AlNiCo Magnets
alnico magnets china
china alnico magnets
alnico magnets for sale
Category: alnico magnets China, China alnico magnets
Advantages: high magnetic energy, good temperature stability
Disadvantages: very low coercive force,easy to be demagnetized, magnetic circuit design can not use thin disc magnets, and must be assemblied first then overall magnetized
AlNiCo magnet is the earliest developed permanent magnetic material, it is an alloy of Al, Ni, Co, Fe and another rare metal element. AlNiCo permanent magnets birthed in 30 years of 20 Century, its magnetic property is best in the years, so it was most widely used in permanent magnetic motors. But that application in motors was replaced step by step when ferrite permanent magnets and rare earth magnets produced. And the proportion of AlNiCo application for motors went down. For AlNiCo magnets, the ability of corrosion resistant is good, surface treatment is not needed for it. It usually made into cylinder AlNiCo magnets or block AlNiCo magnets. The advantages of AlNiCo magnets are high remanence (maximum up to 1.35T) and low-temperature coefficient(-0.02%/℃), maximum working temperature is around 520℃, the magnetic properties change caused by temperature change is very small. The disadvantages of AlNiCo are low coercivity (normally lower than 160KA/m), and the demagnetize curve is not linear, it is easy to be magnetized and also easy to be demagnetized.
According to the different production methods, it classified as sintered AlNiCo magnets and cast AlNiCo magnets. Cast AlNiCo can be machined into different shapes and sizes, for all kinds of permanent magnets, cast AlNiCo magnets have the lowest Temp.Coefficient, its working temperature can be up to 600 degrees. Cast AlNiCo magnets are used for kinds of instruments and meters, auto parts,electric-acoustic, teaching field etc.
Compared with cast AlNiCo magnets, sintered AlNiCo magnets suit for making complex shapes and smaller sizes,the size tolerance for sintered AlNiCo magnets is smaller and better than cast AlNiCo magnets. For sintered AlNiCo magnets, the process is simple and it can be pressed into needed size directly.The property of sintered AlNiCo magnets is lower than cast AlNiCo magnets, but sintered AlNiCo magnets more suitable for machine.Sintered AlNiCo magnets are wide used on instruments and meters, comm unicate,magneto-electricity switch, and kinds of transducers.
|
Type |
(BH)Max |
Br |
Hcb |
D |
a(Br) |
Tc |
Tw |
|||
|
KJ/cm3 |
MGOe |
mT |
Gs |
KA/m |
Oe |
g/cm3 |
﹪/K |
℃ |
℃ |
|
|
LN9 |
680 |
6800 |
30 |
380 |
-0.03 |
760 |
450 |
|||
|
LN10 |
600 |
6000 |
40 |
500 |
-0.03 |
760 |
450 |
|||
|
LNG12 |
720 |
7200 |
45 |
500 |
-0.03 |
810 |
450 |
|||
|
LNG13 |
700 |
7000 |
48 |
600 |
-0.03 |
810 |
450 |
|||
|
LNG34 |
1200 |
12000 |
48 |
600 |
-0.02 |
860 |
525 |
|||
|
LNG37 |
1200 |
12000 |
48 |
600 |
-0.02 |
860 |
525 |
|||
|
LNG40 |
1250 |
12500 |
48 |
600 |
-0.02 |
860 |
525 |
|||
|
LNG44 |
1250 |
12500 |
52 |
650 |
-0.02 |
860 |
525 |
|||
|
LNG52 |
1300 |
13000 |
56 |
700 |
-0.02 |
860 |
525 |
|||
|
LNGT28 |
1000 |
10000 |
58 |
720 |
-0.025 |
860 |
550 |
|||
|
LNGT36J |
700 |
7000 |
140 |
1750 |
-0.025 |
860 |
550 |
|||
|
LNGT32 |
800 |
8000 |
100 |
1250 |
-0.025 |
860 |
550 |
|||
|
LNGT40 |
800 |
8000 |
110 |
1380 |
-0.025 |
860 |
550 |
|||
|
LNGT60 |
900 |
9000 |
110 |
1380 |
-0.025 |
860 |
550 |
|||
|
LNGT72 |
1050 |
10500 |
112 |
1400 |
-0.025 |
860 |
550 |
|||
We are a holding magnets manufacturer,we hope our products can benefit you.
Now we have strong fishing magnets for sale, if you have any needs, contact us.
在线联系供应商
Other supplier products
 |
Magnetic Hooks | Based on different structure features, there are magnetic tool hooks available: magnetic carabiner hooks, reversible magnetic hooks, rotate magneti... |
 |
Mono-Pole Magnets | Product Category: mono pole magnets / single pole magnets Product Features: strong magnets, flat round magnets, only one side has magnetism Avail... |
 |
Magnetic Grate Separators/Magnetic Grid Separators | Magnetic grate also is known as the magnetic shelf, magnetic frame, magnetic stand and magnetic hopper grate. Magnetic grate separatorsare assem... |
 |
AlNiCo Magnets | Category: AlNiCo magnets/metal perpament magnets Advantages: high magnetic energy, good temperature stability Disadvantages: very low coerciv... |
 |
Adhesive Magnets | Adhesive magnets(adheisve backed magnets) are used more and more in industry. What is an adhesive magnet? The adhesive has no magnetism itself. Adh... |
Same products
 |
Microcrystalline wax used for rubber plastic processing and modification | 卖方: Syntop chemical Co.,Ltd. | Microcrystalline wax has a wide range of industrial applications, primarily in the areas of rubbe... |
 |
Microcrystalline wax 80A used for lubrication and demolding | 卖方: Syntop chemical Co.,Ltd. | The core industrial applications of microcrystalline wax 80A are primarily focused on rubber prot... |
 |
Tyvek Flat Roll Pouch | 卖方: Hopeway AMD | Tyvek Flat Roll Pouch is designed for professional sterilization packaging, offering clean handli... |
 |
Industrial Warehouse Ceiling Fans | 卖方: Hebei Windmax Power Technology Co., Ltd. | Industrial Warehouse Ceiling Fans Industrial Warehouse Ceiling Fans for Warehouses, Logisti... |
 |
HVLS Ceiling Fan for Railway Station | 卖方: Hebei Windmax Power Technology Co., Ltd. | HVLS Ceiling Fan for Railway Station for Railway Station All units are CE-certified, manufa... |
