Automotive Mold
Hanking mouldingserves global Automotive & Vehicle products customers, more than 10 years of experience enabling the HanKing team to provide customers the fast development time and stable quality to ensure the new project running well. HanKing engineer will analysis the filling to obtain the best gate position the best flowing regime, and design the best cooling channel to ensure the minimum wrapping deformation and we have a very good injection operator to help set the best injection parameter to avoid any development time waste and improving the molding parameter reliability.
HanKing Mould is very experienced in small and medium-sized precision automotive molds, in the past years, the types of products we involved were included fuse and fuse box, connector, switch, relay, sensors, actuators, terminal, valve, handle and other body accessories. We are one of the leading automotive mold manufacturersin China.
Why are Automotive Moulds Important?
In the development of the automotive industry, the proportion of plastic parts in automotive parts is very large, and the demand for plastic parts is increasing day by day because plastics have the advantages of beautiful appearance, lightweight and easy processing. Most plastics have a specific gravity of 0.9 to 1.6, and the proportion of glass fiber reinforced composites will not exceed 2.0, while A3 steel is 7.6, brass is 8.4, and aluminum is 2.7. The use of plastic can reduce the weight of parts by about 40%, and the cost can be greatly reduced, which makes plastic the preferred material for automotive light-weighting. Plastic is easy to molding parts with complex shapes. According to the plastic composition of the plastic, by adding different fillers, plasticizers and hardeners to produce the desired properties of the plastic, changing the mechanical strength and processing properties of the material to meet the requirements of different parts of the car. The plastic consumption of each auto part accounts for 20% of the total vehicle materials and may reach 35% in the future. When the auto company develops a new car, it needs to use hundreds of sets of automotive plastic injection molds, which requires the quality assurance of plastic parts in production, and the quality of plastic parts is determined by the mold.
Which Parts of the Car Are Commonly Used in Plastic?
Bumper, the instrument panel accessories, inlet grille, fender, radiator grille, trim panel, engine parts, Water tank accessories, air conditioning accessories, air filter accessories, various kettles, seat accessories, floor panel accessories, roof panel accessories, bar accessories, steering wheel accessories, door trims, rearview mirrors and various fastener, front and rear lamp, etc.
As one of chinese mold manufacturers, we have types of related products for sale, anything you need, please contact us.
在线联系供应商
Other supplier products
 |
Family Mould | Family Mold Injection Molding 491138 Mould Name: 1+1 Family Mould Part Material: PA6 GF30 Product Size: 78*35.6mm Product Description: Scharnier... |
 |
Multi Cavity Mould | A multi cavity moldcan be understood, obviously referring to mold with multiple cavities. The multi8 cavity moldcomprises a multi-cavity of the sam... |
 |
Consumer Parts Plastic Mold | Description of Consumer PartsPlastic Mold: Plastic Valve 3 Plate Mould Tolerance: +-0.01mm Surface: SPI A2 & VDI 3400 Part material: PPO foo... |
 |
Custom Injection Mold Making Services for Auto Parts | Mould Type: Automotive Final Sensor Production Material: 33% glass fiber reinforced, black PA 6/12 No of Cavities: 4 cavities Core Material: S7... |
 |
3 Plate Mould 49113-21 | Mould Name: 3 plate mould Part Material: PBT GF15 Product Size: ф34.9x82.29 Product Description: Mischschraube kpl Mould Cavity: 2 Caviti... |
Same products
 |
PH-221数字PH值和温度控制器 | 卖方: 科立龙电子股份有限公司 | 产品说明:带背光显示的大屏幕,具有数字化功能为方便而精确的校正而进行的校正结果更好。同时监测酸碱值和温度。 （背光显示器） 测量范围 酸碱 ... |
 |
TH021W物联网温湿度控制器 | 卖方: 科立龙电子股份有限公司 | 产品说明:该电子温度控制器可用于各种温度湿度控制场合,如储存、宠物、繁殖、栽培等。,例如加热或冷却温室和冬季花园,水族馆的水温监测,繁殖土壤的温度控制。操作方便,可与任何电加热垫或其他加热或冷却... |
 |
RS485工业在线PH控制器 | 卖方: 科立龙电子股份有限公司 | 技术规格: 范围 酸碱 0.00 ~ 14.00 pH 温度 0～100℃ 决心 ... |
 |
PH-221数字PH值和温度控制器 | 卖方: 科立龙电子股份有限公司 | 产品说明:带背光显示的大屏幕,具有数字化功能为方便而精确的校正而进行的校正结果更好。同时监测酸碱值和温度。规格: 测量范围 酸碱 临时的 ... |
 |
工业在线ORP控制器 | 卖方: 科立龙电子股份有限公司 | 产品说明： 凯利龙水的ORP控制器被包装成1/4 带有双SPDTHI/LO的面板挂载控制器盒 继电器、手动设置点和校准电位计 设置在ORP控制面板的前部。ORP 控制器具有一个孤立的4-20M... |
