.

SPM 110/80*680 Double-Layer PP/PS Sheet Extrusion Line

SPM 110/80*680 Double-Layer PP/PS Sheet Extrusion Line
  • SPM 110/80*680 Double-Layer PP/PS Sheet Extrusion Line
供应商: Ruian Sinoplast Machinery Co.,Ltd

供应产品
在线联系供应商

I. QUANTITY: ONE SET
II. MAIN PARAMETERS:
Target materialPP/HIPS/GPPS
Efficient width of sheet680mm(adjustable)
Thickness of sheet0.25～2.0mm
Measurement of the entire machine～12500×1850×2200mm
III.Configuration and specification:
1. No.1 Main Extruder: one
a. #200 model Hard-tooth Gearbox: one.
The body of the gearbox is made from cast steel. The teeth deal with grinding and peeling eventually, which provides different characteristics of damping, antifriction, low-noise, long using period etc.



在线联系供应商

至: Ruian Sinoplast Machinery Co.,Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

SP-110 Granulator (PP/HIPS Recycling Machine)
 SP-110 Granulator (PP/HIPS Recycling Machine) 1.Extruder 2.Dia.Screw:110mm L/D: 26:1 Main motor power: 45KW-6, with 45KW inverter Max.output: 110kg/h Heating power: 4 groups, 6kw/group (total: ...
SPC-660 Automatic Cam Thermoforming Machine (PLC Control)
 SPC-660 Automatic Cam Thermoforming Machine (PLC Control) configuration SP3021B 3in1 Upper Forming Station Servo drive +frequency drive Plug assist Pneumatic or servo motor Cutting station Double Servo dri...
6.SP-135JB Cup Mouth Rolling Machine
 6.SP-135JB Cup Mouth Rolling Machine Usage: SP-135JB Cup Mouth Rolling Machine is assistant equipment for cup mouth edge rolling to most Cup Making Machine today. In today's market, th...
SP-15T Water Cooling Tower
 SP-15T Water Cooling Tower Model Height(mm) Diameter(mm) Base Dia.(mm) Motor Power Water Discharge(Inch) Weight Running Weight 15T 1860 1180 876*3feet 0.376KW 2 82Kg 320Kg
Hydraulic Lifter for the Moulds (1.5Ton)
 Hydraulic Lifter for the Moulds (1.5Ton) This machine just be used for unload the sheet roll and change the moulds.Hot tags: Hydraulic Lifter for the Moulds (1.5Ton)
供应产品

Same products

钢轨磨耗测量尺
 钢轨磨耗测量尺 卖方: 842518 LJ-GM系列数显式钢轨磨耗测量尺用于测量钢轨垂直磨耗和侧面磨耗量。釆用数显读数，合理的设计使它具有重量轻、操作方便、读数直观的特点。
道岔尖轨侧磨量及降低值检测尺
 道岔尖轨侧磨量及降低值检测尺 卖方: 842518 尖轨是转辙器中的重要部件，依靠尖轨的扳动，将列车引入正线或侧线方向。随着铁路运输不断向高速化和重载化方向发展，加速了道岔尖轨的磨损和报废，特别是尖轨的侧磨较为严重，要经常测量尖轨的磨耗状态，给出...
滑动式钢轨磨耗尺
 滑动式钢轨磨耗尺 卖方: 842518 LJ-HGM系列滑动式钢轨磨耗测量尺用于测量钢轨垂直磨耗值，侧面磨耗值和尖轨降低值。釆用数显读数，合理的设计使它具有重量轻、操作方便、读数直观的特点。
数显式 辙叉结构高度测量器
 数显式 辙叉结构高度测量器 卖方: 842518 LJ-ZC-A钢轨辙叉磨耗测量尺主要以辙叉两边的翼轨未磨耗面做为磨耗测量的基准面，分别测量辙叉心宽40mm断面处辙叉心垂直磨耗和翼轨垂直磨耗量。
尖心轨降低值测量尺
 尖心轨降低值测量尺 卖方: 842518 辙叉垂直磨耗测量尺用于测量辙叉心轨与翼轨磨损段任意部位的垂直磨耗值及心轨相对于翼轨的缩减值，具有测量精度高、现场工人容易掌握、可靠性高、体积小、重量轻等显著优点。