Metallurgical Furnace
CIC’s equipment includes leading standardized heavy equipment and machinery products and related heavy machinery services, which can be sold directly to end customers, business partners, and EPC projects. As a professional heavy equipment companies, CIC serves multiple roles, such as, cement machinery suppliers, mining machinery manufacturers, grinding mill manufacturer, rotary kiln manufacturer, rotary dryer manufacturer, sludge dryer manufacturer and so on.
CIC main advantage in nonferrous metallurgical furnacelies in the manufacture of horizontal rotary furnace, Rotary refining furnace and bottom blown furnace. Rotary furnace is the main metallurgical equipment used to treat copper and nickel sulfide in nonferrous metallurgical production. The rotary furnace does not need fuel, and only relies on the heat released by the oxidation reaction of iron and sulfur in copper and sulfur with the air blown into the solution to provide all the heat expenditure.
Instruction of Metallurgical Furnace
Rotary refining furnace is mainly used for refining liquid crude copper. The refining operation generally includes four stages: feeding, oxidation, reduction and casting. The product is to provide a qualified anode plate for copper electrolytic refining. Therefore, rotary refining furnace is also called a rotary anode furnace.
The main characteristics of rotary refining furnace are simple structure, large furnace capacity, high degree of mechanical automation, strong controllability, good sealing and low energy consumption. Rotary refining furnace is mostly used in pyrometallurgical refining of large or extra large copper smelters.
Structure of Metallurgical Furnace
The horizontal rotary furnace is a kind of smelting equipment for blowing matte or nickel into coarse copper or high matte in the smelting process of non-ferrous metals such as copper and nickel. Its specification is expressed by the output of each furnace. The furnace body is cylindrical (see Fig. 1), and a furnace mouth is set in the middle for charging, smoke exhaust, slag discharge and discharging. A row of tuyeres is set at the furnace side along the horizontal direction to blow in the air. The lining of the horizontal converter is made of magnesia or chrome magnesia refractory.
Rotary refining furnace is mainly composed of furnace body, supporting device, drive and control system. The main supporting equipment includes combustion device, combustion air system, oxidant, reductant, steam, compressed air, cooling water and process piping (as shown in Figure 2 below)
The cylindrical furnace body is provided with a furnace mouth for charging and discharging copper. The furnace mouth is equipped with a furnace cover. The furnace cover is only opened when charging and discharging copper. The melting period, oxidation period and reduction period are all covered. A small amount of tuyere is set on the side of the furnace body, high-pressure air is introduced in the oxidation period, and the reducing agent is introduced in the reduction period. When the tuyere is not in operation, it is placed above the melt surface. When the redox operation is carried out, the furnace is tilted to make the tuyere embedded in the melt. The rotary refining furnace needs an external heat supply, so it is equipped with a fuel combustion device and exhaust port.
Related Issues of Metallurgical Furnace
What are the masonry methods of the horizontal rotary furnaces?
There are two kinds of masonry methods: rotary furnace body construction method and arch tire construction method. The construction procedure is to build the end wall first, then the circular liner, and finally the furnace mouth. Before the liner of the furnace is built, the driving device of the furnace body must pass the trial operation and be locked; The gap between the end cover of the furnace shell and furnace body should be plugged with asbestos rope. The circular liner and end wall shall be dry laid with staggered joints, and the brick joint shall not be greater than 1.5 mm. The staggered joints between tuyere and furnace mouth shall be wet-laid, and the brick joint shall be no more than 2 mm.
What are the construction preparations for the rotary refining furnace?
The refining furnace is a complete set of equipment in the smelter, which is used together with a smelting furnace and rotary furnace. Generally, one smelting furnace is equipped with three rotary furnaces and two refining furnaces. Due to the simple shape of rotary refining furnace and there are not many brick types involved, except for a small number of special-shaped bricks at the furnace mouth, redox mouth, copper outlet and other parts, most of them are standard bricks, so the construction is relatively simple. The amount of maintenance is not very large, and the number of maintenance is less than that of the rotary furnace. Some fixed construction facilities of smelting furnace and rotary furnace and the working platform around refining furnace can be used.
Before the construction of the rotary refining furnace, the inner diameter of the metal shell, transmission device, supporting device, the control system must be carefully checked, and the furnace can be built only after it is confirmed to be completely normal.
