Adapter Charger Housing Mold 496-1
Mould Name: Adapter Charger Housing Mould
Part Material: PC
Product Size: 58.3*57.9*8.6mm
Product Description: Adapter Charger Housing UK
Mould Cavity: 4 Cavities
Mould Size: 400*450*343MM
Suitable Injection Machine: 160 ton
Mould Cavity Steel: ASSAB8407
Mould Injection System: Cold runner w/ tunnel gate
Mould Ejection System: Ejector Pin
Mould Cycle Time: 26's
Mould Life Cycle: 500,000
Lead Time: 60 days
Mould Features: 8 Sliders
Adapter mold is also AC charger mold, HanKing has made a lot of such moulds. For the adapter mold or AC charger mould, the appearance is important as well as the part dimension.
What issues should be noted in the tooling design?
First, we should choose the parting line of the part, parting line in cavity side, and parting line in the core side and it's very important to get customers' approval for the parting line.
The mold designer must choose the appropriate gate position and diameter of the gate according to the structure of the product and the requirements of the clients. For this charger mould, we normally suggest using point gate.
How to release the plastic adapter from the mould also requires careful consideration by the designer. Designers must carefully study the structure of the product, using sliders, lifters and ejection mechanisms to help the product smoothly get out of the mold cavity.
Manufacturing tips: shut-off angle along the slider moving direction as well as polishing the steel along the direction of product removal.
When some areas make the mould ejection out difficulty, find out the solution and send a proposal to the customer.
Try to make insert in the complicate area and to confirm the split line of insert pin with customers.
Reasonable use of ejector pin, ejector sleeve, ejector blade, etc. mechanisms, the distribution of the ejector pin should be even and balance.
The texture and polish are different in the cavity and core of the mould.
Most of the time, the plastic part drawing from the customer is not designed with a draft angle, we should propose to increase the draft angle within the allowable range.
It should be recessed on the bottom surface to avoid sink mark because of the wall thickness of the pillars.
The designer should check if any ribs or holes are not able to put ejector pin.
Sharp steel is must be avoided.
Hanking mouldhas excellent experience in Adapter Charger Mould, we made Adapter Mould for different country standard, good water cooling to get the beautiful part surface, and automatic ejection.
If you want to know more about ac mould engineering limited, please visit our website.
As one of china injection molding suppliers, we will do our best to meet all customers’needs.
在线联系供应商
Other supplier products
 |
Plastic Insert Mold 139-86 | Mould Name: Plastic Insert Mold Part Material: PA + Glassfiber Product Size: 11*30*1.3 Product Description: Stator Mould Cavity: 4 Cavities Mo... |
 |
5. Multi Cavity Mould | 24 Cavities Plastic Injection Mold Product Name: 24 Cavities Plastic Injection MoldMold Base: LKM, HASCO, DME, etc.Mold Steel: NAK80, ASSAB8407, S1... |
 |
Prototype Mould | Soft Prototype Mold Prototype moldis a kind of test mould before mass production mould, customer make test mould for design verification, Product ... |
 |
Home Appliance Mould | Home Appliance Mould Embroidery Machine Frame Mould 4937-2 Plastic frame for a multi-needle embroidery machine. Mould Name: Embroidery Machine Fra... |
 |
Automotive Mold | Hanking mouldingserves global Automotive & Vehicle products customers, more than 10 years of experience enabling the HanKing team to provide cu... |
Same products
 |
Fischer Tropsch wax used for road marking paint | 卖方: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is widely used in road marking paints and serves as a key performance additiv... |
 |
Cable Wire Recycling Production Line | 卖方: Changzhou Optima Technology Co.,Ltd. | Cable Wire Recycling Production Line 1000kg Copper Wire Recycling Machines: The biggest ca... |
 |
Small Cable Granulator and Separator | 卖方: Changzhou Optima Technology Co.,Ltd. | Small Cable Granulator and Separator : Small shape,1 phase power,grind and separate copper f... |
 |
Turnkey service of tire recycling | 卖方: Changzhou Optima Technology Co.,Ltd. | Turnkey service of tire recycling At , we specialize in manufacturing advanced tire recyclin... |
 |
Mobile Portable Tire Shredder | 卖方: Changzhou Optima Technology Co.,Ltd. | Mobile Portable Tire Shredder Mobile Portable Tire Shredder – A cost-effective soluti... |
