OPS-30 Optical CNC Probe System
OPS-30 optical probe system with special cnc probe programming contains xyz probe cnc-OP510 optical infrared probe, OSI-20 receiver and standard measuring software. The OP510 CNC xyz touch probe is a compact 3D touch-trigger probe with optical signal transmission.Cnc xyz probe can be used for workpiece measuring. Optical transmission probeis widely applied. OPS-30 optical transmission probe system mainly used in various specifications of machine center, CNC milling machine, drilling machine center and so on.
OPS-30 optical probe system with special cnc probe programmingcontains xyz probe cnc-OP510 optical infrared probe, OSI-20 receiver and standard measuring software. The OP510 CNC xyz touch probe is a compact 3D touch-trigger probe with optical signal transmission.Cnc xyz probecan be used for workpiece measuring. Optical transmission probe is widely applied. OPS-30 optical transmission probe system mainly used in various specifications of machine center, CNC milling machine, drilling machine center and so on.
Parameter of OPS-30 Optical CNC Infrared Probe System
|
OP510： |
|
|
Measuring direction |
±X，±Y，+Z |
|
Arbitrary direction swinging angle |
X-Y±12°, Z +5 mm |
|
Repeatability （2σ） |
≤ 2 μm； |
|
Trigger force in Z direction |
600±30（g） |
|
Trigger force in X-Y direction |
40-80g） |
|
Optical signal receiving/sending distance |
>5m |
|
Model of the standard stylus |
M4-P50-RB6-S36 |
|
Model of the battery |
14250，3.6 (V), 2 Pcs |
|
Seal grade |
IP68 |
|
OSI-20： |
|
|
Optical signal receiving/sending distance |
>5m |
|
Input voltage |
24±10% VDC |
|
Output load current |
50mA |
|
Length of the cable |
8m |
|
Length of the cable retaining tube |
2m |
|
Seal grade |
IP68 |
Optical Probing Application of OPS-30 Optical CNC Infrared Probe System
Optical probes are suitable for small and medium-sized milling machines and machining centers with automatic tool change.
Optical probe are used to set work-piece coordinate system and machining zero points
Optical probe are used to detect and control the key dimensions, position coordinates and their precision automatically between two processes
Technology of OPS-30 Optical Transmission Probe System
Probe switch on/off method:：Range on/off、M code on/off；
Infrared coded signals are used to transmit information between the probe and the receiver;
The transmitting distance of the probe signal can be adjusted by trigger probe with special program to set the receiver;
Output four kinds of SSR signals to machine control system when probe is in the states of trigger、error、probe batteries low and output pulse;
The OSI-20 receiver can change its logical state of the output signal by setting;
Double infrared signal receiving and transmitting devices are used to increase the reliability of the equipment;
The LED lights in the receiver show the working status of the probe system.
Pioneeris a professional probe manufacturer, we provide pioneer machine and tool, usb optical probe, cnc zero probe, cnc zero probe, homemade cnc 3d touch probe, machine probeand etc. Want to know more? Please contact us.
在线联系供应商
Other supplier products
 |
Optical Tool Setter | OTC200 optical tool setteris a wireless tool setter, optical coded signals are used to transmit information between the CNC tool setter and the rec... |
 |
CNC Machine Tool Setter System | Harbin Pioneer M&E Technical Development Co, Ltd, cnc tool presetter manufacturers, was founded by Mr. Baichun Sun in 1995. After several years... |
 |
Radio Probe System | Radio Probe System The wts radio communication probe system is suitable for various complex working conditions in the processing of CNC machine too... |
 |
RPS-20M Radio Probe System | RPS-20M radio probe system contains RP610M touch probe, RSI-20M receiver and standard measuring software. The RP610M is a compact spindle probe wit... |
 |
Machine Probe System in CNC Turning Machine | Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. After several years of development, the company gradua... |
Same products
 |
Fischer Tropsch wax used for road marking paint | 卖方: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is widely used in road marking paints and serves as a key performance additiv... |
 |
Cable Wire Recycling Production Line | 卖方: Changzhou Optima Technology Co.,Ltd. | Cable Wire Recycling Production Line 1000kg Copper Wire Recycling Machines: The biggest ca... |
 |
Small Cable Granulator and Separator | 卖方: Changzhou Optima Technology Co.,Ltd. | Small Cable Granulator and Separator : Small shape,1 phase power,grind and separate copper f... |
 |
Turnkey service of tire recycling | 卖方: Changzhou Optima Technology Co.,Ltd. | Turnkey service of tire recycling At , we specialize in manufacturing advanced tire recyclin... |
 |
Mobile Portable Tire Shredder | 卖方: Changzhou Optima Technology Co.,Ltd. | Mobile Portable Tire Shredder Mobile Portable Tire Shredder – A cost-effective soluti... |
