the customer.
Try to make insert in the complicate area and to confirm the split line of insert pin with customers.
Reasonable use of ejector pin, ejector sleeve, ejector blade, etc. mechanisms, the distribution of the ejector pin should be even and balance.
The texture and polish are different in the cavity and core of the mould.
Most of the time, the plastic part drawing from the customer is not designed with a draft angle, we should propose to increase the draft angle within the allowable range.
It should be recessed on the bottom surface to avoid sink mark because of the wall thickness of the pillars.
The designer should check if any ribs or holes are not able to put ejector pin.
Sharp steel is must be avoided.
HanKing Mould has excellent experience in Adapter Charger Mould, we made Adapter Mould for different country standard, good water cooling to get the beautiful part surface, and automatic ejection.
HanKing Mouldis a professional ac mould engineering limitedand chinese plastic injection molding companies, we provide hanking mould technology, automotive plastic mould, automobile mouldand etc. Want to know more? Please contact us.
在线联系供应商
Other supplier products
 |
Precision Mould | ABS Mold ABS full name Acrylonitril Butadiene Styrene copolymer, with excellent comprehensive physical and mechanical properties, excellent low tem... |
 |
Double Shot Plastic Injection Mold Products | HanKing Mould Enginering Ltd. started the business in the year of 1996 as one of the chinese plastic injection molding companiesin the line of mold... |
 |
Two Shot Molding Parts | Two Shot Tool Construction Part two shot tool construction saves the injection machine quantity and plant area, lower the labor cost and minimize t... |
 |
Two Shot Molding Parts | Two Shot Tool Construction Part two shot tool construction saves the injection machine quantity and plant area, lower the labor cost and minimize ... |
 |
Precision Mould | How to build a plastic precision mould? We have been manufacturing plastic precision moulds and componentsfor more than ten years. With our expe... |
Same products
 |
Microcrystalline wax used for packaging protection | 卖方: Syntop chemical Co.,Ltd. | Microcrystalline wax is a versatile industrial wax suitable for a wide range of applications, wit... |
 |
Super Impeller aerator (water- cooled motor) | 卖方: Taizhou Jinhu Mechanical & Electrical Co., Ltd. | Taizhou Jinhu Mechanical & Electrical Co., Ltd. offers the Super Impeller Aerator (Water-Cool... |
 |
Microcrystalline wax used as physical antioxidant and processing aid | 卖方: Syntop chemical Co.,Ltd. | The core function of industrial-grade microcrystalline wax is to serve as a modifier, thickener, ... |
 |
"China factory Conductivity electrode T6J4B3 for power station | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China factory Conductivity electrode T6J4B3 for power station Selection of advanced technology, ... |
 |
Microcrystalline wax with high melting point and good stability | 卖方: Syntop chemical Co.,Ltd. | Microcrystalline wax with a high melting point has a wide range of applications, and its core val... |
