Industrial Centrifuge Machine
Centrifugal concentrator is a kind of equipment for gravity separation of ore particles in a centrifugal force field, which is one of the high-efficiency gravity separation equipment. Our industrial centrifugemainly include horizontal centrifuge machine and vertical centrifuge equipment. Inquiry competitive centrifuge machine pricedirect from centrifuge manufacturer.
Vertical Centrifuge
The components of a vertical centrifuge includes a screen, a rotor body, a transmission device, a body, a lubrication system, etc.
Horizontal Centrifuge
Horizontal vibrating centrifuges are centrifugal dehydrators. This series of horizontal vibrating centrifuges are mainly used for the dehydration of fine and medium coal.
Principle of Industrial Centrifuge Machine
The drum of the industrial centrifuge machine rotates at a high speed with a certain number of revolutions, and the slurry is sent to the inner wall of the drum in two places through the feed distributor. The pulp rotates at a high speed with the drum. Under the action of centrifugal force, the heavy minerals deposit on the inner wall of the drum and rotate with the drum. The light mineral particles in the pulp rotate with the drum at a certain differential speed. In the process of rotation, they flow from the feeding end to the discharge end at a certain spiral angle along the drum slope direction, and then discharge through the discharge separator at the end, which is tailings. After 3 minutes of separation, the feed separator automatically turns to the position of discharging concentrate and stops feeding to the drum. After the tailings are discharged, the discharge separator automatically turns away from the original normal position and is ready to intercept the concentrate. Then the high-pressure flushing water valve automatically opens and the concentrate deposited on the inner wall of the drum is washed down by the high-pressure flushing water. After the concentrate is washed out, the high-pressure water valve automatically closes, the discharge separator and feed separator reset automatically to start the next separation cycle.
Structure of Industrial Centrifuge Machine
Industrial centrifuge machine are mainly composed of separation mechanisms and auxiliary mechanism.
Separation mechanism. The drum of the centrifuge is the separation structure. The drum is hollow cone-shaped and the inner surface slope of the drum is 3° to 5°. It can be made of cast steel, cast iron or FRP, etc. The drum is fixed on the shaft through the chassis and rotates with the shaft.
Auxiliary mechanism. There are many auxiliary mechanisms of Industrial centrifuge machine, which are mainly composed of feeding device, discharging device, flushing device and their action program control device. The main working parts of the horizontal centrifuge are truncated cone drums with a half cone angle of 3°～5°, which is fixed on the horizontal axis with the help of the chassis, and the motor drives the drum to rotate through the V-belt.
What are the Influencing Factors to the Industrial Centrifuge Machine?
The factors affecting the separation index of industrial centrifuge machine can also be divided into two aspects: structure factor and operation factor. But the difference is that the influence of operation factors is related to the structural parameters of the equipment.
The structural factors of the industrial centrifuge machine mainly include the diameter, length and half cone angle of the drum. Increasing the diameter of the drum can improve the production capacity of the equipment in direct proportion; Increasing the length of the drum can greatly improve the production capacity of the equipment, but the lower limit of the recycled particle size will also rise. Increasing the half cone angle of the drum can improve the quality of high-density products, but the recovery rate will decrease accordingly. In order to solve this contradiction, our centrifuge manufacturer have developed double taper, three taper and even four taper centrifuge machine.
The operation factors of industrial centrifuge machine mainly include feed concentration, feed volume, drum speed, feed time and separation cycle. When centrifuges of different specifications process the same material, the feed volume per unit drum wall area should be approximately equal, and the feed concentration should increase with the increase of drum length; When the same equipment is used to treat different materials, the influence of feed concentration and volume is the same as other chute equipment. The speed of the drum is approximately inversely proportional to the square root of the product of the drum diameter and length. In a certain range, increasing the rotation speed can improve the recovery rate, but the quality of high-density product is reduced due to poor stratification effect.
As one of centrifuge suppliersand centrifuge manufacturers, we can provide different centrifuge typesfor sale, if you have needs, please contact us.
There are many heavy equipment companiesin China, but we are one of the best choices for you.
在线联系供应商
Other supplier products
 |
Thrust Roller | CIC is a more than 30-year manufacturer and reputed supplier of thrust rollerused in rotary kilns, rotary type driers and so on. CIC has been speci... |
 |
Liner | Liner is to protect the shell from direct impact and friction of grinding materials and is also used to modulate the motion of grinding material. I... |
 |
Overflow Ball Mill | n recent years, with the continuous development of grinding technology, wet grinding has become the mainstream process, overflow type ball millis t... |
 |
Furnace Robotic Arm Machine | With the development of modern science and technology, industrial arm is a kind of high-tech automatic intelligent mechanical production equipment ... |
 |
Dry Ball Mill | Dry ball millis suitable for all kinds of metal and nonmetal ores, including materials that will react with water, such as cement, marble, and othe... |
Same products
 |
玻利维亚-实验室杜瓦瓶-液氮泵 | 卖方: 河南天之道生物科技有限公司 | 在追求精准与高效的现代实验室环境中，样本的妥善储存和液氮的安全输送是十分重要的。我们特此推出专为实验室样品储存设计的液氮罐与液氮泵组合，旨在为您的科研工作提供强有力的支持。 用于细胞储存的液氮杜... |
 |
伊拉克-实验室用液氮罐-液氮转移泵 | 卖方: 河南天驰仪器设备有限公司 | 在追求精准与高效的现代实验室环境中，样本的妥善储存和液氮的安全输送是十分重要的。我们特此推出专为实验室样品储存设计的液氮罐与液氮泵组合，旨在为您的科研工作提供强有力的支持。 用于细胞储存的液氮杜... |
 |
巴拿马-大口径液氮容器-液氮泵 | 卖方: Henan Tianzhidao Biological Technology Co., Ltd. | 在追求精准与高效的现代实验室环境中，样本的妥善储存和液氮的安全输送是十分重要的。我们特此推出专为实验室样品储存设计的液氮罐与液氮泵组合，旨在为您的科研工作提供强有力的支持。 用于细胞储存的液氮杜... |
 |
stoving varnish square flower pot | 卖方: Taizhou Jiesheng Plastic Co.,Ltd | Paint Self Watering Flower Pot Top/bottom diameter/height35/24/37cm/35/24/59cm/43/31/79cmmaterial... |
 |
匈牙利-自增压液氮罐-液氮容器价格 | 卖方: 河南天之道生物科技有限公司 | 液氮作为现代科研与工业领域的关键冷却介质，其存储与供给方式直接影响实验与生产的效率与安全性。为此，我们精心设计了液氮供应罐系列，旨在为用户提供一个高效、安全、可靠的低温存储解决方案。 液氮供应罐... |
