SFP 1.25G Tx1310/Rx1550 3Km LC Transceiver

Gearlink’s SFP-GE-BX SFP transceiver is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1310nm FP laser (the 1550nm FP laser), and the PIN/TIA. The module data link up to 3km in 9/125um Single-mode fiber.

This sfp+ biditransceiver meets the Small Form Pluggable (SFP) industry-standard package utilizing an integral LC-Bi-directional optical interface connector. An enhanced Digital Diagnostic Monitoring Interface compliant with SFF-8472 has been incorporated into the transceiver. It allows real-time access to the transceiver operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power, and transceiver supply voltage by reading a built-in memory with an I²C interface.

The optical output can be disabled by an LVTTL logic high-level input of Tx Disable, and the system also can disable the module via I²C. Tx Fault is provided to indicate the degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of the receiver or the link status with the partner. The system can also get the LOS (or Link)/Disable/Fault information via I²C register access.

Get Free Quote

Compatibility of SFP 155M Tx1550/Rx1310 40Km LC Transceiver

Cisco

GLC-BX-U1000BASE-BX3-U SFP BIDI 1310nm-TX/1550nm-RX 3km

Technical Specification Of SFP 1.25G Tx1310/Rx1550 3Km LC Transceiver

General Specifications

Parameter	Symbol	Min		Max	Unit
Bit Rate	BR				Gb/s etc
	Max			3	km

Absolute Maximum Ratings

Parameter	Symbol	Min		Max	Unit
Storage Temperature	TS	-40		85	ºC
Storage Ambient Humidity	HA	5		95	%
Power Supply Voltage	VCC	-0.5		4	V
Signal Input Voltage		-0.3		Vcc+0.3	V
Receiver Damage Threshold		+3			dBm
Lead Soldering Temperature/Time	Told			260/10	ºC/sec	Note 1
Lead Soldering Temperature/Time	Told			360/10	ºC/sec	Note 2

As one of optical transceiver suppliers, we have types of related products for sale, if you have needs, please contact us.

Other supplier products

	SFP 155M 1310nm 40Km LC Transceiver	GearLink’s 100M SFP optical transceiver GAS5L0C31 is a small pluggable transceiver module based on the SFP multi-source agreement (MSA). It w...
	SFP28 25G 1310nm 40km DDM LC Transceiver	GJS5L0C31 Lite is a 25Gb/s transceiver module designed for optical communication compliant to Ethernet 25 ER Lite standard. Its high-performance co...
	aoc ethernet cable	AOC refers to Active Optical Fiber which requires optical transceiver devices to convert electrical signals into optical signals, or convert optica...
	QSFP-DD 400G SR8 100m MPO-16 Transceiver	400GQSFPDD SR8Optical Transceiver Module (400G QSFP-DD SR8) with Quad Small Form-Factor Pluggable Double Density (QSFP-DD) form-factor is of high p...
	SFP 10G 850nm XXm AOC	The GearLink's SFP+ Active Optical Cables are direct-attach fiber assemblies with SFP+ connectors. SFP AOChave very good power consumption performa...

供应产品

Same products

	Cable Wire Recycling Production Line	卖方: Changzhou Optima Technology Co.,Ltd.	Cable Wire Recycling Production Line 1000kg Copper Wire Recycling Machines: The biggest ca...
	Small Cable Granulator and Separator	卖方: Changzhou Optima Technology Co.,Ltd.	Small Cable Granulator and Separator : Small shape,1 phase power,grind and separate copper f...
	Turnkey service of tire recycling	卖方: Changzhou Optima Technology Co.,Ltd.	Turnkey service of tire recycling At , we specialize in manufacturing advanced tire recyclin...
	Mobile Portable Tire Shredder	卖方: Changzhou Optima Technology Co.,Ltd.	Mobile Portable Tire Shredder Mobile Portable Tire Shredder – A cost-effective soluti...
	Aluminum wire rod rewinding machine	卖方: Changzhou Optima Technology Co.,Ltd.	Aluminum wire rod rewinding machine Basic Introduction 's is engineered with advanced Korea...