Automatic Recycling Sand Blasting Room
Automatic Recycling Sand Blasting Room
Product Description
Automatic RecyclingSand Blasting Room
Discription:
is a closed space, includes blasting system, abrasive circulatory system and rust removal system, etc. is mainly used for surface cleaning and strengthening of steel, castings, aluminum alloy parts and other parts.Through the shot blasting can remove the complex work piece surface contamination, the oxide skin, welding slag, the waste paint and so on, causes the work piece surface to be bright and clean, simultaneously reduce the work piece internal stress, enables the work piece surface to obtain the strengthening, thus achieves enhances the work piece surface and the intrinsic quality goal.
features:
|
1 |
Improve the corrosion resisting ability of machinery products and metal materials. |
|
2 |
Improve bonding strength of steel surfaces and coatings. |
|
3 |
Increase the anti-fatigue capability of metal products and extend its life. |
|
4 |
Optimize the craftwork state of steel surface. |
|
5 |
Greatly enhance the efficiency of cleaning. |
|
6 |
Reduce the labor intensity of cleaning works. |
|
7 |
Reduce the environment pollution. |
structural character of:
A: As following is equipment structural character:1. Sand blasting systemWe fully take into account the operation convenience of the workers, specifically increased the sand blasting chamber operating space, set lighting system and platform, so that workers can operate convenient, effective and comprehensive.2. Bucket ElevatorThe bucket elevator consists of speed reducer, upper and lower rolling barrel, transmission rubber belt, bucket elevator, enclosure and tightening device, etc.3. SeparatorThis machine adopts advanced Model BE full shutter type separator. The separator is mainly composed of airwash area, barrel sift, conveying screw, abrasive hopper, manual abrasive controlling valve.4. Abrasive recycling systemThis adopts the patented shot valve produced of our company; it can accumulate a certain time in blasting, through the manual control to provide the shot ball to the blasting device.5. Dust removal systemThis adopts Cartridge or bag type dust collector, is exhausted air produced during working. The dedusting efficiency is up to 99.6%, powder density is less than 100mg/m3,much stricter than the national standard.6. Electric control systemSet shot ball circulatory failure alarm function, if any parts of the system fails, the above components automatically stop running, to prevent the shot ball stuck and burning power device.
Tags
shot blasting equipment, sand blasting roomsand blasting booth, Sand Blasting Shot Peening Machine,
在线联系供应商
Other supplier products
 |
Steel Plate Shot Blasting Machine | It is mainly used for surface treatment(namely preheating,rust removal,paint spraying and drying )of steel plate and various structural sections,a... |
 |
Hydraulic Thick Plate CNC Turret Punching Machine | Hydraulic Thick Plate Product Description： is mechatronics automation equipment, it's widely used in the chassis cabinets processing, air conditio... |
 |
CNC Turret Punching Machine | Product description: O-type closed press frame special for servo punch press, holistic welding structure, stre... |
 |
Industry Floor Coating Pretreatment Blasting Machine/ Road Surface Floor Shot Blasting Machine | Industry Floor Coating Pretreatment Blasting Machine/ Steel shots in the lower part of the separation box goes into the blasting components throug... |
 |
Hydraulic Thick Plate CNC Punching Machine-PuHua | What is Hydraulic Punching Machines? As the name suggests, uses oil as the working medium, uses the pressure energy of the oil and controls the h... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
