beam launcher bridge building equipment
Beam LauncherMain Features
◆ The beam Launcher has many advantages, such as light weight, high stiffness, low deflection, and high wind-resistance.
◆ Unique steel pin connection, which is not only firm, but also easy to install.
◆ Flexible steel legs, convenient to disassemble and transfer.
◆ The frequency-converter can be installed according to the user’s requirements.
◆ Customized Beam launcher for bridges with span ranging from 20m to 70m.
◆ Beam feeding from rear end of the beam launcher on the deck level or from below on ground level or from bridge side.
◆ All Series Beam launcher are designed to be fit into and deliver by 40 footer open top container.
◆ Beam launcher comes with centralize control system, multi-speed Crane, Hydraulic powered Support, Mechanical powered Self Advancing system
◆ Unique steel pin connection, which is not only firm, but also easy to install.
◆ Flexible steel legs, convenient to disassemble and transfer.
◆ The frequency-converter can be installed according to the user’s requirements.
◆ Customized Beam launcher for bridges with span ranging from 20m to 70m.
◆ Beam feeding from rear end of the beam launcher on the deck level or from below on ground level or from bridge side.
◆ All Series Beam launcher are designed to be fit into and deliver by 40 footer open top container.
◆ Beam launcher comes with centralize control system, multi-speed Crane, Hydraulic powered Support, Mechanical powered Self Advancing system
Prices vary a lot according to different specifications, please contact for details.
Huada Products:
A: Precast Bridge Launching Equipment
1.Beam Launcher
2.Overhead Segmental Launching Gantry
3.Underslung Segmental Launching Gantry
4.Segment Lifter
5.Full Span Launching Gantry
6.Cast in Situ Equipment
7.Overhead Movable Scaffolding System
8.Underslung Movable Scaffolding System
9.Overhead Form Traveller
10.Underslung Form Traveller
B:Casting Yard Equipment
1.Gantry Crane
2.Straddle Carrier
3.Tyre Transporter
4.Mould
C:General Industry Cranes
1.Double Girder Gantry Crane
2.Single Girder Gantry Crane
3.Double Girder Overhead Crane
4.Single Girder Overhead Crane
5.Electric Hoist
D:Port Cranes
1.Marine Hoist
2.Portal Crane
3.Rail Mounted Container Gantry Crane
4.Rubber Tyre Container Gantry Crane
A: Precast Bridge Launching Equipment
1.Beam Launcher
2.Overhead Segmental Launching Gantry
3.Underslung Segmental Launching Gantry
4.Segment Lifter
5.Full Span Launching Gantry
6.Cast in Situ Equipment
7.Overhead Movable Scaffolding System
8.Underslung Movable Scaffolding System
9.Overhead Form Traveller
10.Underslung Form Traveller
B:Casting Yard Equipment
1.Gantry Crane
2.Straddle Carrier
3.Tyre Transporter
4.Mould
C:General Industry Cranes
1.Double Girder Gantry Crane
2.Single Girder Gantry Crane
3.Double Girder Overhead Crane
4.Single Girder Overhead Crane
5.Electric Hoist
D:Port Cranes
1.Marine Hoist
2.Portal Crane
3.Rail Mounted Container Gantry Crane
4.Rubber Tyre Container Gantry Crane
在线联系供应商
Other supplier products
 |
100 ton to 300 ton bridge erection crane beam launcher for highway or railway | 100 ton to 300 ton bridge erection crane beam launcher for highway or railway is to lift the prefabricated beam slice and put it on the prefabricat... |
 |
Hot Sale Double Beam Rubber Tyred Mobile Gantry Cranes | Product Description Hot Sale Double Beam Rubber Tyred Mobile Gantry Cranes with diesel engine AC generator power supply, within the site w... |
 |
120 ton 150 ton bridge erecting building construction | Product Description 120 ton 150 ton bridge erecting building construction is used in the erection of precast beam bridges for span by span method ... |
|
|
柱式悬臂起重机5吨待售 | 5吨立柱式悬臂起重机是近年来开发的一种中小型起重设备。具有结构独特、运行安全可靠、效率高等特点。节能、和灵活性。5吨销售立柱吊臂起重机，可在三维环境下作业。它在短距离、集中举升的情况下性能优越。5吨立柱式悬臂起重机广泛应用于车间、仓库及各种固定场所。 我们的服务 1.整机保修一年。 ... |
|
|
定制龙门大梁施工下挂活动脚手架系统 | 产品描述 高架和悬挂式MSS都由一个自支撑结构和一个特定于项目的外部模板组合而成。龙门梁结构下悬式活动脚手架系统，适用于双T型到单箱、跨度20米到70米不等的截面。 我国龙门大梁施工下挂活动脚手架系统多年来的发展，源于降低我国施工人力成本的需要。今天，我们的现浇桥梁MSS可以为您的桥梁建设项目... |
Same products
 |
GT-JYH12 热流道CNC数控缩管机 | 卖方: 肇庆古雷特科技有限公司 | 产品说明 GT-JYH12 热流道CNC数控缩管机，主要用于热流道加热器、小型加热器的缩管加工。 主要参数 缩后直径：1.2–6mm 缩前最大直径：9mm ... |
 |
GT-JY18 18 段缩管机 | 卖方: 肇庆古雷特科技有限公司 | 产品说明 GT-JY18 型 18段缩管机是一款常用的管状加热器缩管设备，采用整体式铸铁床身。由于铸铁整体床身刚性好、强度高，不易变形，可保障设备长期稳定运行。 主要参数 ... |
 |
Multiple Blades Digital Label Cutter VR350 | 卖方: WILLIAM CNC TECHNOLOGY | Multiple Blades Digital Label Cutter VR350 The VICUT multiple blades digital die cutterVR350, eq... |
 |
Digital Label Die Cutting Machine VR240X | 卖方: WILLIAM CNC TECHNOLOGY | Digital Label Die Cutting Machine VR240X VR240X digital label finisheris redeveloped based on th... |
 |
Rotary die cutting machine VR320 | 卖方: WILLIAM CNC TECHNOLOGY | Rotary die cutting machine VR320 The VICUT VR320 roll to roll labels cutting machineis the most ... |
