Gate Valve
The resilient seated water isolation big size gate valve / cast iron gate valve china of ZECO from China is widely used and reliable in the water supply and drainage system of water supply company, sewage company, and various industries in big cities of China. Established in 1991, at that time we are the only wedge gate valve manufacturers / wedge gate valve suppliers / water gate valve manufacturers / china gate valve suppliers in China, and it is the Chinese market to introduce and the earliest development and production of cast iron gate valve manufacturers, and already known in the field of water gate valve production for more than decades, although the market of other China gate valves are very common and the price is low, but the durability and reliability, we believe that our
deep research and development and rich production experience are the foundations why we are trusted gate valve factoryof our customers.
How Does a Gate Valve Work?
A gate valve is the most common valve in chinesefor water supply systems. It represents a linear-motion isolation valve and has a function to stop or allow the flow. Gate valves got their name from the closure element sliding into the flow stream to provide shutoff and, therefore, acting like a gate. Gate valves are used to isolate specific areas of the water supply network during maintenance, repair works, new installations, as well as to reroute water flow throughout the pipeline.
Gate valves are normally operated by a handwheel, a valve T-key (wrench), or an actuator. The wheel is attached to a valve stem and transfers rotational energy to it. During the gate valve opening, the rotation of the handwheel turns the threads of the gate stem into the gate and vice versa for closing. This energy moves the gate valve wedge downwards or upwards. In underground gate valve installations, an extension spindle is attached, which allows operation without direct access to the valve itself.
Generally, gate valves are installed in the areas of a pipeline where they will longer remain open or closed, as they generally require some time to switch between these two positions. However, when the valve needs to be operated quite often or even remotely, motorized gate valves are used (i.e. equipped with an electric actuator).
How to Choose the Right Gate Valve?
Choosing a sturdy and durable gate valve can reduce the cost of expensive replacement in the future. Here are some selection criteria:
Wedge design
The wedge is the sealing part of the gate valve, so it is very important.
Wedge nut: The wedge nut connects the wedge to the valve stem. There are two basic wedge nut designs; a loose wedge nut design in which the brass nut slides in a groove in the wedge core; and a fixed wedge nut design in which the nut expands in the wedge core. With the fixed wedge nut design, the number of movable parts is reduced, thus eliminating the risk of corrosion due to the damage of the rubber surface of the wedge core by the moving parts. Therefore, it is recommended to use a fixed wedge nut design.
Wedge guide plate and sliding shoe: When opening and closing the valve during pipeline operation, the wedge plate bears friction and pressure. The guide device on the wedge joint cooperates with the corresponding groove in the main body to help stabilize the wedge position during operation and ensure that the valve stem will not bend downstream due to the flow rate. The wedge-shaped track shoes help ensure that the rubber on the wedge-shaped surface does not wear out due to friction between the wedge and the internal rails. Make sure to fix the wedge on the wedge and make sure that the rubber layer under it is sufficient to prevent the wedge core from corroding.
Rubber: The wedge must be fully vulcanized with rubber, and the amount of rubber in the sealing area of the wedge is sufficient to absorb impurities in the valve seat, which is very important for the sealing of the valve. The strong bond between the rubber and the wedge core is important to ensure proper sealing even when the rubber is compressed and to prevent creep corrosion even if sharp objects penetrate the rubber during closing of the valve.
Rubber quality
Rubber quality is critical to durability and valve function. Rubber must be able to withstand the continuous impact of impurities and chemicals without being damaged, and must be able to absorb small impurities in the valve seat to make it tightly sealed.
External corrosion protection
External corrosion protection is critical to the service life of the valve. It is recommended to use in accordance with DIN 3476 Part 1, EN 14901 and GSK
Tight structure
There are two important design issues:
Stem seal: The seal on the bonnet around the stem can maintain the pressure inside the valve/pipe. Stem seals should always be designed to be maintenance-free and should provide the service life of the valve or at least meet the service life requirements of EN 1074-2. The main seal that maintains the internal pressure is best designed as a hydraulic seal, so as to achieve a tighter seal while increasing the internal pressure. The spare seal should be placed around the valve stem. In order to protect the seal from external contamination, a seal should be placed around the top stem. For safety and health reasons, high-quality EPDM rubber compounds approved for drinking water must be used in places in direct contact with drinking water.
