.

Dental Instrument

Basic Dental Equipment

We have a variety of instruments and equipment for tooth preparation, dental extraction forceps, surgical scissors, probes, orthodontic tools, syringes, spatulas,they are widely used in all kinds of dental surgery.

Explorers

The Explorers are used to probe the lesions on teeth surface and gingiva.

Periodontal Files

Periodontal files are commonly used in dental procedures for cutting and smoothing.

Excavators

The eviscerator is used to remove the crown pulp and the necrotic part of the gingiva during pulp treatment.

Cement Spatulas

It is used for mixing cement powder and denture powder when filling teeth in dental department.

Cement Pluggers

Cement plugers are used to press backfill material into the target location. A hand appliance having a tapering working part, a rounded cross section and a flat end. Reusable.

Gingival Separator

The product is mainly used for separation of gingiva and periosteum.

Mouth Mirrors Handle

After the product is connected with the mouth lens, it can be used by the stomatologist for the oral examination of the patient.

Scalers

It is made of a working end and a handle, available in single and double ends, and is made of stainless steel.

Cutter

It is made of a working end and a handle, available in single and double ends, and is made of stainless steel.

Sharpening Stone

A tool used to sharpen the edge of an instrument to restore sharpness.

Amalgam Pluggers

A hand appliance having a tapering working part, a rounded cross section and a flat end. Reusable.

Burnishers

Dental lab tools instrumentsused to remove excess prosthetic material and smooth the rough surface of the oral prosthesis. Reusable.

Dental Chisels

A cutting tool consisting of a shank and a cutting head having a beveled sharp edge. Reusable.

Bone Curettes

Composed of a handle and a spoon-like head, the working end is in the shape of a sharpened and passivated spoon-piece with a semicircular cross-section, made of stainless steel. Reusable.

Mallet

It is a dental mallet made mainly of stainless steel and can be reused.

Wax Carvers

MaterialMade of high quality stainless steel material.

Apical Elevators

It is used to pry the teeth loose, pry the root, residual root, broken root tip.

Laboratory Hammer

It is used in dental technician laboratories.

Denture Duplicators

MaterialCopperModel07-0100 Denture duplicators.

Amalgam Carrier

It is used to collect and store material in a plastic state for delivery to dental instruments ready to fill holes. Reusable.

Crown Remover

It consists of a head and a handle and is made of stainless steel and copper. Reusable.

Mouth Mirrors

The product is composed of lens, frame and mirror rod.

Matrix Retainer

It is made of stainless steel and copper, which hold dental material in place of the tooth. It can be used repeatedly by forming sheet clamp and forming sheet.

Water Jet

When used, it is installed on the front end of the spray gun of the dental chair, which is the outlet end of the airflow of the spray gun.

Airjet

When used, it is installed on the front end of the spray gun of the dental chair, which is the outlet end of the airflow of the spray gun.

Vacuum Cleaner Type

It is composed of tube body and joint. It is in tubular form and can be used repeatedly.Product usageUsed to flush the surgical site and to attract waste fluid during surgical operations.

Nerve Broach

It is used for clamping nerve broach in oral surgery.Product materialThe products are made of the materials specified in GB/T4423-2007 or GB/T1220.

Bone Chisels

It is a cutting tool, composed of a shank and a cutter head, the cutter head is a beveled sharp edge. Reusable.

Aspirating Syringes

It is supplied to the single-use needle-less injection system for subcutaneous needle-less injection.

Agar Impression Syringes

It is used to collect and store material in a plastic state for delivery to dental instruments ready to fill holes. Repeatable to use.

Luxating Elevators

It is tooth extraction or root extraction for the use of the screwdriver, reusable.

Bone Files

Manual accessory instruments in dentistryhaving a finely ridged cut surface of various shapes at the distal working end. Made of stainless steel material. Reusable.

Cleft Palate Instrument

It is mainly used to separate the mucosal membrane of jaw, nasal mucosa or vascular nerve bundle during cleft palate operation.

Plaster Spatulas

Mainly usd for dental lab.

Articulating Paper Forceps

It is used for holding articulating paper when examining occlusal state of upper and lower teeth in stomatology department.

Forceps (for Adults)

It is made of stainless steel and is composed of a gripper beak, joint and gripper handle. Reusable.

Laboratory Pliers

Mainly used in the dental lab.

Orthodontic Pliers

Composed of a gripper beak, joint and handle, the gripper mouth can be made of different shapes according to its use and is made of stainless steel. Reusable.

Arch Turret

It is mainly composed of handle, forming wheel, shaft and pressure bar. The product is made of 0Cr18Ni9 material which conforms to GB/T1220-2007.

Band Pusher

Comprised of a gripper beak, joint and handle, the gripper mouth can be made of different shapes depending on its use and is usually made of stainless steel. Reusable.

Scalpel Handle

It has a slot head for mounting the surgical blade. Made of stainless steel material. Reusable.Product usageSurgical blades are installed and used to cut human soft tissue.

Metal Crown Scissors

Scissors made of stainless steel with ring handles. Non-sterile.

Surgical Scissors

It is composed of a pair of middle connected blades, with a cutting edge at the head and a finger ring at the tail. Reusable.Product UsageUsed for cutting human tissue and skin.

