CNC lathe
Performance:
-
CNC cycle lathe for cost effective batch and single part production;
-
Thislathe ispopular among Europe and America, and a new type CNC lathe with education function well;
-
Unitary lathe base, sealing protection;
-
Imported spindle bearing, with high precision, which have been exported to industrialized country for quantity;
-
Most of the time it can finish the turning of the work-piece in high speed by NCD teaching programming, and also can switch to standard NC teaching programming easily.
-
This lathe is specially suitable for wide range and small order working occasion, and also for the easy training of operating crew.
-
Automatic 4-position tool changer for increased productivity;
-
Gear levels for high pulling force;
-
Frequency inverter drive with infinitely variable speed ofr excellent work results;
-
Two electronic hand-wheels for manual operation;
-
Implemented cycles for facing and plain turning radius, taper, thread, plunge cut and complete contouring.
Standard accessories:
- Fanuc 0i mate TC or FAGOR8055TC
- Coolant system
- Standard work light
- Vertical 4-position electrical turret
- Standard lathe colour
- Manual tailstock
- Manual 3-jaw chuck 325 MM 1 PC
- Manual tools
- Documents
- Half Chip guard
- Automatic lubrication system
- Heat exchanger
- Dead center M5
Optional accessories:
- Hydraulic tailstock
- Six position vertical electric turret
- 12" dead hole hydraulic chuck
- 12" through hole hydraulic chuck
- Steady rest 20-170mm
- Steady rest 170-350mm
- Follow rest 15-120mm
- Live center M5
Main Technical Data:
| Model | SY53 |
| CNC Controlling system | FAGOR 8055TC |
| Max. diameter over bed | Φ530 mm |
| Distance between center | 1500/2000 mm |
| Height of center | 265 mm |
| Width of bed | 400 mm |
| Spindle speed | L:2 steps 25-250 200-500 H:2 steps 400-1000 800-2000 |
| Spindle moter power | 7.5 KW |
| Spindle nose | C8 |
| Diameter in spindle bord | Φ80 mm |
| Diameter of chuck | Standard: Φ250 |
| Power of X.Z.feed motors | 1.8/1.7 KW |
| Rapid traverse rate of X.Z.axis | 4/8 m/min |
| Positioning of X.Z.axis | 0.030/0.045 mm |
| Turnging tol shank size | 25 x 25 mm |
| Diameter of tailstock quill | Φ85 mm |
| Quill stroke | 150 mm |
| No.of taper bore on sleeve | MT4 |
| Repeat positioning | 0.012/0.020 |
| Weight | 3700/4700 kgs |
在线联系供应商
Other supplier products
 |
sales | Performance: Cost-effective precision lathes with extensive standard equipment; Precision ground hardened bedways; The spinlde is supported ... |
 |
Radial Drilling Machine | Performance: Frequency Conversion Radial Drilling Machine; Germany original "Lenze" transducer spindle speed stepless, digital readout ofr the di... |
 |
sales | Powerful Tool Milling Machines; Milling machine for tool construction; Automatic feeds on all 3 axes; Outer arbor supporting for horizontal ... |
|
|
CNC lathe | Performance: CNC cycle lathe for cost effective batch and single part production; Thislathe ispopular among Europe and America, and a new... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
