Dry Ball Mill
Dry ball millis suitable for all kinds of metal and nonmetal ores, including materials that will react with water, such as cement, marble, and other building stones, or products that require storage and sales in the form of powder. In addition,among all ball grinding machine, if the concentrator is located in an arid area and water resources are scarce, dry grinding ball mill can be used for water saving.
Advantages of Dry Grinding Ball Mill
Dry ball mill need less water, which greatly saves water consumption compared with wet ball mill.
The material produced by dry ball mill is the finished product.
The efficiency of dry ball mill is higher.
Available for cement ball mill.
Working Principle of Dry Ball Mill
The dry grinding ball mill is a horizontal cylindrical rotating device, which is driven by outer gear. It is divided into lattice type dry ball mill and multi-bin type dry ball mill. The material enters into the front bin of the mill through the feeding device, and the hollow shaft screw evenly enters into the front bin of the mill. There are stepped lining plates or corrugated lining plates in the bin, which are filled with steel balls of different specifications. The rotation of the cylinder generates centrifugal force to bring the steel balls to a certain height and then fall down, which has a heavy impact and grinding effect on the material. After rough grinding in the front bin, the materials enter the second bin through a single-layer partition board. The bin is inlaid with a flat lining board and steel balls to further grind the materials. The powder is discharged through the discharging grate plate to complete the industrial grinding mill operation.
Main Structure of Dry Ball Mill
Feeding screw for feeding raw material.
The shell is equipped with a manhole for maintenance and replacement of the inner liner.
Discharge part for ball mill to discharge qualified products.
Main bearing.
Transmission part.
Operation and Maintenance of Dry Ball Mill
Before the ball mill is started, check whether the connecting bolts are tightened, including gears, couplings, etc. Check whether the oil tank and reducer have enough quantity; Whether the whole lubricating device and instrument are defective and whether the pipeline is smooth. Finally, check whether there are any sundries around the ball mill and classifier. Only if everything is clear can we get the ball mill to work.
Intelligent Grinding Expert System Ball Mill
To realize the intelligent control for ball mill operation, we provide the intelligent grinding expert system. It will monitor the situation of ball mill working and the finished products status. Lower the labour cost with great efficient.
Technical Parameters of Dry Ball Mill
|
Specification |
Capacity |
Rotary Speed |
Input Size |
Grinding Medium Load |
Volume |
Motor |
Profile Dimensions(L×W×H) |
Total Weight |
Remarks |
|
|
m |
t/h |
r/min |
mm |
t |
M3 |
Power/kw |
Voltage/V |
mm |
t |
|
|
φ2.2×6.5 |
15-16 |
22 |
＜20 |
22 |
18 |
320 |
6000 |
52 |
||
|
φ2.2×8 |
30 |
＜25 |
45 |
560 |
6000 |
81 |
||||
|
φ2.2×13 |
29-30 |
＜25 |
60 |
43 |
630 |
6000 |
||||
|
φ2.2×13 |
24-35 |
＜25 |
60 |
43 |
630 |
6000 |
113 |
|||
|
φ2.2×13 |
40 |
＜25 |
65 |
50 |
800 |
6000 |
145 |
|||
|
φ3×9 |
36-42 |
＜25 |
70-80 |
1000 |
6000 |
|||||
|
φ3×11 |
60-65 |
＜15 |
90-100 |
69 |
1250 |
6000 |
180 |
|||
|
φ3.2×7+1.8 |
48-63 |
18 |
＜20 |
55-58 |
1000 |
6000 |
||||
|
φ3.4×7+1.8 |
54 |
＜20 |
65 |
1000 |
6000 |
(22.057+a)×5.12×4.23 |
a is the length of the motor |
|||
|
φ3.4×7.5+1.8 |
~60 |
＜20 |
70 |
1250 |
6000 |
214-217.5 |
||||
|
φ3.5×10 |
75 |
＜20 |
80 |
1250 |
6000 |
270 |
||||
|
φ3.5×9 |
90-95 |
＜15 |
130 |
94 |
2000 |
6000 |
||||
|
φ3.8×8.5+3.5 |
~90 |
＜20 |
100 |
1600 |
6000 |
|||||
|
φ4.8×8.5+3.5 |
150 |
15 |
＜20 |
150 |
2800 |
|||||
|
φ4.6×10+3.5 |
190 |
15 |
＜25 |
190 |
157 |
3550 |
352 |
|||
|
φ4.6×9.5+3.5 |
185 |
＜25 |
175-180 |
148 |
3550 |
6000 |
293 |
|||
|
φ4.6×14 |
185-220 |
15 |
210 |
185 |
4200 |
310 |
||||
As one of heavy equipment dealers, we will do our best to meet all the needs of clients.
在线联系供应商
Other supplier products
 |
SAG Mill | SAG Mill Semi autogenous mills or SAG mills as they are often called, can perform grinding operations equivalent to two or three stages of crushin... |
 |
Thrust Roller | CIC is a more than 30-year manufacturer and reputed supplier of thrust roller used in rotary kilns, rotary type driers and so on. CIC has been spec... |
 |
Wet Grid Ball Mill | Wet Grid Ball Mill Wet ball millis a kind of energy-saving industrial grinding mill which adopts rolling bearings and has high efficiency. Wet g... |
 |
Calcium Carbide Furnace Tap Hole Machine | Dig furnace robot arm control has a walking mechanism, multi-station operator, hydraulic, electronic control, and other components. The operation i... |
 |
Sludge Dryer Machine | CIC's sludge drying machine process was originally developed for the development of high viscosity media in the concentrating chemical industry and... |
Same products
 |
Floral Garden Tools Set | 卖方: Dongyang Guorui Industry And Trade Co., Ltd. | Investing in a floral garden tools set not only enhances your gardening experience but also add... |
 |
希腊-小型气相液氮储存罐-液氮容器 | 卖方: 河南天之道生物科技有限公司 | 在科技不断进步的今天，随着现代科研和医疗领域对生物样本的低温保存要求越来越高，小型气相液氮罐的出现，成为这一领域的理想选择。下面KGSQ厂家为您具体介绍一下它的优势特点。 1.气相/液相储存 小... |
 |
Common Rail FuCommon Rail Fuel Injector Nozzle L500PBCel Injector Nozzle L500PBC | 卖方: 738347 | Common Rail Fuel Injector Nozzle L500PBC 0 445 110 189 Injector Valve Set 0 445 110 190 Injector... |
 |
匈牙利-小型气液相液氮罐-液氮容器 | 卖方: 河南天驰仪器设备有限公司 | 在科技不断进步的今天，随着现代科研和医疗领域对生物样本的低温保存要求越来越高，小型气相液氮罐的出现，成为这一领域的理想选择。下面KGSQ厂家为您具体介绍一下它的优势特点。 1.气相/液相储存 小... |
 |
波兰-小型气相液氮罐-气相储存容器 | 卖方: Henan Tianzhidao Biological Technology Co., Ltd. | 在科技不断进步的今天，随着现代科研和医疗领域对生物样本的低温保存要求越来越高，小型气相液氮罐的出现，成为这一领域的理想选择。下面KGSQ厂家为您具体介绍一下它的优势特点。 1.气相/液相储存 小... |
