Swing over bed C61200 heavy duty lathe with good service
Swing over bed C61200 heavy duty lathe with good service
This machine tool belongs to heavy machine tool, the maximum weight is 16 tons, adopt the rectangular guide rail, can be able to cut the end section of all kinds of parts, outer circle, inner hole and metric system, English system, modulus, state thread.The machine is of high power and strong rigidity. It can be used to process all kinds of black and nonferrous metals by cutting with carbide knife.
Main configuration:
StandardConfiguration:
1. Bed rail width 1100,Two top-load bearing 16 tons
Optionalconfigure:
1.Double saddle add another 80,000.
2. Roller additional price of 25,000 yuan
|
UNIT |
C61200 |
||
|
CAPACITIES |
Swing over bed |
mm |
2000 |
|
Swing over carriage |
mm |
1650 |
|
|
Max.length of workpiece |
mm |
3000-12000 |
|
|
Max.turning length |
mm |
2800-11800 |
|
|
Pan of guideway |
mm |
1100 |
|
|
Spindle nose |
mm |
A2-15 |
|
|
Spindle bore |
mm |
100 |
|
|
Taper hole of spindle |
Metric140 |
||
|
Range of spindle speeds |
r/min |
Forward:3.15~315;Reverse:3.5~291 |
|
|
SPINDLE |
No.of spindle speeds |
Forward:21 Reverse:12 |
|
|
No.of Longitudinal and cross |
56/56 |
||
|
Feed per revolution |
mm |
Longitudinal:0.1~12;Transverse:0.05~6;Up turret:0.025~3 |
|
|
No. and range of metric thread |
44;1~120mm |
||
|
No. and range of inch thread |
31;28~1/4″ |
||
|
No. and range of module thread |
45;0.5~60mm |
||
|
TAILSTOCK |
No. and range of dia. thread |
38;1/2~56DP |
|
|
Distance of centerline and tool resting plane |
mm |
53 |
|
|
Tool post swing range |
° |
±90° |
|
|
Max.travel of cross slide |
mm |
900 |
|
|
Max.travel of top slide |
mm |
360 |
|
|
Section of tool shank |
mm |
50(380x380) |
|
|
Travel of tool post (per turn of dials) |
mm |
0.05(0.002″) |
|
|
OTHERS |
Dia. of tailstock |
mm |
260 |
|
Travel of tailstock quill |
mm |
300(12″) |
|
|
Taper hole of tailstock quill |
Metric80 |
||
|
Main motor power |
kw |
30 |
|
|
Length |
mm |
6120-15120 |
|
|
Width |
mm |
2058-2580 |
|
|
|
Max.weight of workpiece |
t |
16 |
- high speed high efficiency
- strong adaptability high quality
- high precision good rigidity
“We haven’t replaced any spare part after continuous running for10months.Everything is still in perfect condition so far!”
--Mrs. carrelin
“The quality of the equipment is good,and maintenance operation is convenient.”
--Mr. Chen
“The equipment quality is satisfactory, the company's service is good, we can not meet the problem.”
--Mr.Fernanda
Company Information:
Anyang Xinheng Machine Tool Co. Ltd.is a large professional manufacturer of LATHE, CNC LATHE, PIPE THREAD LATHE, SPHERE TURNING LATHE etc.
Our factory has 60 years experience in machine tool production.And our machine tools have been exported to more than 50 countries.
Web:
Tel: +86 372 3700288
在线联系供应商
Other supplier products
 |
High quality cnc turning lathe price | High quality cnc turning lathe price This series iseconomical and practical CNC lathe,which are not only suitable for all kinds of complex shape ... |
 |
Good applicability conventional lathe specifications | Good applicability CW6280B conventional lathe specifications The horizontal lathe series mainly applies to the inner and outer cylinder, the con... |
 |
tubular upsetting press | DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by usi... |
 |
upset forging machine | DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by usi... |
 |
tubular upsetting equipments | DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by usi... |
Same products
 |
尖心轨降低值测量尺 | 卖方: 842518 | 辙叉垂直磨耗测量尺用于测量辙叉心轨与翼轨磨损段任意部位的垂直磨耗值及心轨相对于翼轨的缩减值，具有测量精度高、现场工人容易掌握、可靠性高、体积小、重量轻等显著优点。 |
 |
便携式激光弦线 | 卖方: 842518 | 激光准直仪用于测量轨道水平和线路，以辅助轨道测量和人工捣固作业。它可以测量水平和垂直。它主要由激光发射装置、靶标定位装置和移动定位靶标装置组成。 |
 |
轨底坡测量装置 | 卖方: 842518 | Основная часть катания колеса имеет наклон внутрь 1:40. Для того чтобы верхняя часть рельсового п... |
 |
NGM-6.3II型内燃钢轨打磨机 | 卖方: 842518 | 该机主要用于铁路钢轨维护施工中的焊缝恢复打磨、压延毛刺、轨面修复、波形磨损等。该机不仅仿形精度、打磨效率等技术性能有较大提高，而且由于数控进给单元的开发应用，实现了砂轮进给的智能控制，大大简化了... |
 |
NCM-5.1型内燃道岔打磨机 | 卖方: 842518 | NCM-5.1道岔打磨机是专门针对道岔、交叉口及轨头两侧的打磨作业而设计的。该机打磨装置可从垂直方向向左右倾斜30°，并可沿纵横方向调整打磨轮的位置，使该机打磨装置在钢轨间狭小空间内也能... |
