Portable Magnetic Flux Leakage Testing Equipment
MFLequipmentrefers to the formation of a leakage magnetic field on the surface of a test piece after it is magnetized due to defects on the surface or near-surface of the test piece. People can detect defects by detecting changes in the leakage magnetic field.
Briefly describe the magnetization of ferromagnetic components. In the magnetic non-destructive testing, magnetization is the first step to realize the detection, which determines whether the leakage magnetic field signal can be generated, and also affects the performance characteristics of the detection signal and the structural characteristics of the detection device. Like magnetic particle inspection, magnetization is achieved by a magnetizer, including both a magnetic source and a magnetic circuit. The magnetic source and the magnetic circuit change depending on the structure of the member to be tested.
What kind of magnetization can be divided into several categories? The magnetization methods can be generally divided into five categories, namely, alternating current magnetization mode, direct current magnetization mode, permanent magnet magnetization mode, composite magnetization mode, and integrated magnetization method.
What are the characteristics of magnetic flux leakage equipment?
Because leakage magnetic field detection uses magnetic sensors to detect defects, compared with magnetic powder, penetration and other methods, it has the following advantages:
BKN's portable magnetic flux leakage testing equipment are capable of detecting workpieces efficiently and accurately.
在线联系供应商
Other supplier products
 |
Magnetic Flux Leakage Testing Equipment | Electromagnetic detection is a very important non-destructive testing method and is widely used. Mag flux testingis a magnetic method of nondestruc... |
 |
EDM Notch | Nanjing BKN Automation System Co., Ltd., originated from the eddy current testing laboratory of the Nanjing University of Technology. It is an eddy... |
 |
EDM Notch | An electric pulse is a pulse generated by electrons, and a pulse is a process of changing a voltage in a short time. Electropulsing is an unsteady ... |
 |
Application of Ndt Inspection Equipment | Ndt inspection equipmentis widely used in industry, such as nuclear industry, weapon manufacturing, machinery industry, shipbuilding, petrochemical... |
 |
Steel Bar Testing | The steel bar is rolled by a rolling mill and produce both surface defects and internal defects during the rolling process. The internal defect is ... |
Same products
 |
Hot Forging Of Steel Billets | 卖方: Chengdu Duolin Electric Co.,Ltd | Hot Forging Of Steel Billets Induction is refered to heat the metal part to forging temperat... |
 |
Lost Wax Casting Y Piece FlowSplit Fitting | 卖方: Qingtian Baoli Casting Co., Ltd. | Lost Wax Casting Y Piece FlowSplit Fittingis produced through the lost wax casting method, enabli... |
 |
Mini Nitrogen Generator | 卖方: 0000 | Mini Nitrogen Generator Mini Nitrogen Generator Are you looking for a reliable, cost-effe... |
 |
filter press in chemical industry | 卖方: 00000 | Our for Chemical Industry is designed to meet strict safety and environmental standards, en... |
 |
Laser Cutting Service China METAL FINISHING | 卖方: 大连卓晟科技有限公司 | Laser Cutting Service ChinaMETAL FINISHING Laser Cutting Service ChinaMETAL FINISHING-China Dal... |
