.

Insert Molding

What is insert hanking moulding?

Insert molding solutionsof hanking refers to a hanking mould technologyprocess in which an integrated product is made by inserting a pre-prepared metal material insert into a hanking mouldand then injecting the plastic resin, and the molten material is bonded to the insert, cooled and solidified.

Insert molding features are as follows:

The moldability and flexibility of plastic resins, as well as the rigidity, strength and heat resistance of metal parts, create complex and sophisticated metal-plastic integrated products.

In particular, the electrical product made by insert hanking mold, together with the insulation of the resin and the electrical conductivity of the metal, can meet the basic functions of electrical products.

The pre-formed combination of multiple inserts makes the subsequent product unit combination engineering more rational.

Inserts are not limited to metal, but also cloth, paper, wire, plastic, glass, wood, wire, electrical parts and so on.

For the rigid molded product and the curved elastic molded product on the rubber gasket plate, the parts by insert molding can eliminate the complicated operation of installing the sealing ring, and help the subsequent process automation.

Compare to the press-in molding, the metal insert gap can be designed to be narrower, and the reliability of the composite product molding is higher as the plastic resin is molten to wrapped with the metal insert.

Selecting the appropriate plastic resin and injection molding conditions, even for products that are easily deformed or broken (such as glass, coils, electrical parts, etc.), can be sealed and fixed by insert molding with plastic resin.

Designed the appropriate mould construction, the insert can also be completely enclosed in the plastic resin.

By the combination of a vertical injection molding machine and a robot, insert arranging mechanism, most of the insert molding projects can be automated.

The product with a hollow groove also can be made by insert molding after the core hold treatment.

Automatic insert molding system design points:

The shrinkage rate of metal insert molding is not uniform, and the limit test of the shape and dimensional accuracy of the important areas should be done in advance.

The metal insert of shenzhen hanking has the possibility of deformation and displacement during the injection process, and the designer should be fully considered about mould construction to help stabilize the metal insert. For products whose insert shape cannot be changed, prior testing is indispensable.

Where the arrangement of the metal inserts is separated and the conveyor is used, the contact between the metal inserts and the plastic and the vibrating balls may cause slight damage to the surface of the insert, which may affect the quality of the product, the quality tolerance limit should be confirmed in advance.

The zigzag shape, the amount of warpage, the difference in material thickness, the difference in diameter, and the difference in thickness due to metal plating processing of the metal insert due to the press working should be determined in advance. Carried out the design of the automation device and the design of the mould structure on this basis.

Mould gate position, molding cycle time, etc., which are the key points of the mould structure, are solved as much as possible or have corresponding improvement solutions.

It should be confirmed whether the metal insert needs to be preheated or dried. The aim is to ensure the quality and stability of the molding.

The various testing devices installed in the mold are used to prevent the molding action from being affected by environmental conditions such as heat, force, vibration, etc., and it should be confirmed whether it is used or not.

Established in the year of 1996, HanKing Mould Enginering Ltd. starts the business in mold making and injection mold service china. hankingtec sincerely invite and welcome people from all around the world to invest and create more values together.



在线联系供应商

至: HANKING MOULD ENGINEERING LTD.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

ABS Plastic Injection Mold 49443
ABS Plastic Injection Mold 49443 Brief Introduction of Hanking ABS molds Mould Name: Plastic Injection ABS Molds Part Material: ABS Product Size: 172*123 mm Product Descr...
2k Injection Mold
2k Injection Mold 2k mouldspecification Part function: Water plastic manifold Part material: PP & TPE Shrinkage: 1.6% Cavity: 1 cavity Mould base: 1.1730 A...
Plastic Injection Moulding Die Makers
Plastic Injection Moulding Die Makers Plastic Injection Moulding Die Makers Plastic mould die makerin China Focus on all kinds of mould development, various plastic mold manufactu...
Precision Automotive Parts
Precision Automotive Parts Mould Name: Precision Automotive PlasticsMould Part Material: PA66 G30 Product Description: BODY plastic Mould Cavity: Cavities Mold Mo...
Custom Injection Mold Making Services for Auto Parts
Custom Injection Mold Making Services for Auto Parts Mould Type: Automotive Final Sensor Production Material: 33% glass fiber reinforced, black PA 6/12 No of Cavities: 4 cavities Core Material: S7...
供应产品

Same products

Honeywell BW MicroClip Series XT-XWHM-Y-CN
Honeywell BW MicroClip Series XT-XWHM-Y-CN 卖方: CW Green Tech Honeywell BW MicroClip Series XT-XWHM-Y-CN The industrial Honeywell BW™ MicroClip Series i...
High-Efficiency Sludge Dewatering Machine for Wastewater
High-Efficiency Sludge Dewatering Machine for Wastewater 卖方: Apoaqua The sludge dewatering machine produced by Apoaqua follows the principles of force and water in th...
Climate And Vibration Combined Test
Climate And Vibration Combined Test 卖方: Guangdong Yuanyao Test Equipment Co.,Ltd. Model: YTHV-216 YTHV-343 YTHV-512 YTHV-720 YTHV-1000 Main Parameters: Temperature: 0℃/-20℃/...
High Temperature Clean Drying Oven
High Temperature Clean Drying Oven 卖方: Guangdong Yuanyao Test Equipment Co.,Ltd. Model: YCO-072 YCO-270 YCO-480 YCO-600 YCO-720 YCO-1000 Main Parameters: Dustproof class: C...
Air-ventilation Aging Test Chamber
Air-ventilation Aging Test Chamber 卖方: Guangdong Yuanyao Test Equipment Co.,Ltd. Model: YTAT-101 | YTAT-216 Main Parameters: Temperature range: RT+25℃~200℃(300℃) Tempera...