oxygen generator
Oxygen plant
Main technique target of Oxygen plant
Products Capacity （m³/hr） Purity（%） Pressure（Mpa）
Oxygen 50-2000 99.6-99.8 0.25-22
Liquid Oxygen Right amount 99.6-99.8% 0.25
Nitrogen 50-3000 99.99-99.999 0.5-22
Liquid Nitrogen Right amount 99.99-99.999 0.5-1.1
We can provide the special designs as the user requires.
Main equipment of Oxygen plant
1、 Air compressor
2、 Air tank
3、 Precision filter
4、 Air pre-cooling system
5、 Water separator
6、 Molecular sieve purification system
7、 Heater or molecular sieve purification system
8、 Rectification column
9、 Heater or the rectification column
10、Gas bearing turbo-expander
11、Liquid Oxygen Pump
12、Filling device
13、Electrical & instrument control system
14、Liquid storage tanks
15、Gas cylinders, etc
Main Features of Oxygen plant
* This development and design of flow is new, my company use the technology to mature.
* Simple operation, convenient maintenance, starting time is short, unit power consumption is low.
* Oxygen of high purity and very stable, meet and exceed technical indicators of GB8982-1998《medical oxygen》
* Use of air cooling equipment, do not need cooling water, adaptable, saving the cost.
*Security -- The outside compression process is oxygen be compressed at room temperature, The inside compression process is liquid oxygen be compressed at low temperature, Security than more with the inside compression process； Extraction a lot of liquid oxygen from evaporation-condenser, To ensure that no accumulation of hydrocarbons; Evaporation of high pressure with liquid oxygen, reducing the possibility of hydrocarbon accumulation; Reducing fire hazards.
* Reliability - liquid oxygen pump excellent performance, easy to maintain; Booster compressor is one or two compression, oxygen compressor Booster compressor is three or five compression, High reliability with booster compressor.
Other supplier products
|
|
oxygen generator |
Working principle
According to the compressed air in a variety of gas solubility and diffusion coefficient of the difference in the membrane, re... |
|
|
oxygen generator |
Both marine and terrestrial nitrogen in the oil / gas fields contain every aspect of upstream drilling and production and downstream refining. Nitr... |
|
|
oxygen generator |
Main technique target of Nitrogen Plant
Products Capacity （m³/hr） Purity（%） Pressure（Mpa）
Oxygen
Liquid Oxygen
Nitrogen 50... |
|
|
oxygen generator |
Main technique target of Nitrogen Plant
Products Capacity （m³/hr） Purity（%） Pressure（Mpa）
Oxygen
Liquid Oxygen
Nitrogen 50... |
|
|
oxygen generator |
Working principle
Vacuum pressure swing adsorption air separation oxygen adsorption process of vacuum desorption is a super-atmospheric pressure, ... |
供应产品
Same products
|
|
尖心轨降低值测量尺 |
卖方: 842518 |
辙叉垂直磨耗测量尺用于测量辙叉心轨与翼轨磨损段任意部位的垂直磨耗值及心轨相对于翼轨的缩减值，具有测量精度高、现场工人容易掌握、可靠性高、体积小、重量轻等显著优点。 |
|
|
便携式激光弦线 |
卖方: 842518 |
激光准直仪用于测量轨道水平和线路，以辅助轨道测量和人工捣固作业。它可以测量水平和垂直。它主要由激光发射装置、靶标定位装置和移动定位靶标装置组成。 |
|
|
轨底坡测量装置 |
卖方: 842518 |
Основная часть катания колеса имеет наклон внутрь 1:40. Для того чтобы верхняя часть рельсового п... |
|
|
NGM-6.3II型内燃钢轨打磨机 |
卖方: 842518 |
该机主要用于铁路钢轨维护施工中的焊缝恢复打磨、压延毛刺、轨面修复、波形磨损等。该机不仅仿形精度、打磨效率等技术性能有较大提高，而且由于数控进给单元的开发应用，实现了砂轮进给的智能控制，大大简化了... |
|
|
NCM-5.1型内燃道岔打磨机 |
卖方: 842518 |
NCM-5.1道岔打磨机是专门针对道岔、交叉口及轨头两侧的打磨作业而设计的。该机打磨装置可从垂直方向向左右倾斜30°，并可沿纵横方向调整打磨轮的位置，使该机打磨装置在钢轨间狭小空间内也能... |
