Junk Mills
Line pipes
Standard: According to API Spec 5L standard.
Use: Used as oxygen, water, and oil delivery pipe in oil and natural gas industry
Steel grade:
•PSL1: A25,A,B,X42,X46,X52,X56,X60,X65,X70
•PSL2: B,X42,X46,X52,X56,X60,X65,X70,X80
Type: Seamless line pipe
Weld pipe(SAW and ERW)
Size:
Wall thickness: 2.77mm ~ 18.26mm
Seamless line pipe OD ≤13 3/8”
Weld pipe line pipe OD≥13 3/8”
Length: R1/R2/R3
Dimension Tolerance：
Steel Pipe Specification Steel Pipe Outside Diameter（D） Steel Pipe Wall Thickness（S）
Pipe Body Steel Pipe Outside Diameter (mm) Allowable deviation (mm) Steel Pipe Outside Diameter (mm) Allowable Deviation (mm)
≥60.3andS＜20 ±0.75％ ≤73.0 ＋15％，－12.5％
≥60.3andS≥20 ±1.00％ ＞73.0andS＜20 ＋15％，－12.5％
＞73.0andS≥20 ＋17.5％，－10
Mechanical Property：
Standard Model Tensile Strength（MPa） Yield Strength（MPa） Yield Strength
Ratio Tensile Stretch（％） Ballistic Work
Akv（J） Heat Treatment
State
API SPEC 5L
GB/T9711.2 B ≥415 245～440 ≤0.80 22 ≥40 normalizing
X42 ≥415 290～440 ≤0.80 21 ≥40 normalizing
X52 ≥460 360～510 ≤0.85 20 ≥40 normalizing
X60 ≥520 415～565 ≤0.85 18 ≥40 normalizing
Other supplier products
|
|
Mud Pump |
Integral or Weld Heavy Weight Drill Pipe
Standard: API Spec 7
Specification: OD 3 1/2”, 4 1/2”, 5”, 5 1/2”
Material: AISI 4145H Alloy Steel and ... |
|
|
Junk Mills |
Derrick (Mast)
Derrick is divided into A, K, the tower type, masts and other types of packages.
1. A cross-section of a derrick thigh, such as r... |
|
|
Junk Mills |
Mechanical Drilling Jar
Type JZ
This full mechanical drilling jar offers mechanical jarring in both directions. The load scope of the up jarring... |
|
|
Mud Pump |
Standard：
API SPEC 5CT Standard of American Petroleum Institute
Steel Grade:
J55, K55, N80, L80, N80-1, N80Q P110 etc．
Diamensional to... |
|
|
Mud Pump |
Design Features：
The housing assembly is made of thick section steel plate to provide enough weight.
The wire line is kept taut when hoisting or... |
供应产品
Same products
