.

PRESERVATION LINES

On the preservation line, sheets and profiles are thoroughly blast cleaned and provided with a temporary corrosion protection coating. Along with the external transportation unit, the preservation line consists of a pass through blasting and road shot blasting machine, a painting unit and a drying tunnel with its associated slat conveyor.

Typical plates widths can vary up to 2500mm, height can vary from 5mm to 1000mm, length can vary from 2000mm to 12000mm.

The whole roller conveyor system adopts frequency control step-less speed regulation, is able to synchronous running, each department is capable of independent action.

Blast cabinet’ rollers are with special wear-resistant sleeves to prevent blasting abrasion.

Plate chain conveyor with "v" shaped structure, painted steel short-term exposure to avoid film damage.

Workpiece detection (measure height) adopted world-famous brand photoelectric detection, workpiece width measurement device send a signal to PLC so as to

automatically adjust abrasive feeding valve opening number.

First level: Brush+abrasive reclamation

Second level: high-pressure blower blow the workpiece twice one after another after blast cleaning

Each of the abrasive reclamation system drive points equipped failure alarm function.

Using HR4-48 Donaldson filter material cartridge dust collector, the dust removal efficiency ≥ 99.5%, dust emission is less than 30mg/M3.

Adopting GRACO X45DL4 high-pressure Airless spraying pump, compression ratio 45:1, flow 38L/min,

Using a standard linear guide trolley, frequency conversion buffer on both ends of trolley stroke. Workpiece detection and transmission system separated from the spray gun set, paint mist interference-free, easy to clean paint scale.

Adopt dielectric Heaters and hot air circulation principle so that the heat can be fully utilized.

Drying room temperature adjustable from 40℃ to 70℃

Plate chain conveyor systems increase the eccentrical wheels, which saved the problems of deviation and high rate failure.

This system has automatic explosion-proof alarm function for paint mist concentration. Adopt advanced cardboard to filter paint mist, it is maintenance-free within one year, using activated carbon for adsorption of harmful gases. After this system it will be in accordance with the air pollution emission standards. (Paint mist emission standard ≤ 120mg/M3, p-xylene: emissions concentrations ≤ 70mg/M3, the 15 meters height exhaust pipe allows the secondary emission rate is 1.0kg/h. )

Sandblasting RoomBody

The wall of the sandblasting equipment body uses a noise attenuation sandwich panel with glass wool interlayer and abrasion-resistant rubber liner. The rubber liner also has the noise attenuation function.

As the sand blasting machine manufacturers, QINGGONG MACHINERY mainly supplies four types of partial reclaim systems, including sweep-chute floor, single screw, H-shaped partial reclaim system, and U-shape partial reclaim system.

QINGGONG MACHINERY also offers a full spectrum of blast room reclaim floor designs and configurations. Our full floor reclaim system requires merely a shallow concrete foundation. The type of sandblasting room is carefully designed to lift working effiency.


在线联系供应商

至: QINGDAO QINGGONG SETH MACHINERY CO., LTD.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

OVERHEAD RAIL SHOT BLASTING MACHINE
OVERHEAD RAIL SHOT BLASTING MACHINE Overhead rail shot blasting machine allows the workpieces to move with constant speed through the conveyor sand blasting machine. The conveyor cons...
PRESERVATION LINES
PRESERVATION LINES On the preservation line, sheets and profiles are thoroughly blast cleaned and provided with a temporary corrosion protection coating. Along with t...
BARREL TYPE SHOT BLASTING MACHINE
BARREL TYPE SHOT BLASTING MACHINE The barrel surface blasting machineline provides outstanding performance and reliability. Designed for foundry, forge and heat treat requirements. ...
BARREL TYPE SHOT BLASTING MACHINE
BARREL TYPE SHOT BLASTING MACHINE The Barrel Blast Machine line provides outstanding performance and reliability. Designed for foundry, forge and heat treat requirements. The Barre...
FLOOR SHOT BLASTER
FLOOR SHOT BLASTER Floor shot blasteris a kind of concrete floor shot blasting equipment, steel plates. The floor concrete blastercan clean up the floatation and i...
供应产品

Same products

150TPD Wheat Flour Mill Plant
150TPD Wheat Flour Mill Plant 卖方: solve these problems 150TPD Wheat Flour Mill Plant CAPACITY: PROCESSING 150TONS WHEAT PER 24HOURS Struct...
300-500TPD Wheat Flour Mill Plant
300-500TPD Wheat Flour Mill Plant 卖方: solve these problems 300-500TPD Wheat Flour Mill Plant CAPACITY: PROCESSING 300T-500TWHEAT PER 24HOURS Struc...
42TPD Wheat Flour Mill Plant
42TPD Wheat Flour Mill Plant 卖方: solve these problems 42TPD Wheat Flour Mill Plant CAPACITY: PROCESSING 42TONS WHEAT PER 24HOURS Structure: ...
ETHIOPIA 62TPD Steel Frame Wheat Flour Mill Plant
ETHIOPIA 62TPD Steel Frame Wheat Flour Mill Plant 卖方: solve these problems ETHIOPIA 62TPD Steel Frame Wheat Flour Mill Plant 62TPD Wheat Flour Mill Plant CAPACITY: PR...
maize flour processing plant
maize flour processing plant 卖方: solve these problems maize flour processing plant A is an industrial system used to convert raw maize into finished...