Ophthalmic Scissors

It is composed of a pair of middle connected blades, the head is a blade, and the tail is a spring blade. It can be used repeatedly.Product usageIt is used to shear intraocular tissue.

Haemostatic Forceps

It is composed of a clamp beak, joint and clamp handle, the head has lip head teeth, the tail is the finger ring, the middle is connected and fixed with rivets after piercing the gills.

Needle Holder

It is composed of a clamp beak, joint and clamp handle, the head has reticulation teeth, the tail has a finger ring, and the middle is connected and fixed with rivets after piercing the gills.

Retractors

It is composed of a handle and a pull hook, which can be divided into single head and double head. Reusable.

Dental Stainless Steel Wire

It is used for temporary binding and positioning of brackets and steel wires in orthodontics.MaterialThe product is made of 06Cr19Ni10 material specified in GB/T4240.

Sterilization Tray

It is used for disinfection of conventional instruments.

Advantage of UMG Dental Instrument

Manufactured from High Quality Medical Grade.

Stainless Steel- High Degree of Flexibility with Conducting the Procedures

full Autoclavable / Reusable, manufactured for Optimum Performance and Longevity

high Degree of Aesthetic and Corrosion Resistance.

Why Choose UMG Dental Instrument

We have strong technical force, mature and advanced production technology and first-class management level to ensure the high quality of products.

Dental Instrument Repair

Before, during and after the use of the product, attention should be paid to protecting the product from collision damage.

The product must be cleaned, disinfected and dried immediately after use.

The collision of the head of the instrument should be avoided in the process of disinfection and preservation.

what Is The Dental Instrument Cleaning Solution?

You can make use of a ready-to-use detergent disinfectant, which is specially designed to clean and disinfect basic dental instruments and provides a clean and safe operating environment for patients. The detergent disinfectant can effectively remove blood, saliva and has excellent disinfecting properties. Also, you can use an ultrasonic cleaner filled with disinfecting solution to clean dental clinic instruments. Then the dental clinic instruments should be rinsed and put into an autoclave using high heat, steam, and pressure to sterilize them.

sterilization of Dental Instruments

Sterilization is usually defined as the destruction of all forms of life consisting of sporing forms of microorganisms, while disinfection serves as a way to destroy pathogenic non-sporing microorganisms. All heat-stable instruments used in dentistry should be sterilized after the use of each patient by steam under pressure (autoclaving), dry heat, or chemical vapor. And remember to clean the dental burtools and equipment before sterilization or high-level disinfection in order that any debris can be removed.

We have dental cleaning tools for sale, if you want to buy our products, please contact us.

If you need dental equipment dealers, please contact us.



在线联系供应商

至: Tangshan UMG Medical Instrument Co.,Ltd.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Dental Handpiece
Dental Handpiece What Is a Dental Handpiece Dental handpiece bursis a tool commonly used in dental treatment for oral patients. Dental handpiece cleaning machineca...
Cement Spatulas
Cement Spatulas It is used for mixing cement powder and denture powder when filling teeth in dental department. Product Information Name: spatulas Model: E1 E2 ...
Disposable Prophy Rings
Disposable Prophy Rings Convenient for mixing medicine, glue and so on; Perfect designed for dental lab work; Cold sterilization. Feature of Disposable Prophy Paste Rin...
Mouth Mirrors Handle
Mouth Mirrors Handle Mouth Mirror Handle After the product is connected with the mouth lens, it can be used by the stomatologist for the oral examination of the pati...
Rotary Super Gold Files
Rotary Super Gold Files Dental Rotary Files Application Dental Area Function Endo Treatment Product detail Made of high quality niti alloy,after heat activ...
供应产品

Same products

Toy flammability tester
Toy flammability tester 卖方: 千实精密机电仪器检测设备有限公司 TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi ...
PCB circuit board manufacturer for computer component PCB assembly service
PCB circuit board manufacturer for computer component PCB assembly service 卖方: Shenzhen STHL Electronics Co.,Ltd. SERVICES:electronic material procurement, PCB production, PCBA assembly, cable assembly, finished...
Full Automatic PCB Assembly for Industrial Automation Custom PCB Manufacture PCBA Service
Full Automatic PCB Assembly for Industrial Automation Custom PCB Manufacture PCBA Service 卖方: Shenzhen STHL Electronics Co.,Ltd. SERVICES:electronic material procurement, PCB production, PCBA assembly, cable assembly, finished...
PCBA Assembly Factory Android Motherboard Products PCBA Printed Circuit Board PCB SMT Service
PCBA Assembly Factory Android Motherboard Products PCBA Printed Circuit Board PCB SMT Service 卖方: Shenzhen STHL Electronics Co.,Ltd. SERVICES:electronic material procurement, PCB production, PCBA assembly, cable assembly, finished...
PCBA customize air conditioner inverter universal single side PCB control board PCB assembly
PCBA customize air conditioner inverter universal single side PCB control board PCB assembly 卖方: Shenzhen STHL Electronics Co.,Ltd. SERVICES:electronic material procurement, PCB production, PCBA assembly, cable assembly, finished...