Case Parts of Metallurgical Furnace
Equipment |
Type |
Name of Client/Project |
Rotary Furnace |
Φ4.4×14.6 |
China Nerin Engineering Co., Ltd |
Φ4.2×14 |
China YUN Copper Co., Ltd |
|
Φ4.5×14.5 |
China Nerin Engineering Co., Ltd |
|
Aluminum Corporation of China |
||
Rotary Refining Furnace |
Φ4.5×13.5m |
China YUN Copper Co., Ltd |
Chinalco Southeast Copper |
||
Lufang Shandong,China |
||
Φ4.2×13.5m |
Yuguang Gold & Lead Henan China |
|
Qinghai Copper |
||
Guangxi Nanguo Copper |
||
China Nerin Engineering Co., Ltd |
||
China YUN Copper Co., Ltd |
||
Φ4.2×13 m |
China Nerin Engineering Co., Ltd |
|
Φ2.4×3m |
China Nerin Engineering Co., Ltd |
|
Bottom Blown Furnace |
Φ5.2×23m |
Yuguang Gold & Lead Henan China |
Φ4.8×23m |
Dongying Lufang, Shandong, China |
|
Φ4.4×13.5m |
China YUN Copper Co., Ltd (Yimen) |
|
Φ3.6×16m |
Neimenggu Ruifeng Co., Ltd |
|
Φ3.6×14m |
China-Tin Group |
|
Φ3×14.6m |
Lead Industry in Chenzhou, Hunan Province |
|
Φ3×13.5m |
Shandong Fangyuan Non-ferrous Metals Group |
|
Φ3×11m |
||
Φ3×8m |
Yuguang Gold & Lead Henan China |
在线联系供应商
Other supplier products
Vertical Centrifuge | The vertical centrifuge machineis made up of the screen which diameter range from 700 to 1,000 mm , the rotor body (including the blade), transmiss... | |
Metallurgical Furnace | CIC main advantage in nonferrous metallurgical furnacelies in the manufacture of horizontal rotary furnace, Rotary refining furnace and bottom blow... | |
Metallurgical Furnace | CIC’s equipment includes leading standardized heavy equipment and machinery products and related heavy machinery services, which can be sold ... | |
Industrial Centrifuge Machine | Centrifugal concentrator is a kind of equipment for gravity separation of ore particles in a centrifugal force field, which is one of the high-effi... | |
Furnace Tapping Machine | + We developed the discharge furnace robotic arm machine, based on the working process and tools of manual operation of slag port opening and clos... |
Same products
DM-16BF DM-18BF New cover Electric Sprayer | 卖方: Zhejiang Huaqi Information Technology Co., LTD | The Electric Knapsack Sprayer is a game-changer in the field of agricultural pest control. Engine... | |
Simple Round Breeding Cage | 卖方: Zhejiang Huaqi Information Technology Co., LTD | The Simple Round Breeding Cage features a durable and lightweight construction, making it suitabl... | |
叙利亚-细胞储存液氮容器-液氮液位报警器 | 卖方: 河南天之道生物科技有限公司 | 精准的实验条件与安全的样本存储是科研工作顺利开展的关键要素。其中,细胞储存液氮罐作为实验室不可缺少的一种设备,在样本保存方面发挥着重要的作用。 实验室用的细胞储存液氮罐,航空铝制造,重量轻、占用... | |
意大利-液氮细胞储存罐-液氮罐液位报警器 | 卖方: 河南天驰仪器设备有限公司 | 精准的实验条件与安全的样本存储是科研工作顺利开展的关键要素。其中,细胞储存液氮罐作为实验室不可缺少的一种设备,在样本保存方面发挥着重要的作用。 实验室用的细胞储存液氮罐,航空铝制造,重量轻、占用... | |
埃及-细胞储存液氮罐-液氮液位监测仪 | 卖方: Henan Tianzhidao Biological Technology Co., Ltd. | 精准的实验条件与安全的样本存储是科研工作顺利开展的关键要素。其中,细胞储存液氮罐作为实验室不可缺少的一种设备,在样本保存方面发挥着重要的作用。 实验室用的细胞储存液氮罐,航空铝制造,重量轻、占用... |