high precision
Automatic valve hot forging machineis a highly efficient automatic machine for producing complex blanks. The raw materials are used to select the copper rod of ø 15- ø 30, and after automatic heating, cutting, stamping and discharging, the blank is finally finished. Then using our CNC lathe machine to machining the valve products.
Drive mode: motor
Number of operators:1 person operates 2 machines
Motor voltage: 380v
Productivity:30-100 per minute (depending on product size)
Stamping force: 60kn-300kn
Pass rate:98%
Layout format: horizontal
Slider travel: 100-300mm
Material: Diameter of 15-30 copper rods
在线联系供应商
Other supplier products
 |
Chinese high speed precision cnc lathe for sale | Chinese high speed precision cnc lathe for sale These series are economical CNC horizontal lathe, which are not only suitable for automobiles, tr... |
 |
Homemade new Dia. of spindle hole 130mm spherical turning lathe on sale | Homemade new C6595 Dia. of spindle hole 130mm spherical turning lathe on sale The spherical lathe is mainly used for the turning machining of sp... |
 |
CW61125B Swing over bed 1250mm conventional lathe made in china | CW61125B Swing over bed 1250mm conventional lathe made in china This series lathe is suitable for large and medium parts processing for castings,... |
 |
Automatic control | DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by usi... |
 |
Low production cost | Product Description: Automatic bearing outer ring inner race production line: XSPT-002 bearing ring automatic line with three ADJ15P CNC lathes a... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
