Q1313 Pipe Threading Lathe Machine
Q1313Pipe Threading Lathe Machine
Lathe Machine
The main performance characteristics：
Big spindle bore and double chuck allows clamp and process big diameter pipes;Integral machine bed adopts high strength iron to relize high rigidity and precision;Ultrasonicfrequencyquenchedguide-waysarehardenoughforgoodwear-resistance;Equiped with taper guide bar device this enables the machine to process taper threads.
Application:
Q13series pipe threading lathe machineis mainly used for turning the internal and external threadsincluding metric and inch thread,as well as having all the common functions of normal engine lathe such as processing the inner bore and end face of shafts and disks,this machinery is equipped with taper guide bar device which enables this series to process taper thread.This series lathe machine is widely used in industries including petroleum exploiting ,coal and minerals mining,chemical piping and geological prospecting,it is high-efficiency equipment in processing and repairing drilling pipe,drilling rod,thread coupling and so on.
Standard accessories:
Tool post,Tailstock,Chuck,taper guide bar,Lighting lamp,Coolant pump,Rear support bracket,Pad iron etc.
Optionalaccessories:
Digital readout,Chuck,Faceplate,Chasing dial,Center rest,Signal light,Protective cover(lead-screw,chuck,tool post),and Grinding attachment etc.
Product main technical parameters:
|
Specifications |
UNIT |
Q1313 |
|
|
Capacity |
Swing over bed |
mm |
630/800 |
|
Swing over cross slide |
mm |
340/540 |
|
|
Distance between centers |
mm |
1500/3000 |
|
|
Pipe threading range |
mm |
Ø30-126 |
|
|
Width of bed way |
mm |
550 |
|
|
T |
3 |
||
|
Spindle |
Spindle bore |
mm |
Ø130 |
|
Spindle speed steps |
- |
||
|
Spindle speed range |
rpm |
12-642/19-800 |
|
|
Chuck size |
mm |
400 |
|
|
Chuck type |
- |
3-jaw manual |
|
|
Turret |
Turret type |
- |
Manual 4 position |
|
Tool shank size |
mm |
32x32 |
|
|
Turret travel |
mm |
200 |
|
|
Carriage |
X axis feed grade/range |
mm/r |
22/0.02-0.45 |
|
Z axis feed grade/range |
mm/r |
26/0.07-1.33 |
|
|
X axis rapid traverse speed |
mm/min |
2300 |
|
|
Z axis rapid traverse speed |
mm/min |
4000 |
|
|
X axis travel |
mm |
320 |
|
|
Z axis travel |
mm |
1310/2810 |
|
|
Tailstock |
Tailstock quill diameter |
mm |
100 |
|
Tailstock quill taper |
- |
MT#5 |
|
|
Tailstock quill travel |
mm |
250 |
|
|
Motors |
Main spindle motor |
kW |
|
|
Rapid traverse motor |
kW |
||
|
Coolant pump motor |
kW |
||
|
Thread |
Metric thread grade/range |
mm |
52/1-24 |
|
Inch thread grade/range |
40/2-28 |
||
|
Dimensions |
Width x Height |
mm |
1360X1480 |
|
Length |
mm |
3657/5157 |
|
在线联系供应商
Other supplier products
|
|
CJM250 Mini Lathe Machine | CJM250Mini Lathe Machine mini lathe,Bench Lathe Lathe Machine Product description: ，widelyusefulhobbylathe.2.Powerlongitudinalfeedallowsthreading.... |
|
|
QK1313 CNC Pipe Threading Lathe Machine | QK1313CNC Pipe Threading Lathe Machine CNC Lathe Machine CNC Pipe Threading Lathe China The main performance characteristics： Big spindle bore and ... |
 |
Heavy Duty CNC Lathe Machine | CK6163EHeavy Duty CNC Lathe Machine Flat Bed CNC Lathe Machine CNC Lathe Machine Product main features and uses： This Heavy Duty CNC Lathe Machinec... |
|
|
XK6325 CNC Turret Milling Machine | XK6325CNC Turret Milling Machine CNC Vertical Milling Machine The main performance characteristics： Specifications unit XK6325 Table s... |
|
|
XH2316 CNC Gantry Machining Center | XH2316CNC Gantry Machining Center CNC Machining Center The main performance characteristics： 1 the spindle of the machine tool adopts the high prec... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
