Garri Processing Machinery
Cassava Garri(Gari) Process Description and Flowchart:
Garri is a fermented and gelatinized dry coarse flour, very popular in West Africa and a staple food in Nigeria, Ghana, Benin, and Togo. Its ability to store well and its acceptance as a "convenience food" is responsible for its increasing popularity in the urban areas of West and Central Africa. It is often consumed as the main meal in the
form of a dough or a thin porridge. Both are prepared in the household by mixing dry Garri with hot or cold water and cooking and are served with soup or stew. Garri is also eaten as a snack when mixed in cold water with sugar, and sometimes milk. It swells three to four times its volume when mixed with cold water.
Goodway delivers the whole range of equipment for Garri processing industry from Garri processing machinery to complete the Garri productionline. Multiple distinct operations are required in Garri processing: washing, peeling, grating, de-watering, breaking & sifting, Garri roasting, milling, and packaging.Our company's garri processing machine costis very cheap, suitable for the public to buy.
We provide below a brief description of the main steps of the Garri production process.
Cleaning and Washing Cassava Roots
Wash the fresh cassava roots in clean water to remove the surface mud and sand. It's the first step of Garri(gari) process and very important for the quality of final Ggarri(gari).
Peeling Cassava Roots
Peeling Cassava Roots
Peel the washed cassava roots to remove the outer brown skin and inner thick cream layer. The water source should be checked regularly to ensure it is not dirty or contaminated.
Grating Peeled Cassava Roots into Mash
Grating Peeled Cassava Roots into Mash
Load the grater with washed roots while the engine is running to grate peeled cassava roots into mash. The grating drum and all food contact areas should be made
from stainless steel.
Fermenting Mash on the Fermentation Rack
Fermenting Mash on the Fermentation Rack
Collect the cassava slurry into a clean polythene sack and tie, then bagged cassava slurry can be left in the fermentation rack for one or more days before de-watering, allow the milky water to drain freely from the bags.
De-watering Mash into Wet Cake
De-watering Mash into Wet Cake
Load the bags directly on to a hydraulic press. Lift and press the jack handle up and down until it becomes hard to move. Repeat the process several times each day until no more water comes out of the bag to produce a firm wet cake.
Breaking Wet Cake and Sifting Wet Cake into Grits
Breaking Wet Cake and Sifting Wet Cake into Grits
Breaking the wet cake into small pieces (grits) and remove the lumps to obtain uniform size grits(wet coarse Garri). All food contact areas should be made from stainless steel
Roasting Grits into Dried Coarse Garri(Gari)
Roasting Grits into Dried Coarse Garri(Gari)
Roasting the wet grits into dried coarse Garri(gari) with low moisture content using an automated Garri fryer made of stainless steel material and with electricity, natural gas, firewood or charcoal as the heat source. The final Garri(gari) is usually recognized from the color of palm oil fortified Garri or non-palm oil fortified Garri and crispy hand feel of particles.
Milling Coarse Garri into Fine Garri(Gari)
Milling Coarse Garri into Fine Garri(Gari)
Milling the dried coarse Garri into fine Garri(gari) with the uniform size, then pour the fine Garri into a plastic lining inside a woven polythene sack.
在线联系供应商
Other supplier products
 |
Dewatering and Drying System | The section of dewatering and drying has come to final steps of cassava processing, the vacuum dehydrator can remove as much moisture as possible a... |
 |
Cassava Peeling Machine 2019 | Features of Cassava Peeling Machine Processing Capacity: 4-6Tons/hour Application Scope: Fresh cassava peeling and washing Product Introduction: C... |
 |
Cassava Vibrating Sieve | Features of Cassava vibro sifter sieves Break the pressed cassava cakes into granules and separate the uniform size granules from the lumps to obt... |
 |
Cassava Presser | Cassava Presser ZTZY screw progressive extrusion separator is a continuous operation press separator for organic material extrusion liquid and ino... |
 |
Cassava Crusher | During the production process of fresh cassava, the crushing section is very important for the quality of final products, the cassava crushermachin... |
Same products
 |
GT-DG250 轧辊机 | 卖方: 肇庆古雷特科技有限公司 | • 产品描述 GT-DG250 缩管机采用一组对辊组件，根据需求加工孔位，逐孔逐级（由大到小）对管材进行缩径。可用于加工铜、铁、不锈钢、铝等材质的圆管、方管、扁管、椭圆管。 &bu... |
 |
Double Spindle Lathe NL251D | 卖方: Lecn Anhui Co., Ltd | A is an advanced CNC lathe equipped with two spindles, typically referred to as the main spindle ... |
 |
Automobile Torsion Beam Milling Machine X8220125 | 卖方: Lecn Anhui Co., Ltd | Both ends of the one clamping are processed at the same time, the with 1250-1550 mm workpiece len... |
 |
Joint Cross Machine CZ821030/TZ820510 | 卖方: Lecn Anhui Co., Ltd | Both ends of the one clamping are processed at the same time, the with 100-300 mm workpiece lengt... |
 |
Break Cam Milling Machine CM0525 | 卖方: Lecn Anhui Co., Ltd | can precision milling cam diameter of 250 mm, which is suitable for milling automobile brake cams... |
