BS 6387
Residents, owners and regulatory authorities of buildings are now, more than ever, protected by stringent safety requirements. Electrical installations – particularly fire alarm systems, sprinklers, smoke detection and extraction equipment, emergency lighting and evacuation systems – all merge to prevent harm to people and damage to buildings and equipment.
The wiring behind the systems proves to be an important factor in preventing fires from spreading, and stopping smoke from choking off exit points and allowing a safe rescue.
If the wiring is adversely affected, the systems themselves will have no power to provide their own critical functions.
Stringent tests – including IEC 60331 and BS 6387– are performed to ensure that such cables are fire-resistant.
Resistance to fire alone
Category A - Cables are under fire at 650°C for 3 hours
Category B - Cables are under fire at 750°C for 3 hours
Category C - Cables are under fire at 950°C for 3 hours
Category S - Cables are under fire at 950°C for 20 min (short duration)
Resistance to fire with water
Category W - Cables are under fire at 650°C for 15 minutes, then at 650°C with water spray for a further 15 minutes.
Resistance to fire with mechanical shock
Category X - Cables are under fire at 650°C with mechanical shock for 15 minutes.
Category Y - Cables are under fire at 750°C with mechanical shock for 15 minutes.
Category Z - Cables are under fire at 950°C with mechanical shock for 15 minutes.
During the test, the cable is mounted on a panel and is shocked with a steel bar at 30-second intervals for 15 minutes while exposed to flame and no fuse shall be ruptured nor any lamp extinguished.
JENUIN cable is a china cable supplier, we provide china electric cable, bs 6387 cable, xlpe power cableand etc. Want to know bs6387 standardor more, contact us.
在线联系供应商
Other supplier products
| BS EN 50525-2-31 | BS EN 50525-2-31 refers the electric cables — Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 2-31: ... | |
| CU/PVC H07V-U | CU/PVC H07V U cablefeatures a plain annealed solid conductor class 1 with PVC insulation. cable h07v uis also known as building wire or electric ... | |
| CU/PVC/PVC H03VV-F H03VVH2-F Flat Flexible PVC Cable | 318-Y CU/PVC/PVC H03VV-F H03VVH2-F cable refers to the circular flexible PVC cablewith a voltage rate of 300/300V. It is called or named according ... | |
| Al & Cu Aerial Insulated Cable | Aerial copper cables are the cables of single-layer or multi-layer aluminum or copper strands twisted on top to extrude the insulation wire. Overh... | |
| BS 7889 | JENUINcable is a Chinacable manufacturerwith more than 20 years of experience in designing, manufacturing, and selling green environmental–pr... |
Same products
| High quality beeswax used in craft production | 卖方: Syntop chemical Co.,Ltd. | Beeswax has a wide range of uses in handicrafts, appearing in everything from traditional candles... | |
| FT wax used for EVA-based hot melt adhesive | 卖方: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... | |
| high melting point FT wax improve the heat resistance of adhesives | 卖方: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... | |
| For hot melt adhesive high melting point FT WAX | 卖方: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... | |
| Diesel Injection Delivery Valve 1W6982 | 卖方: China lutong | Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection... |













