High speed conventional heavy duty lathe price
High speed conventional heavy duty lathe price
This machine tool belongs to heavy machine tool,the maximum weight is 16 tons, adopt the rectangular guide rail, can be able to cut the end section of all kinds of parts,outer circle, inner hole and metric system, English system, modulus, state thread.
Main configuration:
StandardConfiguration:
1. Bed rail width 1100,Two top-load bearing 16 tons
Optionalconfigure:
1. Double saddle add another 80,000.
2. Roller additional price of 25,000 yuan
UNIT |
C61180 |
||
CAPACITIES |
Swing over bed |
mm |
1800 |
Swing over carriage |
mm |
1450 |
|
Max.length of workpiece |
mm |
3000-12000 |
|
Max.turning length |
mm |
2800-11800 |
|
Pan of guideway |
mm |
1100 |
|
Spindle nose |
mm |
A2-15 |
|
Spindle bore |
mm |
100 |
|
Taper hole of spindle |
Metric140 |
||
Range of spindle speeds |
r/min |
Forward:3.15~315;Reverse:3.5~291 |
|
SPINDLE |
No.of spindle speeds |
Forward:21; Reverse:12 |
|
No.of Longitudinal and cross |
56/56 |
||
Feed per revolution |
mm |
Longitudinal:0.1~12;Transverse:0.05~6;Up turret:0.025~3 |
|
No. and range of metric thread |
44;1~120mm |
||
No. and range of inch thread |
31;28~1/4″ |
||
No. and range of module thread |
45;0.5~60mm |
||
TAILSTOCK |
No. and range of dia. thread |
38;1/2~56DP |
|
Distance of centerline and tool resting plane |
mm |
53 |
|
Tool post swing range |
° |
±90° |
|
Max.travel of cross slide |
mm |
900 |
|
Max.travel of top slide |
mm |
360 |
|
Section of tool shank |
mm |
50(380x380) |
|
Travel of tool post (per turn of dials) |
mm |
0.05(0.002″) |
|
OTHERS |
Dia. of tailstock |
mm |
260 |
Travel of tailstock quill |
mm |
300(12″) |
|
Taper hole of tailstock quill |
Metric80 |
||
Main motor power |
kw |
30 |
|
Length |
mm |
6120-15120 |
|
Width |
mm |
2058-2580 |
|
|
Max.weight of workpiece |
t |
16 |
When the gear and gear ring are engaged, the four locking claws are connected, synchronously and at the same time, can hold the circular workpiece.When the gear and gear ring are separated, the four claws are independent, which are the same as the original four-jaw chuck.
Tail frame:mounted on the bed guide rail and moved vertically along this guide rail to adjust its position. The tail frame is mainly used to install the top, to support the long work piece, also can install the drill bit, reamer and so on the hole processing.
1. FOB Shanghai / Tianjin or CIF, LCL or FCL shipping.
2. Payment terms: T/T or other ways contact us.
3. Package: standard wooden case
4. Delivery time: Within 20 working days after the down payment. (Actual delivery time depends on actual order.
2. Check the acceptance
Receive machine,please check:
1. Examine the content of the packing list,the product quantity to both consistent,and accessories;
2. Machine tool details if they 're normal, If have the trace of replacement and maintenance, If have other effects use of the problem.
If happens above declare,please contact us immediately.
在线联系供应商
Other supplier products
drill pipe prodution line | DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by usi... | |
View larger image Chinese heavy duty lathe machine with good service Chinese heavy duty lathe machine with good service Chinese heavy duty lathe machine with good service Chinese heavy duty lathe mac | Chinese heavy duty lathe machine with good service This machine not only processing a variety of shaft, disk type parts and turning all kinds of ... | |
upsetter forging machine | DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by usi... | |
upset forging machine | DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by usi... | |
High speed conventional heavy duty lathe price | High speed conventional heavy duty lathe price This machine tool belongs to heavy machine tool,the maximum weight is 16 tons, adopt the rectangul... |
Same products
industrial sewing machine spares | 卖方: Zhejiang Huaqi Information Technology Co., LTD | Our spares are made from robust materials that can withstand the rigors of continuous use in indu... | |
Flat End Type of Thread EndSuction Machine | 卖方: 千实精密机电仪器检测设备有限公司 | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi ... | |
Fabric Friction Electric Charge Density Tester | 卖方: 千实精密机电仪器检测设备有限公司 | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi ... | |
Mask Air Exchange Pressure Difference Tester | 卖方: 千实精密机电仪器检测设备有限公司 | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi ... | |
Face Mask Tensile Testing Machine | 卖方: 千实精密机电仪器检测设备有限公司 | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi ... |