Oil Country Tubular Goods(OCTG)

Oil country tubular goods (octg china) is a family of seamless rolled products consisting of drill pipe, casing and tubing subjected to loading conditions according to their specific application:

Drill pipe is heavy seamless tube that rotates the drill bit and circulates drilling fluid. Pipe segments 30 ft (9m) long are coupled with tool joints. Drill pipe is simultaneously subjected to high torque by drilling, axial tension by its dead weight, and internal pressure by purging of drilling fluid. Additionally, alternating bending loads due to non-vertical or deflected drilling may be superimposed on these basic loading patterns.

Casing pipe lines the borehole. It is subject to axial tension by its dead weight, internal pressure by fluid purging, and external pressure by surrounding rock formations. Casing is particularly exposed to axial tension and internal pressure by the pumped oil or gas emulsion.

Tubing is pipe through which the oil or gas is transported from the wellbore. Tubing segments are generally around 30 ft [9 m] long with a threaded connection on each end.

Corrosion resistance under sour service conditions is a very important OCTG characteristic, especially for casing and tubing.

Typical Manufacturing Processes of OCTG

Continuous mandrel-rolling process and the push bench process for sizes between 21 and 178 mm OD.

Plug mill rolling for sizes between 140 and 406 mm OD.

Cross-roll piercing and pilger rolling for sizes between 250 and 660 mm OD.

These processes typically do not allow the thermomechanical processing customary for the strip and plate products used for welded pipe. Therefore, high-strength seamless pipe must be produced by increasing the alloying content in combination with a suitable heat treatment such as quench & tempering.

Meeting the fundamental requirement of a fully martensitic microstructure even at large pipe wall thickness requires good hardenability. Cr and Mn are the main alloying elements used to produce good hardenability in conventional heat-treatable steel. However, the requirement for good sulphide stress cracking (SSC) resistance limits their use. Mn tends to segregate during continuous casting and can form large MnS inclusions that reduce hydrogen induced cracking (HIC) resistance. Higher levels of Cr can lead to formation of Cr7C3 precipitates with coarse plate-shaped morphology, which act as hydrogen collectors and crack initiators. Alloying with Molybdenum can overcome the limitations of Mn and Cr alloying. Mo is a much stronger hardener than Mn and Cr, so it can easily recover the effect of a reduced amount of these elements.

Traditionally, OCTG grades were carbon-manganese steels (up to the 55-ksi strength level) or Mo-containing grades up to 0.4% Mo. In recent years, deep well drilling and reservoirs containing contaminants that cause corrosive attack have created a strong demand for higher strength materials resistant to hydrogen embrittlement and SCC. Highly tempered martensite is the structure most resistant to SSC at higher strength levels, and 0.75% is the Mo concentration that produces the optimum combination of yield strength and to SSC resistance(1).

Have a Look on the Oil Country Tubular Goods Market

Due to the increasing emphasis on the development of deepwater and offshore reserves, high-quality OCTG products may witness a higher compound annual growth rate across the globe. In the more severe and challenging upstream operations, the requirements for high-quality OCTG products are even higher.

The liberalization of oil and gas by major countries in the world to increase foreign investment, which is boosting the development of the oil and gas industry, may bring an opportunity to the OCTG market.

North America is the main regional market for OCTG products. The extensive development of onshore and offshore oil and gas fields in the region may provide huge business opportunities for companies operating OCTG business during the forecast period.

As one of the most professional oil equipment suppliers, Saigao Groupprovides oilfield cementing tools, octg oil, octg drilling, octg for sale and etc. Saigao products are not only popular in China, but also exported to Russia, Brazil, Australia, South Africa and other countries and regions.

Other supplier products

	MUD PUMP	Mud Pump is also a popular concept of a wide range of pumps. Different regions, habits, and ultimately the pump type will not be the same. The mud ...
	Liner Wiper Plug	The Liner Wiper Plugmay be shear-pinned on the bottom of the setting tool. The conjunction with pump down plug keeps mud to be separated from cemen...
	Key Seat Wiper	Key Seat wiper Sliding sleeve type key seat reamer consists upper sub, mandrel, lower sub, sliding sleeve and so on, as shown in diagram. The slidi...
	BW160/10 Horizontal Three Cylinder Reciprocating Single Acting Piston Pump	BW series mud pump is widely used in mining, drilling, coal, railway, highway, water conservancy and hydropower, bridges, high-rise buildings, fo...
	LINER HANGER	The liner cementing is realized by the liner hanger, which reduces the casing weight of the first well in the deep well, improves the load of the r...

供应产品

Same products

	帕劳灌装液氮罐KGSQ液氮瓶	卖方: 河南天之道生物科技有限公司	在生命科学研究中，液氮是较为常用的冷冻介质，储存它的容器则成了重要实验工具。实验进行中，为了样本的低温储存环境稳定，需要定期补液以保证充足供应，因为液氮易挥发，液氮量随时间推推移而减少。因此，为...
	Micronized Polyethylene Wax for Pigment Dispersant	卖方: Syntop chemical Co.,Ltd.	Polypropylene wax is a chemical produced by pyrolysis, cut by heating and crushed by hot air It i...
	古巴液氮供应罐KGSQ低温杜瓦瓶	卖方: Henan Tianzhidao Biological Technology Co., Ltd.	在生命科学研究中，液氮是较为常用的冷冻介质，储存它的容器则成了重要实验工具。实验进行中，为了样本的低温储存环境稳定，需要定期补液以保证充足供应，因为液氮易挥发，液氮量随时间推推移而减少。因此，为...
	Specification: 0.08mm-4mm	卖方: Changzhou Yuzisenhan Electronic Co., Ltd	Changzhou Yuzisenhan Electronic Co., Ltd. has convenient transportation in Wujin District, Changz...
	多哥细胞冷冻容器KGSQ液氮野外罐	卖方: 河南天之道生物科技有限公司	液氮罐的使用，覆盖科研、畜牧、美食、美容、冷冻配件等行业，但主要还是用于生物样本保存。 保存生物样本可细分为两大类，动物精液和实验细胞。两种用法适用容器不同，各有特色。冻精保存，要配圆提桶使用...