oxygen generator
Methanol in the temperature range of 220 to 300 degrees, cracking in the copper catalyst to generate hydrogen and carbon monoxide, carbon monoxide in the same catalyst under the reaction with steam to produce carbon dioxide, carbon dioxide is removed by pressure swing adsorption process, ultimately producing hydrogen.
The reaction is: of CH3OH = 2H2 + CO, CO + H2O = H2 + CO2, and the total reaction: of CH3OH + H2O = 3H2 + CO2.Process principlesThe reaction is as follows:
The main reaction: CH3OH = CO +2 H2 -90.7KJ/mol
CO + H2O = CO2 + H2 +41.2 KJ / mol
The overall reaction: CH3OH + H2O = CO2 +3 H2 -49.5KJ/mol
Side effects: 2CH3OH = CH3OCH3 + H2O +24.9 KJ / mol
CO +3 H2 = CH4 + H2O +206.3 KJ / mol
Reaction transforming the gas by the heat exchanger, cooling, condensing its composition
H2 CO2 CO CH3OH H2O
Saturation of 73 ~ 74% 23 ~ 24.5% ~ 1.0% 300ppm
The main reaction is an endothermic reaction, the use of external heat conducting oil. Conversion of gas by the heat exchanger, cooling, condensing into the scrubber tower kettle collection not transformed after methanol and water recyclingTechnical indicatorsGas production: 2.5 ~ 300Nm3 / h
Impurities: ≤ 10PPm
Working pressure: 0.05 ~ 1.0MPa
Pressure dew point: ≤ -40 ° C.
Other supplier products
|
|
oxygen generator |
Working principle
According to the principle of pressure swing adsorption using zeolite molecular sieve as adsorbent zeolite molecular sieves have... |
|
|
oxygen generator |
Oxygen plant
Main technique target of Oxygen plant
Products Capacity （m³/hr） Purity（%） Pressure（Mpa）
Oxygen 50-2000 99.6-99.8 0... |
|
|
oxygen generator |
Mobile oxygen production plant is an oxygen generating system built in ISO container. The oxygen is produced from compressed air by pressure swing ... |
|
|
oxygen generator |
Oxygen plant
Main technique target of Oxygen plant
Products Capacity （m³/hr） Purity（%） Pressure（Mpa）
Oxygen 50-2000 99.6-99.8 0... |
|
|
oxygen generator |
Both marine and terrestrial nitrogen in the oil / gas fields contain every aspect of upstream drilling and production and downstream refining. Nitr... |
供应产品
Same products
|
|
尖心轨降低值测量尺 |
卖方: 842518 |
辙叉垂直磨耗测量尺用于测量辙叉心轨与翼轨磨损段任意部位的垂直磨耗值及心轨相对于翼轨的缩减值，具有测量精度高、现场工人容易掌握、可靠性高、体积小、重量轻等显著优点。 |
|
|
便携式激光弦线 |
卖方: 842518 |
激光准直仪用于测量轨道水平和线路，以辅助轨道测量和人工捣固作业。它可以测量水平和垂直。它主要由激光发射装置、靶标定位装置和移动定位靶标装置组成。 |
|
|
轨底坡测量装置 |
卖方: 842518 |
Основная часть катания колеса имеет наклон внутрь 1:40. Для того чтобы верхняя часть рельсового п... |
|
|
NGM-6.3II型内燃钢轨打磨机 |
卖方: 842518 |
该机主要用于铁路钢轨维护施工中的焊缝恢复打磨、压延毛刺、轨面修复、波形磨损等。该机不仅仿形精度、打磨效率等技术性能有较大提高，而且由于数控进给单元的开发应用，实现了砂轮进给的智能控制，大大简化了... |
|
|
NCM-5.1型内燃道岔打磨机 |
卖方: 842518 |
NCM-5.1道岔打磨机是专门针对道岔、交叉口及轨头两侧的打磨作业而设计的。该机打磨装置可从垂直方向向左右倾斜30°，并可沿纵横方向调整打磨轮的位置，使该机打磨装置在钢轨间狭小空间内也能... |