Bonnet/body seal: The tightness between the bonnet and the valve body can be achieved by using a gasket embedded in the valve recess. This design ensures that the gasket remains in the correct position and will not be blown out due to pressure fluctuations. In order to protect the bonnet bolts from corrosion, the bonnet gasket should surround the bolts, and the bolts should be embedded in the valve in such a way that no threads are exposed.
General performance
When operating the gate valve through the handwheel or electric actuator, be sure to pay attention to the operating and closing torque.
Full bore: In order to be able to use pipeline cleaning equipment, the inner diameter of the valve should be consistent with the nominal size of the valve.
Water Control Solutions
ZECO has professional solutions to optimize water usage, reuduce costs and maximize energy efficiently.
Waterworks
ZECO Waterworks valves used in water supply are suitable for prolonged underground and outdoor use in demanding conditions and are maintenance-free.
If you want to know more about gate valve types and sizes, please visit our website.
在线联系供应商
Other supplier products
 |
Pressure Relief(Sustaining) Valve | Basic informationThis sustaining valveis opened to prevent the pipeline and equipment from being damaged due to overpressure when the pressure in t... |
 |
3 Inch Gate Valve | Description of 3 Inch Gate Valve: ZECO 3 inch gate valve is mainly used for fully open or fully closed switching valves. They are usually not used ... |
 |
3 Inch Butterfly Valve | Description of 3 Inch flanged Butterfly Valve: ZECO 3 butterfly valveis a small diameter butterfly valve, usually manually operated, and the connec... |
 |
Adjustable Dynamic Flow Balancing Valve | Basic information Adjustable dynamic flow balancingvalve can manually adjust the set flow rate in the pipeline, and also can automatically maintain... |
 |
WCB Valve – WCB Gate Valve | Description As one ofgate valve manufacturers china, ZECO Valve Group is certified to API 600 and API 6D and we offer competitive quotations as we... |
Same products
 |
Perma PRO 250 106649 Lubricant Cartridge H1 SF10 Lubricant Cartridge | 卖方: 广东聚广恒自动化设备有限公司 | |
 |
蔓越橘提取物 | 卖方: 永州菁木生物科技有限公司 | 蔓越莓主要生长在北美，含有独特的原花青素，可以防止细菌（尤其是大肠杆菌）粘附在身体细胞上，从而降低感染风险。它们还可以改善动脉粥样硬化，增强心血管健康。蔓越莓富含维生素 C、铁、抗氧化剂和原花青... |
 |
水飞蓟提取物 | 卖方: 永州菁木生物科技有限公司 | 奶蓟草，也称为水飞草或水飞蓟，是一种菊科植物，其药用历史已有 2000 多年。它的名字来源于其压碎的叶子的乳白色汁液。其提取物富含水飞蓟素、水飞蓟宾、黄酮类化合物和其他抗氧化剂，可对抗自由基、增... |
 |
槐米提取物 | 卖方: 永州菁木生物科技有限公司 | 槐米提取物源自中国、日本、韩国和越南盛行的槐树花，富含芦丁和槲皮素等黄酮类化合物。这些黄酮类化合物具有有效的抗氧化、抗炎和血管保护特性。因此，该提取物广泛用于传统医学和保健品中，以增强心血管健康... |
 |
人参提取物 | 卖方: 永州菁木生物科技有限公司 | 人参提取物是从五加科植物人参的根、茎、叶中精心提取和精制而成。该提取物富含18种人参单体皂苷，可溶于80°C的水，易溶于乙醇。人参的使用已有数百年历史，人参皂苷是其研究最广泛的活性成分之... |
