FLANGE FORMING MACHINE
There are mainly two kinds of flange systems of duct connection. American standard and European standard, which is TDF flange recommended by SMACNA association and TTF/LT mate flange as well as improved GDF flange recommended by British Refrigeration Association. Comifo knows flange structure very well, and quite familiar with the standards of duct pressure test and leakage test, including SMACNA, DW144/142, GB50243-97 standards. Comifo flange forming machinecan satisfy different requirements in different markets.
Comifo flange machine adopts heavy duty underpan, arc welding frame, high grade motor, high precision bearing, thermal refined and grinded roll shafts. Its reliable transmission system is free of maintenance. The surface panels have been spray painted.
Flange forming machine series
GDF Flange Forming Machine
TDF Flange Forming Machine
TTF/LT Mate Flange Forming Machine
The air duct flange machinehas independent hydraulic system and electrical control system, which has the advantages of small size, low energy consumption, high efficiency, no noise, etc. In addition, it is easy to install and unload, simple to operate, strong carrying capacity, long life, etc. The air duct flange machine must be put in a dry place, can't let the rain or other impurities into the machine, used for a period of time to add the lubricating oil, make the machine more convenient operation, want to be in a specific time to check the nut in the fuselage, because in the use process is too long will cause the nut loose, so be sure to check regularly, to ensure safety in production, in a certain time for cleaning, make the machine to enhance vitality. Because the duct flange machine needs to work all the time, if you pay attention to maintenance, the efficiency will be reduced and the life will be reduced. The followings are the precautions for the daily maintenance of the duct flange machine.
Comifo Group is a professional flange machine manufacturers, we provide duct forming machine, duct making equipment, duct fabrication equipment and etc. Want to know more? Please contact us.
在线联系供应商
Other supplier products
 |
3-Roller Bending Machine | Model No.: W750,W1300,W1600 Max Thickness: 1.2mm Max Width: 750mm,1250mm,1550mm Roller Diameter: 63mm,63mm,72mm Min Diameter: 88mm,88mm,100mm Suppl... |
 |
RF-12M Lock Former | Model No.: RF-12M Description: Pittsburgh Lock Thickness Range Used: 0.5-1.2mm(18-25ga) Material: 50mm Size: 14.5mm Supply Ability: 10 Sets pe... |
 |
RF-08B Snap Lock Former | RF-08B Snap Lock Former Model No.: RF-08BDescription: Female Snap Lock,Male snap LockThickness Range Used: 0.35-0.8mm(22-31ga)Material: 32mm,17.5m... |
 |
FHR-1600 Spiral Tube Forming Machine | Model No.: FHR-1600 Diameter Range: 100-1600mm Length of the Tube: 100-8000mm Thickness Range: 0.4-1.2mm(18-30ga) Speed: 0-40m/min(0-32FPM) Coil Wi... |
 |
FHNR-1400 Spiral Tube Forming | Model No.: FHNR-1400 Diameter Range: 100-1400mm Length of the Tube: 100-8000mm Thickness Range: 0.4-1.2mm(18-30ga) Speed: 0-10m/min(0-32FPM) Coil W... |
Same products
 |
Floral Garden Tools Set | 卖方: Dongyang Guorui Industry And Trade Co., Ltd. | Investing in a floral garden tools set not only enhances your gardening experience but also add... |
 |
希腊-小型气相液氮储存罐-液氮容器 | 卖方: 河南天之道生物科技有限公司 | 在科技不断进步的今天，随着现代科研和医疗领域对生物样本的低温保存要求越来越高，小型气相液氮罐的出现，成为这一领域的理想选择。下面KGSQ厂家为您具体介绍一下它的优势特点。 1.气相/液相储存 小... |
 |
Common Rail FuCommon Rail Fuel Injector Nozzle L500PBCel Injector Nozzle L500PBC | 卖方: 738347 | Common Rail Fuel Injector Nozzle L500PBC 0 445 110 189 Injector Valve Set 0 445 110 190 Injector... |
 |
匈牙利-小型气液相液氮罐-液氮容器 | 卖方: 河南天驰仪器设备有限公司 | 在科技不断进步的今天，随着现代科研和医疗领域对生物样本的低温保存要求越来越高，小型气相液氮罐的出现，成为这一领域的理想选择。下面KGSQ厂家为您具体介绍一下它的优势特点。 1.气相/液相储存 小... |
 |
波兰-小型气相液氮罐-气相储存容器 | 卖方: Henan Tianzhidao Biological Technology Co., Ltd. | 在科技不断进步的今天，随着现代科研和医疗领域对生物样本的低温保存要求越来越高，小型气相液氮罐的出现，成为这一领域的理想选择。下面KGSQ厂家为您具体介绍一下它的优势特点。 1.气相/液相储存 小... |
