10G SFP+ AOC

T&S Communication TSPA-85192-xxxC is a Pluggable SFP for 10 Gigabit Ethernet, compliant with the SFF-8431. This transceiver is a high-performance module for short-range data communication and interconnect applications. The length up to 150 m using OM2 MMF or 300 m using OM3 MMF.

Features of China10G SFP+ AOC

Electrical interface compliant to SFF-8431

850nm VCSEL laser and PIN photo-detector

Maximum link length of 150m on OM2 MMF and 300m on OM3 MMF

Hot Pluggable

Built-in digital diagnostic functions

Operating case temperature 0°C to 70°C

RoHS compliant

Applications of 10G SFP + AOC

10G Ethernet, Data Centers

Infiniband transmission

Specifications of 10g Sfp+ Aoc

Absolute Maximum Ratings

Parameter	Symbol	Min	Max	Unit
Storage Temperature	TS	-20	85	°C
Relative Humidity	RH	0	85	%
Case Operating Temperature	TCase	0	70	°C
Supply Voltage	VCC	-0.5		V

Recommended Operating Conditions

Parameter	Symbol	Min	Typical	Max	Unit
Case Operating Temperature	TCase	0	-	70	°C
Supply Voltage	VCC				V
Supply Current	Icc	0	-	150	mA
Data Rate	DR	-		-	Gbit/s

Transmitter Specification

Parameter	Symbol	Min	Typical	Max	Unit
Input differential impedance	Zin	90	100	110	Ohm
Differential Data Input Swing	Vin	200	-	1600	mVp-p
Transmit Enable Voltage	VEN	-	-		V
Transmit Disable Voltage	VD		-	-	V
Average launch power	PAVG	-6.5	-1	-	dBm
Extinction Ratio	ER		-	-	dB

Receiver Specification

Parameter	Symbol	Min	Typical	Max	Unit
Differential Data Output Swing	Vout	370	-	1600	mVp-p
Bit Error Rate	BER	-	-	10-12	-
Receiver Overload	Pinmax		-	-	dBm
Output Differential Impedance	Zout	90	100	110	Ohm
LOS Fault	VOH		-	-	V
LOS Normal	VOL	-	-		V

As one of the mostprofessional fiber optic transceiver manufacturers, we provide optical communications products, qsfp28 patch cord, china 40g qsfp to 10g sfp dac, 10g aoc cable, aoc chinaand etc. Want to know more? Please contact us.

Other supplier products

	GRADE B PATCH CORD	T&S grade B patchcord is the patchcord with the random mating performance of Grade B as IEC-61753-1 defined, more than 97% of maximum 0.25dB ra...
	The Difference Between 100G QSFP28 Fiber Optical Transceiver and 100G CFP4 Fiber Optical Transceiver	The100g optical transceiveris an optoelectronic device that performs electro-optical and photoelectric conversion. The fiber optical transceiver is...
	40g aoc	T&SCommunication TSQS-8540G-xxxC is a four-channel, pluggable, and parallel fiber-optic QSFP+SR4 for 40-gigabit ethernet and it is compliant wi...
	IP LC/SC FIBER CABLE	The IP connector together with supported cable is applied to 4G,5G, Base Station remote radios, and fiber to the antenna transmission. Besides of t...
	PLC SPLITTER	Planar Lightwave circuit (PLC) splitter is a sort of optical power management device produced using silica optical waveguide technology and offers ...

供应产品

Same products

	FT wax used for EVA-based hot melt adhesive	卖方: Syntop chemical Co.,Ltd.	Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for...
	high melting point FT wax improve the heat resistance of adhesives	卖方: Syntop chemical Co.,Ltd.	FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische...
	For hot melt adhesive high melting point FT WAX	卖方: Syntop chemical Co.,Ltd.	The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ...
	Diesel Injection Delivery Valve 1W6982	卖方: China lutong	Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection...
	High melting point FT wax used as plastic processing additives	卖方: Syntop chemical Co.,Ltd.	Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm...