KE300A Series Open Loop Vector Control Inverter

KE300A Series High Performance Open Loop Vector Control Inverter widely used for the asynchronousmotor driving where better speed control and low-frequency torque are required . KE300A is built on TI's powerful DSP-based motor control chip, with the adoption of the sensorless current vector control (SVC) and open-loop torque control(TC). KE300A enhances its reliability to meet the requirements of environment adaptability, customized and industrialized design with more optimized functions, more flexible applications and more stable performance.

Features of KE300A Series Open Loop Vector Control inverter

Excellent design and superb manufacturing process

Powerful hardware speed tracking

With powerful hardware speed tracking, easily responding to the applications with large inertia requiring quick start.

Accurate parameter identification

With an optimized motor parameter autotuning model, providing more precise identification.

Enhanced oscillation suppression

Fast current limiting

With fast current limiting function, easily responding to the conditions with sudden load, greatly reducing the probability of inverter's frequent overcurrent fault.

Dual PID switching

With dual PID switching function, adapting to varied complicated conditions with flexibility

Original energy-saving mode

With an original energy-saving mode, when at a light load, reducing the output voltage automatically, making more efficient energy saving.

Optimized V/F separation

Flux-weakening control

frequency could be up to 3000Hz, easy for the applications requiring high speed.

Powerful PC monitoring software, offer RS485 communication interface, support MODBUS-RTU communication protocol.

Applications of KE300A Series Open Loop Vector Control inverter：

Motor, Mine, Machine Tools, Textile, Oil, Other Machineries

Technical Specifications ofKE300A Series Open Loop Vector Control inverter

Item	Technical Index	Specification
Input	Input voltage	1AC/3AC 220V±15%, 3AC 380V±15%, 3AC 660V±15%
	Input frequency	47~63Hz
Output	Output voltage	O~rated input voltage
	Output frequency	V/f control: 0~3000Hn
		Sensorless vector control: 0~300Hn
Control Features	Control mode	V/f control
		Sensorless vector control
		Torque control
	Operation command mode	Keypad control
		Terminal control
		Serial communication control
	Frequency setting mode	Digital setting, analog setting, pulse frequency setting, serial communication setting, multi-step speed setting & simple PLC, RID setting, etc. These frequency settings can be combined & switched in various modes.
	Overload capacity	G model: 150% 60s, 180% 10s, 200% 3sP model: 120% 60s, 150% 10s, 180% 3s
	Starting torque
	Speed adjustment range	1:100 (SVC); 1:50(V/f)
	Speed control precision	±0.5% (SVC)
	Carrier frequency
	Frequency accuracy	Digital setting: 0.01 HzAnalog setting: maximum frequency * 0.05%
	Torque boost	Automatically torque boost; manually torque boost: 0.1 30.0%
	V/f CURVE	Three types: linear, multiple points and square type (1.2 power, 1.4 power, 1.6 power, 1.8 power, square)
	Acceleration/deceleration mode	Straight line/S curve; four kinds of acceleration/deceleration time, range: 0.1s 〜3600.0s
	DC braking	DC braking when starting and stoppingDC braking frequency: 0.0Hz—maximum frequency, braking time: 0.0s—100.0s
	Jog operation	Jog operation frequency: O.OHz—maximum frequencyJog acceleration/deceleration time: 0.1 s—3600.0s
	Simple PLC & multi-step speed operation	It can realize a maximum of 16 segments speed running via the built-in PLC or control terminal.
	Built-in RID	Built-in PID control to easily realize the close loop control of the process parameters (such as pressure, temperature, flow, etc.)
	Automatic voltage regulation	Keep output voltage constant automatically when input voltage fluctuating

Selection Table of KE300A Series Open Loop Vector Control inverter

Solution of MICNO KE600 on Belt Conveyor2019-11-19

Solution of MICNO KE300 on CNC Machine2019-11-19

Solution of MICNO KE300A on Air Compressor2019-11-08

Solution of MICNO KE300 on Veneer Peeling2019-11-08

Solution of MICNO KE300 on Oil Driller2019-11-08

Shenzhen MICNO Electric Co., Ltd.provides open loop vector control vfd, sensorless vector vfd, single phase 220v ac motor speed control, etc. Contact us to know more.

Other supplier products

	Solar Energy	Based on the demand for distributed PV grid-tied power generation system and understanding of future development, MICNO solar technology relies on ...
	Solar System Parts	MICNO is a solar system parts supplierthat offers customers all parts of the solar system, one-stop service, safer and more reliable. A basic sola...
	HE1000 Series Vector High Voltage Inverter	HE1000 series vector high-voltage inverter is the second-generation high-voltage frequency conversion speed regulation device independently develop...
	Solar Pump Controller	pump controller for solar water system solar pump controller manufacturer solar pump system controller/ solar well pump controller Solar Pump ...
	Hybrid Inverter (Low battery voltage)	We are a hybrid inverter supplierwith a wide variety of hybrid inverter options are available to you. View the selection table of the hybrid invert...

供应产品

Same products

	Floral Garden Tools Set	卖方: Dongyang Guorui Industry And Trade Co., Ltd.	Investing in a floral garden tools set not only enhances your gardening experience but also add...
	Rice Husk Pellet Machine	卖方: Jiangsu Kingwood Industrial Co., Ltd.	● JWZL-420 is the most popular biomass/woodpellet machine of all the pellet mills offered by Ch...
	希腊-小型气相液氮储存罐-液氮容器	卖方: 河南天之道生物科技有限公司	在科技不断进步的今天，随着现代科研和医疗领域对生物样本的低温保存要求越来越高，小型气相液氮罐的出现，成为这一领域的理想选择。下面KGSQ厂家为您具体介绍一下它的优势特点。 1.气相/液相储存 小...
	Common Rail FuCommon Rail Fuel Injector Nozzle L500PBCel Injector Nozzle L500PBC	卖方: 738347	Common Rail Fuel Injector Nozzle L500PBC 0 445 110 189 Injector Valve Set 0 445 110 190 Injector...
	Common Rail FueCommon Rail Fuel Injector Nozzle F00VX40014l Injector Nozzle F00VX40014	卖方: 738347	Common Rail Fuel Injector Nozzle F00VX40014 Common Rail Fuel Injector Nozzle F340 Common Rail ...