oxygen generator
How it works:At a certain temperature, the residual oxygen in the nitrogen and carbon contained catalyst carbon oxidation reaction occurs to produce carbon dioxide by pressure swing adsorption process to remove, and then after a high-precision filters, high purity nitrogen.Technical characteristics:Efficient carbon catalyst, advanced technology, good stability, high purity nitrogen;
Nitrogen, hydrogen, applies strict requirements place on the hydrogen and oxygen;
Deoxidation and a heater with high temperature materials, safe and reliable;
Increase in preheater device, heat recyclable deoxidation in the deoxy nitrogen, can save over 30% of energy consumption;
Adsorption dryer to remove the CO2 and the depth of dehydration, adsorption capacity, adsorption time, low energy consumption;
The dideoxy tower structure with a prepared, can be added to the continuous use of carbon catalyst to meet the user's continuous without stopping the machine;
Deoxidation tower carbon catalyst after use free of impurities and residual toner, no need to purge carbon catalyst can be added directly;
Imported PLC control, safe and reliable;
Automatic interlock shorting a variety of fault alarm.
Technical indicators:Production of nitrogen products: 10Nm3 / h ~~ 500Nm3 / h
The raw material nitrogen purity: ≥ 99.9%
Finished product nitrogen purity: ≥ 99.9995%
Oxygen content: ≤ 5PPm
Carbon dioxide levels: ≤ 3PPm
Dew Point: ≤ -60 ℃
Other supplier products
|
|
oxygen generator |
The role of catalyst, the reaction of low purity nitrogen, oxygen system by adding hydrogen to generate water to remove residual oxygen after furth... |
|
|
oxygen generator |
Oxygen plant
Main technique target of Oxygen plant
Products Capacity （m³/hr） Purity（%） Pressure（Mpa）
Oxygen 50-2000 99.6-99.8 0... |
|
|
oxygen generator |
Oxygen plant
Main technique target of Oxygen plant
Products Capacity （m³/hr） Purity（%） Pressure（Mpa）
Oxygen 50-2000 99.6-99.8 0... |
|
|
oxygen generator |
Working principle
Vacuum pressure swing adsorption air separation oxygen adsorption process of vacuum desorption is a super-atmospheric pressure, ... |
|
|
oxygen generator |
Both marine and terrestrial nitrogen in the oil / gas fields contain every aspect of upstream drilling and production and downstream refining. Nitr... |
供应产品
Same products
|
|
尖心轨降低值测量尺 |
卖方: 842518 |
辙叉垂直磨耗测量尺用于测量辙叉心轨与翼轨磨损段任意部位的垂直磨耗值及心轨相对于翼轨的缩减值，具有测量精度高、现场工人容易掌握、可靠性高、体积小、重量轻等显著优点。 |
|
|
便携式激光弦线 |
卖方: 842518 |
激光准直仪用于测量轨道水平和线路，以辅助轨道测量和人工捣固作业。它可以测量水平和垂直。它主要由激光发射装置、靶标定位装置和移动定位靶标装置组成。 |
|
|
轨底坡测量装置 |
卖方: 842518 |
Основная часть катания колеса имеет наклон внутрь 1:40. Для того чтобы верхняя часть рельсового п... |
|
|
NGM-6.3II型内燃钢轨打磨机 |
卖方: 842518 |
该机主要用于铁路钢轨维护施工中的焊缝恢复打磨、压延毛刺、轨面修复、波形磨损等。该机不仅仿形精度、打磨效率等技术性能有较大提高，而且由于数控进给单元的开发应用，实现了砂轮进给的智能控制，大大简化了... |
|
|
NCM-5.1型内燃道岔打磨机 |
卖方: 842518 |
NCM-5.1道岔打磨机是专门针对道岔、交叉口及轨头两侧的打磨作业而设计的。该机打磨装置可从垂直方向向左右倾斜30°，并可沿纵横方向调整打磨轮的位置，使该机打磨装置在钢轨间狭小空间内也能... |
