XLNT-3000 3000W Fiber Laser Cutter Chiller
XLNT-3000 3000W Fiber laser cutter chilleris suitable for 3000W fiber laser cutter. XLNT-3000 adopts intelligent dual-temperature dual-control mode, which can cool the fiber laser generator and QBH connector at the same time. It has an ultra-high temperature control accuracy of ±0.3°C. It is also equipped with professional water filtration and purification equipment, which truly realizes a machine with multiple uses, environmental protection and energy-saving.
Advantage Of XLNT-3000 3000W Fiber Laser Cutter Cooling System
The cooling capacity is 8500W.
It is equipped with protection functions such as flow alarm, high-temperature water alarm and low-temperature water alarm.
The industrial water cooled chillers are equipped with a deionizing filter to ensure the cleanliness of the laser cooling water circuit.
There are multiple fault detections inside to protect the laser in a normal state, and a signal output port is also equipped.
Specification Of XLNT-3000 3000W FiberCo2 Laser Water Chiller
Voltage |
220v |
|
Frequency |
50hz |
60hz |
Current |
4A-17.3A |
|
Compressor power |
||
Cooling capacity |
24566Btu/h |
23884Btu/h |
6192kcal/h |
6020kcal/h |
|
Electric assisted power |
400W+1800W |
|
Refrigerant |
R-22/R410A |
|
Precision |
±0.5℃ |
|
Reducer |
Capillary |
|
Protection |
Over-current protection for compressor, flow alarm, over-temperature alarm |
|
Pump power |
||
Tank capacity |
40L |
|
Inlet and outlet |
Rp1/2'' + Rp1'' |
|
53M |
||
70L/MIN |
||
95KGS |
||
113KGS |
||
Product dimension |
78*47*89CM(L*W*H) |
|
Packing dimension |
87*60*109CM(L*W*H) |
Application Of XLNT-3000 3000W Fiber Laser Cutter Chiller
This chiller for laser machine is suitable for 2000W~3000W fiber laser equipment.
More Details Of XLNT-3000 3000W Fiber Laser Cutter Chiller
On-top Cooling Fan, Ultra-quiet
The Side Panel Wind Tunnel Design, Detachable, Helps Heat Dissipation In All Directions
Equipped With High And Low Temperature Dual Protection
If you are looking for a professional industrial chiller manufacturer, please contact us, and we will be your best partner.
在线联系供应商
Other supplier products
Welding Water Cooler | The welding water cooleris a compact, economical, energy-saving and heat-dissipating circulating cooler, which has the characteristics of portabili... | |
CW6000 Water Chiller For 22KW CNC Spindle | CW6000 Water Chiller is used to cool down the CNC spindle below 22KW. The cooling capacity of CW6000 Water Chiller is 3000W, which can meet the c... | |
CW6000 450W CO2 Laser Water Chiller | CW6000 450W CO2 Laser Water Chiller CW6000 co2 laser water temperature chillerwith a cooling capacity of cw 3000can cool co2 laser tubes below 450... | |
CW5000 Water Chiller For 5kw CNC Spindle | The 800W cooling capacity of CW 5000 water chiller can be used to cool a single 5kw CNC spindle or two 2.2kw CNC spindles. industrial chiller cw 50... | |
Bao-1500 Mobile Welding Fume Extractor | Bao-1500 mobile welding fume extractoris suitable for filtering fume in single station such as manual arc welding, argon arc welding and secondary ... |
Same products
Lz110 Air Suspension Centrifugal Blower/Energy Saving | 卖方: Greentech International (Zhangqiu) Co., Ltd | Air Suspension Bearing:Air suspension bearings use air buoyancy instead of lubricating oil, and u... | |
Manual Tile Cutting | 卖方: 浙江石井工具有限公司 | One of the significant benefits of manual tile cutting is its cost-effectiveness. While automated... | |
玻利维亚-实验室杜瓦瓶-液氮泵 | 卖方: 河南天之道生物科技有限公司 | 在追求精准与高效的现代实验室环境中,样本的妥善储存和液氮的安全输送是十分重要的。我们特此推出专为实验室样品储存设计的液氮罐与液氮泵组合,旨在为您的科研工作提供强有力的支持。 用于细胞储存的液氮杜... | |
Water soluble ink coating painting additive micronized wax | 卖方: Syntop chemical Co.,Ltd. | MicroF_W168 is a water-based micronized polyethylene homopolymer. The average particle size of M... | |
伊拉克-实验室用液氮罐-液氮转移泵 | 卖方: 河南天驰仪器设备有限公司 | 在追求精准与高效的现代实验室环境中,样本的妥善储存和液氮的安全输送是十分重要的。我们特此推出专为实验室样品储存设计的液氮罐与液氮泵组合,旨在为您的科研工作提供强有力的支持。 用于细胞储存的液氮杜... |