Mud Pump
Type SJ
Shock Absorber Type SJ should be connected with the drilling string close to the bit. It can reduce or absorb both longitudinal and circumferential vibration of the drilling string in drilling operations. It can achieve the optimum combination of drill pressure and drill speed, reduce the drilling cost and promote the drilling efficiency.
Hydraulic Shock Absorber Type YJ
Hydraulic Shock Absorber Type YJ should be connected with the drilling string close to the bit. It can absorb or reduce axial vibration and thrust load of the drilling string, and have a good result for prolonging the service life of the bit and protecting the drilling tools as well as surface equipment.
Mechanical-Hydraulic Shocker Absorber Type DHJ
Mechanical-Hydraulic Shocker Absorber Type DHJ is a new type double-acting shock absorber. It absorbs the pulsation and shock from drill tools by compressing spring and silicon oil to store the energy. This shock absorber has advantages of good maintainability, bearing high load and long service life.
Specifcation of Mechanical-Hydraulic Shocker Absorber Type DHJ
TYPE OD in(mm) ID in(mm) Tool Joint Connection
API Max. Tensile Load Lbf(N) Max. Drill Pressure Lbf(N) Max. WorkingTorque Lbf-ft(N•m) Max. Stroke in(mm) Ambient Temp.
℃ Overall Length “Extended” ft-in(mm)
DHJ121 4-3/4
(121) 1-1/2
(38) 3-1/2REG 220,320
(980,000) 89,920
(400,000) 7,370
(10,000) 4
(100) -40℃
~ +150℃ 11’ 2”
(3,400)
DHJ159 6-1/4
(159) 2
(51) NC46 337,230
(1,500,000) 134,890
(600,000) 10,840
(14,700) 4-3/4
(121) 13’ 10”
(4,210)
DHJ178 7
(178) 2-1/4
(57.2) NC50 337,230
(1,500,000) 134,890
(600,000) 10,840
(14,700) 4-3/4
(121) 13’ 10”
(4,210)
DHJ203 8
(203) 2-13/16
(71.4) 6-5/8REG 449,640
(2,000,000) 157,370
(700,000) 14,450
(19,600) 5-1/2
(140) 15’ 5”
(4,700)
Other supplier products
|
|
Junk Mills |
Crown Block
The crown frame is made of high strength steel shapes.
Sheave grooves are hardened by medium frequency induction to provide extended ... |
|
|
Mud Pump |
Design Features：
The housing assembly is made of thick section steel plate to provide enough weight.
The wire line is kept taut when hoisting or... |
|
|
Downhole Motor |
Heavy Weight Drill Pipe
Integral or Weld Heavy Weight Drill Pipe
Standard: API Spec 7
Specification: OD 3 1/2”, 4 1/2”, 5”, 5 1/2”
Material: AI... |
|
|
Junk Mills |
Valves
Check Valve
Usually used for Kill Manifold
The sealing face of core and seat is overlaying-welded with hard alloy with erosion and corr... |
|
|
Mud Pump |
1. The substructure is divided into prizing-trailers, truck-mounted, entrusted Pack, me block, double-up, spin-up, and so on.
2. Box-block struc... |
供应产品
Same products
