Mud Pump
Ram BOP
Single and double ram type BOPs are widely used in oilfield and offshore platform. They have the features of compact structure, easy handling and reliable seal. The pipe ram adopts the pressure increasing seal way, which makes it seal drill tool rapidly and efficiently, even remain its seal effect after the disappearance of fluid control pressure.
The open or close of ram preventor and ram replacing are both hydraulically controlled. The onsite replacing of pipe ram and sealing parts saves much time.
•Driving mode：Manual & hydraulic
•End connection：Flanged and bolted
•Working pressure：2000~10000PSI
•Nominal bore：90mm、120mm、179.4mm、279.4mm、346mm
•Executive standard: API 16A and relevant specification
Annular BOP
In case of blowout and well-sealing is needed,high pressure oil coming from control system enters the bottom closing chamber from bottom inlet to push piston moving upward.The movement of piston forces tubber core to move upward along the sphere surface, then supporting ribs get closer to push the internal rubber towards the wellhead center to fulfill the function of sealing drill equipment or the wellhead. When unlocking the seal is needed,hydraulic oil pushes the piston moving downward and the rubber core will reset to its original under its elastic force.
Structure Characteristics
1.The connection between top cap and housing ,top and bottom ends adopt flanges and bolts.
2.Semisphere rubber core has many advantages,such as not easy folding back, big volume of rubber storage.Under the well pressure,the piston pushes the rubber core upward to form a funnel shape.The funnel effect of rubber core increases its sealing performance and life span.
3.Characteristics of the sealing structure
Choke and Kill manifold
Choke manifold and Killing manifold are the important well control equipments to carry out close balance drilling in petroleum exploration. During well drilling process, these equipments can keep oil reservoir from pollution and efficiently control well blowout. That product designs a manufacturing according to the API Spec 16 C standard, the machine function is good, sealing completely credibility, the function is well-found, operating convenience.
Main Technical Parameters
Name Choke Manifold Killing Manifold
Type JG35 YJG35 YJG70 YJG70A YJG35 YG70 YG70A
Main&side passage diameters 103×65mm
Working pressure 35MPa 70MPa 35MPa 70MPa
Working medium -29~121 ℃
Working medium ud oil (H 2 S)
Type of control Double wing
manual Double hydraulic Triple wing hydraulic Single wing with clea valve
Mud manifold
The mud manifold is applicable on land and forms a complete set with the drilling, Which working temperature is -29～121℃,medium is water or mud, and connections are threaded or flanged.
MAIN TECHNICAL PARAMETERS
Working Pressure psi(MPa) 2000～10000(14～70) Nominal Bore in(mm) 2～4 (50～100)
Product Specification Level PSL 1～3 Material Class AA～FF
Performance Requirement Level PR 1～2 Working Temperature P.U
(-29～121℃)
Other supplier products
|
|
Mud Pump |
Safety Joint
The Safety Joint Type AJ is an essential safety tool for connecting the pipes in the well. In the safety joint body, there are the c... |
|
|
Junk Mills |
DrawWorks
The Single-shaft Electric Drawwork:
The drawwork is single-shaft with grooved drum structure, has less spare parts, small cubage, ligh... |
|
|
Mud Pump |
Design Features：
Standard bail and double pin (male) alloy sub
The washpipe and packing are box structure, convenient to replacing on drill flo... |
|
|
Junk Mills |
Design Features：
The housing assembly is made of thick section steel plate to provide enough weight.
The wire line is kept taut when hoisting or ... |
|
|
Junk Mills |
Blowout Preventor(BOP)
Ram BOP
Single and double ram type BOPs are widely used in oilfield and offshore platform. They have the features of compa... |
供应产品
Same products
